Hitachi BD-60CE, BD-70CE, BD-80CE Instruction Manual

Instruction Manual

Washing Machine

Front Loading Content

Model

BD-60CE
BD-70CE
BD-80CE

Safety Instructions

Safety Instructions ........................

Installation

Product Description ......................

Installation .....................................

Operation

Quick Start .....................................

Before Each Washing ...................

Detergent Dispenser .....................

Control Panel .................................

Option .............................................

Other Function ...............................

Programs ........................................

Washing Program Table ................

Maintenances

2

7

8

12

13

14

15

16

17

18

19

Thank you for purchasing a
Hitachi front loading washing machine.

Please read this Instruction Manual
carefully for proper operation of the
machine.
Please keep this Instruction Manual for
future reference.

Cleaning And Care ........................

Troubleshooting ...........................

Technical Specifications ...............

Specification ..................................

21

24

25

26

Safety Instructions

Safety Instructions

For your safety, the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:

！

WARNING

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.

！

CAUTION

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the
environment.

NOTE

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries.

！

WARNING

The electric shock!

● If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

2

Safety Instructions

●

Do not dismantle, repair or modify the appliance.

This could cause malfunction, fire, electric shock or injury.

For repair, please contact your local service center.

● The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.

● Before any maintenance the device, unplug the
appliance from the mains.

● Always unplug the machine and turn off the water

supply after use.

● Do not pour water on the machine when it is running.

This could cause an electric shock.

● To ensure your safety, power plug must be inserted into

an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.

● Make sure that the water and electrical devices must

be connected by a qualified technician in accordance
with the manufacturer's instructions and local safety
regulations.

● Do not insert the plug with a wet hand.

● Use the rated mains voltage and do not connect another

plug at the same socket.

● Do not use a mains plug adaptor or an extension cable.

Risk to children!

● Children should be supervised to ensure that they do not
play with appliance.

● Animals and children may climb into the machine. Check
the machine before every operation.

● Kids should be supervised that they do not play with
the appliance.

3

Safety Instructions

● Glass door may be very hot during the operation. Keep

kids and pets far away from the machine during the
operation.

● Remove all packages and transport bolts before using

the appliance. Otherwise, serious damage may result.

● Plug must be accessible after installation.

Risk of explosion!

● Do not wash or dry articles that have been cleaned in, washed

in, soaked in, or dabbed with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) This may result in
fire or explosion.

● Beforehand thoroughly rinse items of washing by hand.

！

CAUTION

Installing the product!

● The installation of the appliance should be done by the

manufacturer’s dealer or service agent.

● This washing machine is for indoor use only.

● It isn't intended to be built-in using.

● The openings must not be obstructed by a carpet.

● Washing machine shall not be installed in bath room or

very wet rooms as well as in the rooms with explosive
or caustic gases.

● The washing machine with single inlet valve only can be

connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.

● Plug must be accessible after installation.

● If there is a water outage or you remove the water supply hose

and reattach it, turn off the tap and press the Start/Pause button,

then turn on the tap slowly after 40 seconds.
Air pressure could damage the washing machine if there is a lot
of air in the water pipe.

4

Safety Instructions

● Remove all packages and transport bolts before using

the appliance. Otherwise, serious damage may result.

Risk of damaging appliance!

● Your product is only for home use and is only designed

for the textiles suitable for machine washing.

● Do not climb up and sit on top cover of the machine.

● Do not lean against machine door.

● Do not put heavy objects on the washing machine.

● Cautions during Handling Machine:

1. Transport bolts shall be reinstalled to the machine by
a specialized person.

2. The accumulated water shall be drained out of the
machine.

3. Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Machine door can
not be used as the handle during the conveyance.

4. This appliance is heavy. Transport with care.

● Please do not close the door with excessive forces. If it

is found difficult to close the door, please check if the
clothes are put in or distributed well.

● It is forbidden to wash carpets.

Operating the appliance!

● Before washing the clothes at first time, the product

shall be operated in one round of the whole procedures
without the clothes inside.

● Flammable and explosive or toxic solvents are forbidden.

Gasoline and alcohol etc. shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.

