Hitachi CN7821-Y Instruction Manual

S

PCI-Express Dual Port 10 Gigabit

LAN Card

Instruction Manual

(Model: CN7821-Y)

F

ASTFIND

Document Organization

Getting Help

Contents

MK-90CRS011-01

L

INK

Copyright © 2013 Hitachi, Ltd.
ALL RIGHTS RESERVED

No part of this publication may be reproduced or
transmitted in any form or by any means, electronic
or mechanical, including photocopying and
recording, or stored in a database or retrieval
system for any purpose without the express written
permission of Hitachi, Ltd. (hereinafter referred to
as "Hitachi").

Hitachi reserves the right to make changes to this
document at any time without notice and assumes
no responsibility for its use. This document contains
the most current information available at the time of
publication. When new and/or revised information
becomes available, this entire document will be
updated and distributed to all registered users.

All of the features described in this document may
not be currently available. For information about
features and product availability, refer to the most
recent product announcement or contact <contact
information>.

Notice: Hitachi products and services can be ordered
only under the terms and conditions of Hitachi's
applicable agreement(s). The use of Hitachi products
is governed by the terms of your agreement(s) with
Hitachi.

Hitachi is a registered trademark of Hitachi, Ltd. in
Japan and other countries.

Hitachi Compute Rack (hereinafter referred to as
"Compute Rack ".) is a trademark of Hitachi.

All other trademarks, service marks, and company
names are properties of their respective owners.

Microsoft product screen shots are reprinted with
permission from Microsoft Corporation.

ii

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Contents

Regulatory compliance notices .............................................................................vi

Federal communications commission (FCC) compliance (U.S.A)........................ vi

Canadian compliance statement (Canada) ......................................................vi

European union notice (EU)........................................................................... vi

Acoustics noise (Germany) ............................................................................vi

Product recycling and disposal (EU and Norway) (Waste Electrical and Electronic

Equipment Directive 2002/96/EC [WEEE]) ..................................................... vii

Chinese RoHS.............................................................................................. vii

電波障害自主規制 (Japan) .......................................................................... viii

Class A emission statement (Korea) ............................................................. viii

BSMI compliance (Taiwan) .......................................................................... viii

Laser compliance notice .............................................................................. viii

International compliance ............................................................................... ix

Intended audience ...............................................................................................x

Document revision level........................................................................................x

Document organization.........................................................................................x

Document conventions ........................................................................................ xi

Safety information............................................................................................... xi

Getting help........................................................................................................ xi

Comments......................................................................................................... xii

Safety information............................................................................................. xiv

Common precautions concerning safety ............................................................... xv

General safety precautions.................................................................................. xv

Precautions against damage to this product..........................................................xv

Precautions Marks in This Manual ....................................................................... xvi

Before use ........................................................................................... 1-1

For your confirmation ........................................................................................1-2

Product overview.................................................................................. 2-1

Features...........................................................................................................2-2

Contents iii

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Names and function of components........................................................3-1

Names and functions ........................................................................................ 3-2

Installing the Card.................................................................................4-1

System configuration and installation procedure.................................................. 4-2

How to connect the Card .................................................................................. 4-2

Connecting a LAN cable.............................................................................. 4-2

Installing a driver ..................................................................................5-1

Windows 2008 R2 environment ......................................................................... 5-2

Procedure for installing the driver for Windows 2008 R2 ............................... 5-2

Troubleshooting ....................................................................................6-1

Specifications........................................................................................7-1

Hardware specifications .................................................................................... 7-2

iv Contents

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Preface

This manual describes how to install and handle the Hitachi PCI-Express Dual
Port 10 Gigabit LAN Card (hereinafter referred to as the LAN Card).

 Regulatory compliance notices

 Intended audience

 Document revision level

 Document organization

 Document conventions

 Safety information

 Getting help

 Comments

Notice: The use of the Compute Rack is governed by the terms of your
agreements with Hitachi.

Preface v

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Regulatory compliance notices

Federal communications commission (FCC) compliance (U.S.A)

Note: This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

The user is cautioned that changes or modifications not expressly approved by

the manufacturer could void the user's authority to operate the equipment.

