Hitachi 37LD9700C, 32LD9600, 32LD9700N, 37LD9600, 32LD9700C User Manual

...

Download

Page 1

Colour LCD Television

Digital Tuner Models

32LD9700U

32LD9700C

32LD9700N

37LD9700U

37LD9700C

37LD9700N

Non Digital Tuner Models

32LD9600

37LD9600

USER'S MANUAL

MANUEL UTILISATEUR

BEDIENUNGSANLEITUNG

MANUAL DEL USUARIO

MANUALE D'USO

BRUKSANVISNING

BRUKERHÅNDBOK

BRUGERVEJLEDNING

KÄYTTÖOPAS

ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ

GEBRUIKSAANWIJZING

READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER’S MANUAL FOR FUTURE REFERENCE

For future reference, record the serial number of your television. SERIAL NO.

This serial number is located on the rear of the television.

Ver. 1

This is the image of the model 32LD9700U.

Page 2

USER'S MANUAL

ENGLISH

Thank you for purchasing the HITACHI LCD Television. Please read this user’s manual carefully before operating this product. To ensure proper operation, please read and follow ALL the instructions, especially the “IMPORTANT SAFETY INSTRUCTIONS” and “SAFETY PRECAUTIONS”. Please keep this user’s manual for future reference.

Ver. 1

Page 3

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .........2

INTRODUCTION ...........................................3

About This Manual ................................................ 3

Trademark Credits .................................................3

About Software ...................................................... 3

Infomation for Users Applicable in

European Union Countries .............3

SAFETY PRECAUTIONS ...............................4

Important for United Kingdom ...............................4

About the Symbols ................................................4

Cleaning and Maintenance ....................................7

ABOUT LCD PANEL ......................................8

Common Phenomena of LCD Panel ..................... 8

FEATURES ....................................................9

SUPPLIED ACCESSORIES ............................9

COMPONENT NAMES .................................10

Main Unit .............................................................10

Remote Control ................................................... 11

PREPARATION ............................................12

Remote Control Batteries Installation .................. 12

Handling the Remote Contorl .............................. 12

Caution When Moving the Main Unit ................... 12

Safety Precaution on Main Unit Installation .........13

Anti-Tumble Measures ........................................13

CONNECTION ............................................14

Terminal Positions ...............................................14

Connecting Procedure .........................................14

BASIC OPERATION .....................................20

Power On/Off .......................................................20

Easy Preset ......................................................... 21

Volume UP/DOWN .............................................. 22

Mute ....................................................................22

Input Switching to TV/AV1~5,HDMI, and RGB .... 23

Input Signal Screen Display ................................23

TV SETUP OPERATION ..............................24

How to use the On-Screen Display

(OSD) system ...........24

Language Menu ..................................................24

Setup Menu (TV mode) ....................................... 25

Setup Menu (AV mode) .......................................27

Setup Menu (RGB mode) .................................... 28

Function Menu .....................................................30

Picture Menu (TV/AV mode) ................................ 32

Picture Menu (RGB mode) .................................. 35

Audio Menu .........................................................37

Timer Menu .........................................................38

Analogue Teletext ................................................39

DIGITAL TERRESTRIAL TELEVISION

(DTT) OPERATION* .......40

* The section “DIGITAL TERRESTRIAL TELEVISION

(DTT) OPERATION” is only for 9700 models.

How to use the On-Screen Display

(OSD) system ......................................................40

Changing Preset ..................................................41

Channel Selections .............................................42

Channel Sort .......................................................43

Channel Editing ................................................... 43

Utilizing the Information Tool ...............................44

Timer Programming .............................................46

Conﬁ guring the Setting ........................................ 47

Common Interface ............................................... 50

TV Setup Menu ...................................................50

FUNCTION ..................................................51

Power Swivel ....................................................... 51

Size Switching ..................................................... 52

Multi Picture Mode ...............................................56

Picture Freezing ..................................................60

Photo Input Function ...........................................61

Audio Switching ................................................... 67

Power Save Mode ............................................... 68

DVD Player / STB Selection ................................ 69

TROUBLESHOOTING ..................................70

When Following Messages Appear

on the Screen ...................................................... 70

Symptom and Check List ....................................70

PRODUCT SPECIFICATIONS ......................73

Signal Input .........................................................74

Recommended Signal List ..................................75

IMPORTANT SAFETY INSTRUCTIONS

Read this instruction thoroughly. Retain this instruction for future reference. Heed all warnings and cautions to prevent possible danger. Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may

shorten its service time. Do not block any ventilation openings. Install the product in accordance with the manufacture’s instructions. Before calling for the technical support or service technician, read “TROUBLESHOOTING” (70 ~ 72) to determine

the symptoms when problems occur during installation or operation of the product. If serious problems happen (such as smoke or an abnormal odour from the unit), turn off the Main Power, unplug

the Power Cord, and then, contact your local dealer immediately.