5

Safety Instructions

● Do not wash waterproof items such as raincoats, wet suits,

ski suits, sleeping bags, cushions, pillows, shoes, etc.
The washing machine may not work properly, or the items
may cause injury or damage the machine.

● If detergent, fabric softener or bleach spills on the surface of

the machine, clean it up with a damp cloth immediately.
The plastic or steel parts of the washing machine may get
damaged.

● Do not place heat sources near the washing machine.

This may cause deformation of the machine.

● Make sure that all pockets are emptied. Sharp and rigid

items such as coin, brooch, nail, screw or stone etc. may
cause serious damages to this machine.

● Please check whether the water inside the drum has

been drained before opening its door. Please do not open
the door if there is any water visible.

● Be careful of burning when the product drains hot

washing water.

● Never refill the water by hand during washing.

● After the program is completed, please wait for two

minutes to open the door.

Packaging/Old appliance

This marking indicates that this product should not be
disposed with other household wastes throughout the

EU

. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use
the collection systems or contact the retailer where the
product was purchased. They return and can take this
product for environmental safe recycling.

6

Installation

Product Description

Water Supply Hose

Top Cover

Control Panel

Detergent Dispenser

Door

Power Supply Cord

Service Filter

Drain Hose

NOTE

The product line chart is for reference only, please refer to real product as

standard.

Accessories

Drum

Transport

Bolts

(4pcs.)

Supply Hose

(cold water)

Supply Hose

(hot water)

※Optional

Drain Hose Support

※Optional

7

Instruction Manual

Installation

Installation area

！

WARNING

●

Stability is important to prevent the product from

wandering!

●

Make sure that the product should not stand on

the power cord.

Before installing the machine, the location characterized
follows shall be selected:

1. Rigid, dry, and level surface

2. Avoid direct sunlight

3. Sufficient ventilation

4. Room temperature is above 0°C

5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

！

WARNING

●

Packaging material (e.g. Films, Styrofoam) can be

dangerous for children.

●

There is a risk of suffocation ! Keep all packaging

well away from children.

W 20mm>

w

w

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing.
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

Make sure the small triangle

Remove transport bolts

！

WARNING

You must remove the transport bolts from the backside before using the product.

●

You’ll need the transport bolts again if you move the product, so make sure keep

●

them in a safe place.

Please take the following steps to remove the bolts:

1. Loosen 4 bolts with spanner and then remove them.

2. Stop the holes with transport bolts.

3. Keep the transport bolts properly for future use.

8

Installation

Leveling the washing machine

！

WARNING

● The lock nuts on all four feet must be screwed tightly against the housing.

● Check the alignment of the washing machine with level, and adjust the feet if it’s aligned.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.

2. Loosen the lock nut turn the feet until it closely contacts with the floor.

3. Adjust the legs and lock them with a spanner, make sure the machine is steady.

1 2 3

Lock nut

foot

Raise

Connect Water Supply Hose

！

WARNING

● To prevent leakage or water damage, follow the instructions in this chapter.
Do not kink, crush, modify or sever water inlet hose.

●

●

For the model equips hot valve, connect it to hot water tap with hot water supply

hose. Energy consumption will decrease automatically for some program.

Connect the inlet pipe as indicated. There are two ways to connect the inlet pipe.

Connection between ordinary tap and inlet hose.

1

1

clamp nut

Loosen clamp nut and

four bolts

Tighten clamp nut

Lower

2

Slide Bushing

Press slide bushing,

insert inlet hose into
connecting base

3

Connection finished

4

4

Connection between screw tap and inlet hose.

2

Tap with threads and inlet hose

Slide Bushing

Special tap for washing machine

9

Installation

● Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.

● Optimum water pressure is 0.05~1.0MPa.

Water Inlet Valve

Water Supply Hose

Hose Connector

Drain Hose

！

WARNING

Do not kink or protract the drain hose.

●

Position drain hose properly, otherwise damage might result of water leakage.

●

There are two ways to place the end of drain hose:

1.Put it into the water trough.

Water
trough

2.Connect it to the branch drain pipe of
the trough.

100cm

Max.

Rubber Seal

Min.60cm

NOTE

If the machine has drain hose support, please install it like the following.