Canadian compliance statement (Canada)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

European union notice (EU)

Products with the CE Marking comply with both the EMC Directive

(2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the

Commission of the European Community.

Compliance with these directives implies conformity to the following European

Norms (the equivalent international standards are in parenthesis):

• EN55022 Class A Limit-Electromagnetic Interference

• EN55024 (EN61000-4-2, 3, 4, 5, 6, 8, 11)-Electromagnetic Immunity

• EN61000-3-2, 12-Power Line Harmonics

• EN61000-3-3-Power Line Flicker

• EN60950-1 (IEC60950-1)-Product Safety

Warning: This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

Acoustics noise (Germany)

Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste

Schalldruckpegel beträgt 63 dB(A) oder weniger gemäss EN ISO 7779.

vi Preface

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Product recycling and disposal (EU and Norway) (Waste Electrical and Electronic Equipment Directive 2002/96/EC [WEEE])

The following mark on Products indicates that these Products are to be
collected separately and to be recycled or discarded according to applicable
local and national regulations. For further information regarding return,
collection, recycle or disposal, please contact your sales company where you
purchased the Products.

Note: The above regulation / marking applies only to countries within the

European Union (EU) and Norway.

Chinese RoHS

有毒有害物质和元素的名称及含量

有毒有害物质和元素

零件名称

伺服器底座 × ○ ○ ○ ○ ○
刀鋒型伺服器 × ○ ○ ○ ○ ○
管理模块 × ○ ○ ○ ○ ○
局域网交換机模块 × ○ ○ ○ ○ ○
光纤交换机模块 × ○ ○ ○ ○ ○
网络路径模块 × ○ ○ ○ ○ ○
电源模块 × ○ ○ ○ ○ ○
分电盘 × ○ × ○ ○ ○
○：表示该零件的所有均质材料中的有毒有害物质的含量在 SJ/T 11363-2006

标准规定的限量範囲内。

×：表示该零件的某一均质材料中的有毒有害物质的含量超出 SJ/T 11363-2006

标准规定的限量範囲。

铅

（Pb）汞 （Hg）镉 （Cd）

六价铬

（Cr(VI)）

多溴联苯

（PBB）

多溴二苯醚

（PBDE）

Preface vii

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

電波障害自主規制 (Japan)

本製品は、クラス A 情報技術装置です。本製品を家庭環境で使用すると電波障害を引き起

こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあ

ります。

Class A emission statement (Korea)

이 기기는 업무용(A급) 전자파적합기기로서 판
매자 또는 사용자는 이 점을 주의하시기 바라
며, 가정외의 지역에서 사용하는 것을 목적으로
합니다.

Applicant / 상호명：LG Hitachi Ltd. / LG히다찌(주)
Manufacturer / 제조자：HITACHI, LTD.
Origin / 제조국：Japan / 일본

BSMI compliance (Taiwan)

VCCI-A

警告使用者：

此為甲類資訊技術設備，於居住環境中使用時，

可能會造成射頻擾動，在此種情況下，

使用者會被要求採取某些適當的對策。

法規遵循公告

Laser compliance notice

This product may be provided with an optical storage device (that is, CD or

DVD drive) and/or fiber optic transceiver. Each of these devices contains a

laser that is classified as a Class 1 Laser Product.

viii Preface

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

International compliance

No Standard / Marking Classification Country

1 UL 60950-1

2 FCC 47 CFR Part 15 Class A Limit

This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.

3 EMC Directive

(2004/108/EC, formerly 89/336/EEC)

EN55022 Class A Limit

EN55024

EN61000-3-2, EN61000-3-12

EN61000-3-3

Low Voltage Directive

(2006/95/EC, formerly 73/23/EEC)

EN60950-1

4 CB IEC 60950-1 Safety International

Safety

EMC

Safety /

EMC

U.S.A

Europe

Preface ix

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Intended audience

This document is intended for the personnel who are involved in planning,

managing, and performing the tasks to prepare your site for Compute Rack

installation and to install the same.

This document assumes the following:

• The reader has a background in hardware installation of computer systems.