●

！

WARNING

●

When installing drain hose, fix it properly with a rope.

If drain hose is too long, do not force it into washing machine as it will cause

●

Trough

Max.100cm
Min.60cm

Hose Retainer

Bind

abnormal noises.

10

Min.60cm

Max.100cm

Installation

Checking operation

Checking after installation

Turn on the water tap and close the washing machine door.

1

Press the Power button to switch power on.

2

Select the cotton program and press the Start/Pause button.

3

After 5 minutes, check if there is no water leakage from anywhere.

4

Press the Power button to switch power off.

5

Press the Power button again to switch power on.

6

Select the Spin program and press the Start/Pause button.

7

Check if there is no abnormal vibration or sound, and that water is drained out properly.

8

If any of the following conditions or other abnormalities occur, immediately pull out

the power plug to prevent an accident and contact your local service center.

● The washing machine does not operate when you switch power on.

● The power cord has cracks.

● There are abnormal vibrations and sounds during operation.

● There is a smell of burning.

11

Operations

Quick Start

●

Before washing, please make sure it’s installed properly.

Before washing at first time, the washing machine shall be operated in one

●

of the whole procedures without clothes in as follows.

Before Washing

1

！

CAUTION

1

Plug in

● Detergent need to be added in “case
with this function.

Washing

2

Open tap

1

Select Programs

2 3 4 5

Load

Close door

Main
wash

Softener

Prewash

Add detergent

NOTE

I” after selecting pre-washing for machines

2

Select function or default

Start up

NOTE

3

After Washing

3

“End” on display.

● If default is selected,

step 2 can be skipped.

12

Operations

Before Each Washing

● The working condition of the washer should be 0-40°C. If used under 0°C, the

inlet valve and draining system may be damaged. If the machine is placed under

condition of 0°C or less, then it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose are not frozen

before use.

● Please check the labels and the explanation of using detergent before wash. Use

non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label

Put small clothes into the
pillow slip

● When washing a single clothes, it may easily cause great eccentricity and give
alarm due to great unbalance. Therefore it is suggested to add one or two

more clothes to be washed together so that spinning can be done smoothly.

● Don’t washing the clothes touching with kerosene, gasoline, alcohol and
other flammable materials.

● Washing the following items may cause injury or malfunction due to
abnormal vibration.

- Waterproof items such as a wet suit, ski suit, etc.

- Anti-slip treated items with rubber bottoms such a doormat.

- Cushions, pillows, shoes, etc.

- Do not put the fabric which can absorb the water very well (towel, jeans, etc.)
in the laundry net when washing.

Take out the items out of

the pockets

Turn easy-pilling and
long-pile fabric inside out

！

WARNING

Knot the long strips, zip or

button

Separate clothes with
different textures

13

Operations

Detergent Dispenser

Liquid detergent

Dam-board

Powder detergent

I

Pre wash detergent

II

Main wash detergent

Dam-board

！

CAUTION

● Detergent only need to be added in “case I” after selecting pre-washing

for machines with this function.

● Use the amount of detergent recommended on the detergent package.
The type and amount of detergent depends on the type of fabric, load size,

degree of soiling and hardness of the water used.
Use less detergent if : You wash a small load and the laundry is slightly soiled.

● Too much detergent can result in excess foam formation which reduces rinse
efficiency or may cause a water leak.

Softener

Programs

Cotton Eco

Cotton

Rapid 15

Daily 45

Daily 60

Rinse&Spin

Spin

Duvet

Means must ○　Means optional

-

-

Programs

Tub Clean

Wool

Delicate

Mix

Outdoor

Baby Care
Synthetic

NOTE

● As for the agglomerated or ropy detergent or additive, before they are poured into
the detergent box, it is suggested to use some water for dilution to prevent the inlet
of detergent box from being blocked and overflowing while filling water.

Please choose suitable type of detergent for the various washing temperature to

●
get the best washing performance with less water and energy consumption.

14

Operations

Control Panel

Model: BD-60CE /BD-70CE /BD-80CE

Display

5

The display shows the settings, estimated time

remaining, options, and status messages
for your washer. The display will remain on
through the cycle.

Programs

4

Available according
to the laundry type.

Option

3

This allows you to

select an additional
function and will
light when selected.

1

Power

Product is on/off.

2

Start Pause/

Press the button
to start or pause the
washing cycle.

NOTE

The chart is for reference only, please refer to real product as standard.

●

Display

A C

B

E D

15

A

Display

Wash Time (h:min)

Speed (r/m)

End Temp. (°C)

Child Lock

B

D

Reload

*For spin speed above 1,000 (r/m),
display shows first two digits.

Delay Time

Error

C

Door Clean

E

Door Lock

Operations

Option

Prewash

Extra Rinse

Timer

Stain
Level

Pre Wash:

The Prewash function can get an extra wash before main wash, it is suitable for washing the
dust rises to surface of the clothes; You need to put detergent into the Case (I) when select it.

Extra Rinse:

The laundry will undergo extra rinse once after you select it.

Timer:

1. Select a programme

2. Press the Timer button to choose the time (the delaying time is 0-24 H.);

3. Press[Start/Pause to commence the delay operation]

Cancel the Timer function

Press the [Timer] button and [Start/Pause] button until the display be 0h. It should be
pressed before starting the programme. If the programme already started, should switch
off programme to reset a new one.

Stain Level

The washing time will increase or decrease after you select it.

Press the Function button to choose

Press the Function button to choose

Set the Timer function

Timer

！

CAUTION

● If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is

restarted, the program will continue.

Programme

Timer

Cotton Eco

Cotton

Rapid 15

Daily 45

Daily 60

Rinse&Spin

Spin

Duvet

Means optional (Some models have intelligent weighing function, please refer to the actual product)○　

Option

Extra
rinse

Pre
wash

Programme

Tub Clean

Timer

Option

Extra
rinse

Wool

Delicate

Mix

Outdoor

Baby Care

Synthetic

16

Pre
wash

Operations

Other Function

Temp

Spin

Speed

Temp:

Spin Speed:

○　

Child Lock:

Press the Temp button to choose

Press the button to regulate the temperature (Cold, 20°C, 30°C, 40°C, 60°C, 90°C)

Press the button to change the speed.

1200: 0-400-600-800-1000-1200

Programme

Cotton Eco

Cotton
Rapid 15

Daily 45

Daily 60

Rinse&Spin

Spin

Duvet

Means optional

*For spin speed above 1,000 (r/m), display shows first two digits.

Choose
the Programme

● Press the two button 3 sec. also to be released the function.

● The “Child Lock” will lock all buttons except Power button.

● Cut off the power supply, the kid’s protection is to be released.

● The child lock will remain effective when the power is resumed for some models.

Press the Spin Speed button to choose

Default Speed(r/m)

1200

800

1200

800

800

1000

1000

1000

800

(Some models have intelligent weighing function, please refer to the actual product)

Programme

Tub Clean

Wool
Delicate

Mix

Outdoor
Baby Care

Synthetic

Default Speed(r/m)

1200

400

400

600

1000

800

1000

1200

To avoid misoperation by children.

Press

Start

！

CAUTION

Timer

Spin

Speed

[ ] [ ]

Delay and Speed

Memory

Door Clean

Re load

Mute the buzzer :

To act the buzzer function, press the button again for 3 seconds. The setting will be kept
until the next reset.

● After muting the buzzer function, the sounds will not be activated any more.

Memory:

After choosing the program and setting the options, press [Spin Speed] 3 sec. before

start to wash. The default setting course is Cotton Eco.

To memory the frequently used programs.

the Programme

Choose

！

Temp.

CAUTION

Press the Temp. button for 3sec.,
the buzzer is mute.

[ ]

Door Clean: The shower inlet to door glass before final spin process and before opration.

Reload:

You can add fabric when your press [Start/Pause] button for 3sec.

Before the water high level and the temperature up to

60°C.

17

Operations

Programs

Programs are available according to the laundry type.