• The reader is familiar with the location where the Compute Rack will be

installed, including knowledge of physical characteristics, power systems and
specifications, and environmental specifications.

Document revision level

Revision Date Description

00 May 2012 Preliminary release

01 December 2012 Secondary release

Document organization

The table below provides an overview of the contents and organization of this

document. Click the chapter title in the left column to go to that chapter. The

first page of each chapter provides links to the sections in that chapter.

Chapter Description

Chapter 1, Before use

Chapter 2, Product overview Describes the product overview.

Chapter 3, Names and function of

components

Chapter 4, Installing the Card Describes how to install the Card on the system unit.

Chapter 5, Installing a driver

Chapter 6, Troubleshooting Describes how to address malfunctions of the LAN Card.

Chapter 7, Specifications Describes main specifications of the Card.

Describes what you should be familiar with before connecting
and setting this Card.

Describes the names and functions of components of this Card.

Read this chapter before you install the Card on the system unit.

Describes how to install the network driver of the LAN Card in
the Windows 2008 R2 environment.

x Preface

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Document conventions

The term “Compute Rack” refers to all the models of the Compute Rack,
unless otherwise noted.

This document uses the following typographic conventions:

Convention Description

Bold

Italic

screen/code

< > angled brackets

[ ] square brackets

{ } braces

| vertical bar

underline Indicates the default value. Example: [ a | b ]

Safety information

Indicates text on a window, other than the window title, including menus, menu
options, buttons, fields, and labels. Example: Click OK.

Indicates a variable, which is a placeholder for actual text provided by the user or
system. Example:

Note: Angled brackets (< >) are also used to indicate variables.

Indicates text that is displayed on screen or entered by the user.
Example:

Indicates a variable, which is a placeholder for actual text provided by the user or
system. Example:

Note: Italic font is also used to indicate variables.

Indicates optional values. Example: [ a | b ] indicates that you can choose a, b, or
nothing.

Indicates required or expected values. Example: { a | b } indicates that you must
choose either a or b.

Indicates that you have a choice between two or more options or arguments.
Examples:

[ a | b ] indicates that you can choose a, b, or nothing.

{ a | b } indicates that you must choose either a or b.

# pairdisplay -g oradb

copy source-file target-file

# pairdisplay -g <group>

Before replacement, read the Safety Guidelines in this document.

Getting help

When you contact Hitachi Data Systems, provide as much information about
the problem as possible, including:

• The circumstances surrounding the error or the failure

• The exact content of any error message displayed on the host system

Compute Rack

• The service information messages, including reference codes and severity

levels, displayed and/or logged at the Compute Rack

The Hitachi Data Systems support staff are available 24 hours a day, seven days a
week. For technical support, visit the portal site at https:\\portal.hds.com. For
contact information, visit www. hds.com.

Preface xi

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Comments

Please send us your comments on this document, if any, by e-mail to:

[e-mail].

Make sure that the e-mail includes the document title and number,

revision, and section(s) and paragraph(s) whenever possible.

Thank you! (All comments become the property of Hitachi.)

xii Preface

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Safety guidelines

This section contains warnings and important safety guidelines for using a
Hitachi Compute Rack System. Read and understand the information in this
section before removing, replacing and installing system components.

This section includes the following key topics:

 Safety information

 Common precautions concerning safety

 General safety precautions

 Precautions against damage to this product

 Precautions Marks in This Manual

Safety guidelines xiii

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Safety information

This document uses the following symbols to emphasize certain information.

Symbol Label Description

NOTICE

WARNING

CAUTION

NOTICE

Note

Tip This indicates advice on how to make the best use of the equipment.

This indicates the presence of a potential risk that might cause death or
severe injury.

This indicates the presence of a potential risk that might cause relatively
mild or moderate injury.

This indicates the presence of a potential risk that might cause severe
damage to the equipment and/or damage to surrounding properties.

This indicates notes not directly related to injury or severe damage to
equipment.

Fire Hazard

Electric Shock
Hazard

Hot Surface Hot Surface indicates the risk of a serious burn by high temperature.

Laser Hazard

General
Prohibition
Sign

Disassembly
Prohibition
Sign

General
Mandatory
Sign

This warns fire hazard. Take appropriate precautions to prevent the risk
of catching a fire.