Rapid 15

Daily 45

Daily 60

Outdoor

Baby Care

Rinse & Spin

Spin

Memory

Tub Clean

Cotton Eco

Cotton

Wool

Synthetic

Delicate

Duvet

Mix

Cotton

Synthetic

Baby

Care

Daily 45

Mix

Daily 60

Outdoor

Rapid 15

Wool

Spin

Cotton Eco

Hard-wearing textiles, heat-resistant textiles made of cotton or linen.

Wash synthetic articles, for example: shirts, coats, blending.

While washing the knitting textiles, detergent quantity shall be reduced due to its
loose string construction and easily forming bubbles.

Washing the baby’s clothes, it can make the baby’s wear cleaner and make the
rinse performance better to protect the baby skin.

Washing few and not very dirty clothes quickly.

Mixed load consisting of textiles made of cotton and synthetics.

It is suitable for washing few and not very dirty clothes quickly.

Specially for outdoor clothes.

Extra short program approx suitable for lightly soiled washing as a small amounts

,

of laundry.

Hand or machine - washable wool or rich wool textiles.
Especially gentle wash program to prevent shrinkage, longer program pauses

(textiles rest in wash liquor).

Extra spin with selectable spin speed.

To increase the washing effects, washing time is increased.

Tub Clean

Duvet

Delicate

Specially set in this machine to clean the drum and tube. It applys 90°C high
temperature sterilization to make the clothes washing more green. When this
programme is performed, the clothes or other washing cannot be added.
When proper amount of chlorine bleaching agent is put in, the barrel cleaning
effect will be better. The customer can use this programme regularly according
to the need.

This program is specially designed for washing duvet coats.

For delicate washable, e.g. made of silk, satin, synthetic fibres or blended fabrics.

18

Operations

Washing Programs Table

Model: BD-60CE /BD-70CE /BD-80CE

Programs

Cotton Eco

Cotton

Rapid 15

Daily 45

Daily 60

Rinse & Spin

Spin

Tub Clean

Wool

Delicate

Mix

Outdoor

Baby Care

Synthetic

Duvet

Load(kg) Default Time

6.0

6.0

6.0

2.0

2.0

6.0

-

2.0

2.5

6.0

3.0

7.0

7.0

7.0

2.0

2.0

7.06.0

7.0

-

2.0

2.5

7.06.0

7.0

7.06.0

3.5

2.52.5

8.0

8.0

8.0

2.0

2.0

2.02.02.0

8.0

8.0

-

2.0

2.5

8.0

8.0

8.0

4.0

2.5

Temp.

Default

30

40

Cold

30

Cold

-

-

90

40

30

40

40

30

40

40

(°C)

6.0 7.0 8.0

0:58

2:40

0:15

0:45

1:00

0:31

0:12

1:21

1:06

1:00

1:13

1:48

1:20

1:40

1:20

● The EU energy efficiency class is: A+++

.

Energy test program: Cotton Eco 60/40
Speed: the highest speed; Other as the default.

Half load for 6.0/7.0/8.0Kg machine: 3.0/3.5/4.0Kg.

● “Cotton Eco 60/40°C” is the standard washing programs to which the information in

the label and the fiche relates, and they are suitable to clean normally soiled cotton

laundry and that they are the most efficient programmes in terms of combined
energy and water consumptions for washing that type of cotton laundry, that the
actual water temperature may differ from the declared cycle temperature.

°C

NOTE

● The parameters in this table are only for user's reference. The actual parameters
maybe different with the parameters in above mentioned table.

19

Operations

Duvet program

NOTE

● Do not use blanket net. This may cause excessive vibration when spinning.

Load the laundry

1

1

Fold a large items such as a duvet or blanket as follows.

1

Load laundry into the drum with the ends facing the rear of the drum.

Laundry ends facing
rear of drum

Press the Power button to switch power on.

2

Select the Duvet program.

3

2

Drum

Push laundry inside
not to exceed this line

3

Add detergent into the detergent dispenser.

4

Press the Start /Pause button.

5

20

Maintenances

Cleaning And Care

！

WARNING

● Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet

1

Proper maintenance on the washing machine can extend its

working life. The surface can be cleaned with diluted

non-abrasive neutral detergents when necessary. If there is

any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.

NOTE

●

Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products, etc.

Cleaning The Drum

2

The rusts left inside the drum by the metal articles shall be removed immediately

with chlorine-free detergents.