This warns electric shock hazard. Failure to take appropriate precautions
could result in serious injury or death.

This warns laser hazard. Failure to take appropriate precautions could
result in invisible laser radiation.

This indicates the general prohibition.

This indicates not to allow customer to disassemble component.

This indicates a general action to take. Action by following the
instructions in this guide.

Unplug Power
cord

This indicates unplugging the power cable from the outlet to avoid
electric shock and fire.

xiv Safety guidelines

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Common precautions concerning safety

Please carefully read through these safety instructions to follow:

• When operating the equipment, follow the instructions and procedures

provided in the manual.

• Be sure to follow notes, cautionary statements and advice indicated on the

equipment or in the manual.

• Referring to manuals attached to other products which you install in or

connect to the equipment, follow the instructions described in those
manuals.

Failure to follow those instructions can cause injury, fire or damage to property
including the equipment.

General safety precautions

Plastic shipping bag

Do not leave the plastic shipping bag of this product such as Air Cap within
reach of children. If they get the bag over their head, they can be
suffocated.

Laser beam

This product emits laser beam. Do not disassemble or modify this product.
Or do not peer inside. Doing so may cause visual loss or blindness. (The
laser beam cannot be seen by your eyes.)

Precautions against damage to this product

Impact due to dropping, etc

Safety guidelines xv

Avoid excessive impact such as dropping or banging the equipment.
Deformation or deterioration may occur, which may cause smoke or
malfunction.

Contact with connector terminals

Never touch connector terminals with hand or with a metal. Nor insert a
foreign material such as wire. Also, do not put this product on metal chips.
Otherwise, smoke or contact failure may be caused.

Contact with connector terminals

Never touch connector terminals with hand or with a metal. Nor insert a
foreign material such as wire. Also, do not put this product on metal chips.
Otherwise, smoke or contact failure may be caused.

Countermeasure against static electricity

Before handling this product, discharge static electricity from your body by

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

touching a metallic part such as a door knob, or wear cotton gloves.
Otherwise, static electricity may damage the equipment.

Mounting this product

Mount and use this product in a system unit that supports installation and
operation of this product. If mounted in any other system, this product
causes a failure due to difference in connection specifications. For
information about which system units support this product, see the manual
of the individual system unit.

Precautions Marks in This Manual

Not used in this manual.

Signal cables

■ Lay the cables carefully to prevent your foot from being snagged by
them. If you stumble over the cable, it may cause personal injury or
malfunction of the connection devices. Also it may cause the data to be
lost.

NOTICE

■ Do not put something heavy on the cable. Do not lay the cable near a
heater. The cable coating may be damaged which may cause a failure of
the connected equipment. See page 4-2

Laser beam

Connecting a LAN cable.

 On this product, a Class 1 laser defined by IEC60825-1 product is
installed. Do not look directly at the laser beam. Do not look at the laser
beam using an optical device.

 Under the laser module cover, a laser beam is being emitted.
Do not remove the cover of an unused card.

Not used in this manual.

xvi Safety guidelines

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

1

Before use

This chapter provides the information you have to know before connecting and
setting the LAN Card.

 For your confirmation

Before use

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

1-1

For your confirmation

Confirm the following matters before use. If you should have a problem with

the product, contact the sales representative.

• Is it the model or type you ordered?

• Are there any parts damaged during shipping?

• Are all the accessories of the Accessory List included in the package?

If an enclosed sheet of additional information is included, be sure to read it.

1-2 Before use

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

2

Product overview

This chapter describes the product overview.

 Features

Product overview

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

2-1

Features

This card is used by being attached to the PCI-Express expansion slot

(hereinafter referred to as PCI slot) of the system unit. This product has the

following features.

• It supports 10GBASE-SR(IEEE802.3ae) and equipped with 2 ports for

• It is connected with the cable of Multi Mode Fibre.

network interface connectors.

PXE/iSCSI boot:
This Card does not support a PXE/iSCSI boot.

Wake On LAN:
This Card does not support Wake On LAN.

PCI Hot-Plug function:
This Card does not support a PCI Hot-Plug function.

Teaming:
When you create LAN teaming, please use double of this card. Teaming

with 1GLAN Card is not supported.

2-2 Product overview

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

3

Names and function of components

This chapter describes the names and functions of components of this Card.
Read this chapter before you install the Card on the system unit.

 Names and functions

Names and function of components

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

3-1

Names and functions

Figure 3-1

LINK/ACT

(3)

(1)

LINK/ACT

(2)

(1) SFP+ module

(2) ACT/LNK LED

LED Color Status Indication

ACT/LNKx

(Portx:A or B)

- Off Not establish a link

On Established a link Green

Blink Now sending/receiving data

(3) MAC address

1st to 12th digits obtained from IEEE (one MAC address possessed)

3-2 Names and function of components

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

4

Installing the Card

This chapter describes how to install the Card on the system unit.

 System configuration and installation Prosedure

 How to connect the Card

Installing the Card

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

4-1

System configuration and installation procedure

Install the LAN Card into the PCI slot of the system unit. For the procedures to

install the system unit, see the manual supplied with the system unit.

When this Card is replaced, its unique information (example: MAC
address) is changed.

How to connect the Card

This section describes how to connect the Card.

Signal cables

■ Lay the cables carefully to prevent your foot from being snagged by
them. If you stumble over the cable, it may cause personal injury or
malfunction of the connection devices. Also it may cause the data to be
lost.

■ Do not put something heavy on the cable. Do not lay the cable near a
heater. The cable coating may be damaged which may cause a failure of
the connected equipment. See page 4-2 Connecting a LAN cable.

Laser beam

 On this product, a Class 1 laser defined by IEC60825-1 product is
installed. Do not look directly at the laser beam.
Do not look at the laser beam using an optical device.
 Under the laser module cover, a laser beam is being emitted.
Do not remove the cover of an unused card.

Connecting a LAN cable

Use the LAN cables listed in the following table to connect the LAN Card. Do

not use any other cable.

Table 4-1

specifications Maximum Cable Length Connector Type

Multi Mode Fibre

Core size: 50um
Cladding size:125um
Wave length:850nm
Bandwidth:2000MHz

Do not connect LAN cable directly with this card. It is not likely to be

able to communicate. Please connect this card with the SWHUB.

300m LC

4-2 Installing the Card

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

5

Installing a driver

This chapter describes how to install the network driver of the LAN Card in the
Windows 2008 R2 environment. When the LAN expansion function is used, see
"Instructions for Setting the LAN Expansion Function" contained in the "
Drivers Kit ****-10-**" CD. (* is an arbitrary number).

The supported OS varies depending on the system unit to which the driver is
to be installed. Be sure to confirm the supported OS of the system unit to
which it is to be installed. For details about how to install drivers of optional
Cards including this LAN Card, see the software guide supplied with the
system unit.

 Windows 2008 R2 environment

Installing a driver

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

5-1

Windows 2008 R2 environment

When connecting the LAN cable to the network interface connector, the
drivers bundled in the Windows 2008 R2 cannot be used.

When CN7821-Y or CN7821-R LAN Card is added, be sure to apply the
driver in the "Drivers Kit ****-10-**" CD. (* is an arbitrary number). If
the driver is preinstalled as a factory expanded model, it is not
necessary to install.

Procedure for installing the driver for Windows 2008 R2

When using this LAN Card, install the network driver for the Windows 2008 R2.

It explains an automatic installation method by a driver.

1. Log in with the user name having the administration authority (such as
Administrator).

2. Click Hardware of Control Panel and then click Device Manager of

Devices and Printers. In the Device Manager window, double-click
Ethernet Controller under Other devices.

3. The Update Driver Software window opens. Click Browse my
computer for driver software.

On the Update Driver Software window, insert the "Drivers Kit ****­10-**" CD. (* is an arbitrary number). into the CD-ROM or DVD-RAM
drive and enter the directory shown below. Then click Next.