Never use steel wool.

●

Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products, etc.

Cleaning The Door Seal And Glass

3

Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up, it
can cause leaks.

Remove any coins, buttons and other objects
from the seal after each wash.

！

●

Do not apply too much force during door below cleaning because it may cause
of door bellow take out and the water leakage problem.

NOTE

CAUTION

21

Maintenances

Cleaning And Care

Cleaning The Inlet Filter

4

● Inlet filter must be cleaned if there is less water.

Washing the filter in the tap

1.Close the tap.

2.Remove the water supply hose from the tap.

3.Clean the filter.

4.Reconnect the water supply hose.

Washing the filter in washing machine:

1.Screw off the inlet pipe from the backside
of the machine.

2.Pull out the filter with long nose pliers

and reinstall it back after being washed.

3.Use the brush to clean the filter.

4.Reconnect the inlet pipe.

NOTE

Filter

● If the brush is not clean, you can pull out the filter washed separately;

● Reconnect, turn on the tap.

Cleaning The Detergent Dispenser

5

1.Press down the arrow location on softener cover inside the dispenser drawer.

2.Lift the clip up and take out softener cover and wash all grooves with water.

3.Restore the softener cover and push the drawer into position.

A

Pull out the dispenser

drawer with press the A

Do not use alcohol, solvents or chemical products to clean the machine.

●

Softener

1 2 3 4

cover

Clean the dispenser
drawer under water

NOTE

NOTE

22

Clean inside the recess

with an old toothbrush

Insert the dispenser

drawer

Maintenances

Cleaning And Care

Cleaning The Drain Filter

6

●

Be careful of the hot water!
Allow detergent solution to cool down.

●

● Unplug the machine to avoid electrical shock before washing.

● Drain pump filter can filter the yarns and small foreign matters from the washing.

● Clean the filter periodically to ensure the normal operation of washing machine.

● Do not open the drain filter when a program is running.

● Do not operate the washing machine without the drain filter.

！

WARNING

2

Select the Spin program and start to drain

●

remaining water in the drum.

Make sure to drain the water first with Drain

●

program, otherwise a lot of hot water may come
out.

1

Open the lower cover cap

3 4 5

Open the filter by turning

to the counter clockwise

● Make sure that valve cap and emergency drain hose are reinstalled properly, cap

plates should be inserted aligning to hole plates otherwise water may leak.

● Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.

Rotate lower cover cap directly to make water run into basin.

● When the appliance is in use and depending on the programme selected there can

be hot water in the pump Never remove the pump cover during a wash cycle always . ,
, . wait until the appliance has finished the cycle and is empty When replacing the

cover ensure it is securely re-tightened, .

Remove extraneous matter

！

CAUTION

Close the lower cover cap

23

Maintenances

Troubleshooting

The start of the appliance does not work or it stops during operation.

First try to find a solution to the problem, if not, contact the service centre.

Description

Washing machine
cannot start up

Door can’t be
opened

Water leakage

Detergent residues
in the box

Indicator or display
does not light

Abnormal noise

Error Codes

Description

Reason

Door is not closed properly

Washer's safety protection
design is working

The connection between inlet

pipe or outlet hose is not tight

Detergent is dampened
or agglomerated

Disconnect the power
PC board or harness has
connection problem

Reason

Door is not closed properly

Water injecting
problem while
washing

Overtime water draining

Solution

Restart after the door is closed
Check if the clothes is stuck

Disconnect the power, restart
the product

Check and fasten water pipes
Clean up outlet hose

Clean and wipe the detergent
box

Check if the power is shut
down and the power plug is
connected correctly

Check if the fixing (bolts) have
been removed
Check it’s installed on a solid
and level floor

Solution

Restart after the door is closed
Check if the clothes is stuck
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is blocked

Check if the drain hose is blocked

Water overflow
This is caused by a faulty device sensor.

Others

Restart the washer

Please try again first, call up
service line if there are still
troubles

NOTE

After the check activate the appliance If the problem occurs or the display , .

●

shows other alarm codes again, contact the service centre.