Table 5-1

OS LAN driver storage location

Windows 2008 R2 D:\WIN2008R2\DRIVERS\LAN\BROADXG_01\x64\setup.exe

5-2 Installing a driver

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

4. Broadcom NetXtreme II Driver Installer Wizard opens. Click Next.

5. Check I accept the terms in the license agreement and click Next.

6. Check Install

7. Check Finish

Installing a driver 5-3

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

8. Click Hardware of Control Panel and then click Device Manager of

Devices and Printers. In the Device Manager window, you can see
Broadcom BCM57810 NetXtremeII 10GigE(NDIS VBD Client) under
Network adapter.

9. Check the IP address. The initial value is obtained automatically. If the
fixed valuse is to be used, it is necessary to change the IP address setting.
After setting, check to connect the LAN cable to its destination such as a
hub and then restart the system unit.

When completed the driver set-up, the message This device cannot
start. (Code10) may appear. In this case, restart the system unit and
it will work properly. After rebooting, check Device Manager to work
the driver properly.

Restrictions to change parameters of the network adapter
After changing the network adapter setting, transmission may not be

made normally with the changed adapter. Check the changed network
adapter in the Device Manager window. If "!" is displayed, right-click the
adapter and disable it. Then enable the adapter again. The adapter
becomes available.

In an item of Speed & Duplex, please do not change setting of 1Gb
Full.

Click Control Panel, Network and Internet, Network and Sharing
Center, and Change adapter settings in this order. The IP address
can be changed by clicking the Properties button of Local Area

Connection and selecting a property of Internet Protocol Version *
(TCP/Ipv*). The location of the LAN Card can be checked by clicking

the Configure button.

When more than one LAN Card are mounted, set different network IDs
(the part masked by a subnet mask) for individual Cards. If the same
network ID is set for more than one LAN Card, the system unit may lack
of stability.

5-4 Installing a driver

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

6

Troubleshooting

This chapter describes how to address malfunctions of the LAN Card.

Troubleshooting

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

6-1

This chapter describes actions to be taken when the LAN Card does not
operate properly. If a problem remains after the following actions are taken,
contact your sales representative or call the maintenance personnel:

Table 6-1

No. Problem Verification & how to take action

The LAN Card is not recognized

1

properly.

LINK/ACT LED does not light even

2

though the network cable is
connected.

3 The OS is not bootable. • Check if the LAN Card operates normally.

• Check if the driver is installed correctly.

• Check if the LAN Card is inserted in the PCI slot
correctly.

Try removing and installing it again to see if the
problem is resolved.

• Check if the LAN Card is recognized correctly.

• Check if the driver is installed correctly.

• Check if the power is turned at the connected
device.

• Check if the length of the LAN cable exceeds the
limit.

• Check if the link to the connected device is
established.

Check that ACT/LNK LED or the LAN connector is
not pulled out and the corresponding pin is not
bent.

When the OS becomes unbootable after the LAN
Card is installed, try removing the Card and
booting the OS without the LAN Card.

6-2 Troubleshooting

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

7

Specifications

This chapter describes main specifications of the Card.

 Hardware specifications

Specifications

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

7-1

Hardware specifications

Table 7-1

No. Item Specification

Communication

1

functions

2 Power consumption 0.88 A at +12 VDC (Max 10.6 W)

Environmental

3

conditions

4 EMI FCC Class A

Supported
standards

Data transfer rate 10Gbps Full Duplex

No. of ports 2 ports for 10Gbps (LC)

Bus interface Compatible with PCI-Express2.0 (No. of lanes: x8)

Cable Multi Mode Fibre

Operating
temperature

Operating humidity

IEEE802.3ae 10GBASE-SR 10 Gigabit Ethernet

IEEE802.3x Flow Control

Core size: 50um,Cladding size:125um

Wave length:850nm,Bandwidth:2000MHz

0°C to 45°C

0% to 90% (non-condensing)

7-2 Specifications

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual

Hitachi Data Systems
Corporate Headquarters

2845 Lafayette Street
Santa Clara, California 95050-2639
U.S.A.

www.hds.com

Regional Contact Information
Americas

[phone]

[e-mail]

Europe, Middle East, and Africa
[phone]

[e-mail]

Asia Pacific
[phone]

[e-mail]

MK-90CRS011-01