24

Maintenances

Technical Specifications

Power Supply

MAX.Current

Standard Water Pressure

Model

BD-60CE

BD-70CE

BD-80CE

220-240V, 50Hz

10A

0.05MPa~1MPa

Washing Capacity

6.0kg

7.0kg

8.0kg

Dimension
(W*D*Hmm)

595*470*850

595*495*850

595*565*850

W

Net Weight

54kg

61kg

68kg

H

D

Rated Power

2100W

2000W

2000W

25

Maintenances

Specifications

Model

Capacity

Spin Speed

Energy efficiency class

Annual energy consumption

Power consumption of off - mode

Power consumption of Left on -mode

Annual water consumption

Spin- drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°C at full load

Energy consumption of the standard 60°C at partial load

Energy consumption of the standard 40°C at partial load

Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load

Programme duration of standard 40°C at partial load

Water consumption of the standard 60°C at full load

Water consumption of the standard 60°C at partial load

Water consumption of the standard 40°C at partial load

Remaining moisture content of the standard 60°C at full load

Remaining moisture content of the standard 60°C at partial load

Remaining moisture content of the standard 40°C at partial load

Noise level of washing

Noise level of spinning

0.80/0.8/0.77 kwh /cycle

0.59/0.59/0.62 kwh /cycle

0.57/0.57/0.58 kwh /cycle

BD-60CE

153 kWh /annual

9240L /annual

Cotton Eco

230/230/240min

223/223/230min

48L /cycle

37L /cycle

37L /cycle

6kg

1200 rpm

A +++

0.5W

1.0W

B

220min

50%

55%

55%

59dB (A)

76dB (A)

26

Maintenances

Specifications

Model

Capacity

Spin Speed

10000/10000/10000/10000/9900L /annual

0.90/0.90/0.90/0.90/0.91 kwh /cycle

0.72/0.72/0.72/0.72/0.71 kwh /cycle

Energy efficiency class

Annual energy consumption

Power consumption of off - mode

Power consumption of Left on -mode

Annual water consumption

Spin- drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°C at full load

Energy consumption of the standard 60°C at partial load

Energy consumption of the standard 40°C at partial load

Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load

Programme duration of standard 40°C at partial load

Water consumption of the standard 60°C at full load

Water consumption of the standard 60°C at partial load

Water consumption of the standard 40°C at partial load

Remaining moisture content of the standard 60°C at full load

235/235/235/235/230min

225/225/225/225/215min

223/223/223/223/210min

42/42/42/42/41L /cycle

42/42/42/42/41L /cycle

BD-70CE

174 kWh /annual

Cotton Eco

0.62 kwh /cycle

50L /cycle

7kg

1200rpm

A +++

0.5W

1.0W

B

50%

Remaining moisture content of the standard 60°C at partial load

Remaining moisture content of the standard 40°C at partial load

Noise level of washing

Noise level of spinning

27

55%

55%

59dB (A)

78dB (A)

Maintenances

Specifications

Model

Capacity

Spin Speed

Energy efficiency class

Annual energy consumption

Power consumption of off - mode

Power consumption of Left on -mode

Annual water consumption

Spin- drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°C at full load

Energy consumption of the standard 60°C at partial load

Energy consumption of the standard 40°C at partial load

Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load

Programme duration of standard 40°C at partial load

Water consumption of the standard 60°C at full load

Water consumption of the standard 60°C at partial load

Water consumption of the standard 40°C at partial load

Remaining moisture content of the standard 60°C at full load

0.93/0.93/0.93/0.93/0.90 kwh /cycle

0.84/0.84/0.84/0.84/0.88 kwh /cycle

239/239/239/239/230 min

228/228/228/228/220 min

225/225/225/225/210 min

45/45/45/45/47L /cycle

45/45/45/45/47L /cycle

BD-80CE

8kg

1200 rpm

A +++

196 kWh /annual

0.5W

1.0W

11000L /annual

Cotton Eco

0.81 kwh /cycle

54L /cycle

50%

B

Remaining moisture content of the standard 60°C at partial load

Remaining moisture content of the standard 40°C at partial load

Noise level of washing

Noise level of spinning

28

55%

55%

59dB (A)

78dB (A)

Memo

29

PART NO.