Page 4

INTRODUCTION

Thank you for purchasing the HITACHI LCD Television. We hope that you will enjoy the great performance with this product. This LCD Television has been designed to meet the international standards. However, it could cause personal injuries and property damage if improperly handled. In order to prevent potential danger and obtain maximum beneﬁ t from your set, please observe the following instructions when installing, operating, and cleaning the product. Keep this manual for future reference, and record the serial number of your set in the space provided on the front cover page of this manual.

About This Manual

The information in this manual is subject to change without notice. This manual has been created with extra care. In case that you have any comments or questions regarding this

manual, please contact your local dealer or our Customer Service Centre.

Before operating this set, please fully understand the prerequisite such as speciﬁ cations or constraints of the

hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of misuse.

Reproduction, copying, use, modiﬁ cation, and/or transmission in whole or in part of this manual are prohibited

without any prior written permission.

All other products and company names used in this manual are trademarks or registered trademarks of their

respective owners.

ENGLISH

Trademark Credits

VGA and XGA are trademarks of International Business Machines Corporation. APPLE and Macintosh are registered trademarks of Apple Computer Inc. VESA is a registered trademark of the Video Electronics Standard Association. Licensed by BBE Sound, Inc. under USP5510752 and 5736897.

BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Manufactured under license from BBE Sound, Inc.

WOW, SRS and (z) symbol are trademarks of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc. SD Logo is a trademark. HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC. DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with European

Digital Broadcasting. FREEVIEW and the FREEVIEW logo are trade marks of DTV Services Ltd and are used under license. FREEVIEW

Logo © DTV Services Ltd 2002. This logo indicates that the product is set up to view digital terrestrial TV. The Digital logo is a Certiﬁ cation Mark. This logo indicates that the product will work after implementation of full

digital switchover. The "HD ready" logo is a trademark of EICTA.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

About Software

You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this product, which are prohibited by law.

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the local authority or the dealer where you purchased the product.

Page 5

SAFETY PRECAUTIONS

For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or damage to your property or this product.

Impor tant For United Kingdom

IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS

The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer. DO NOT cut off the mains plug from this equipment. If the plug ﬁ tted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualiﬁ ed electrician. If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having ﬁ rst removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.

WARNING: THIS EQUIPMENT MUST BE EARTHED IMPORTANT

The wires in the mains lead are coloured in accordance with the following code : Green and Yellow = Earth, Blue = Neutral, Brown = Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured GREEN or GREEN and YELLOW. The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

Green & Yellow to Earth

Brown to Live

Fuse

Cord Clamp

Blue to Neutral

About the Symbols

The following are the symbols used in this manual and afﬁ xed on the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section.

WARNING CAUTION

The triangle with illustration is intended to alert the users that there are possibilities of ﬁ re, explosion, or high temperature if the product is handled improperly. Each illustration within the triangle speciﬁ es the contents in detail. (The ﬁ gure on the left is an example.)

Never ignore the instruction. There are risks of serious injuries or possible death to the user.

Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.

Other Symbols

The circle with diagonal line and illustration indicates a prohibited action (the symbol to the left indicates that disassembly is prohibited.)

This symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet).

WARNING

There is a risk of ﬁ re, electric shock, or serious injury.

■

Unplug the power cord immediately when serious problems occur.

Serious problems such as

Smoke, abnormal odor or noise is emitted from the product. No picture, no sound or distorted picture on the display.

Foreign objects (such as water, metals etc.) get inside the unit. Do not continue using the product under these abnormal conditions. Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.

For your safety, never try to repair the product by yourself.

Disconnect the

plug from the power outlet.

Page 6

SAFETY PRECAUTIONS (continued)

WARNING

There is a risk of ﬁ re, electric shock, or serious injury.

■

Do not insert liquids or any foreign objects (such as metals or ﬂ ammable items) inside the unit.

In case it happens, turn off the main power, unplug the Power Cord, and contact your dealer immediately. Use special caution when younger children are around the unit.

■

Do not remove cover, or modify the product.

High-voltage components are installed inside of the unit. Removing covers can expose you to high

voltage, electrical shock, and other dangerous conditions.

Contact your local dealer to perform servicing such as inspection, adjustment, or repair work.

■

Install the unit in a sensible place where it does not expose anyone to danger or injury.

Impact with the edge of the unit could cause injury.

■

Do not place any objects on top of the unit.

Objects such as

Liquid containers (vase, ﬁ sh tank, ﬂ owerpot, cosmetics or liquid medicine). If water or any liquid spill onto the unit, it may cause short-circuit and result in ﬁ re or electrical shock. In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately. Do not place anything heavy on top of the unit. Do not climb on or hang from the unit. Do not let your pets get on top of the unit

■

Do not expose this unit to rain or moisture.

Never use this unit in the bathroom or shower room. Beware when you use this product outside, especially in rainy, or snowy weather, and at the beach or

waterfront.

When the product gets wet, it could cause ﬁ re or electrical shock.

ENGLISH

Do not

disassemble

■

Unplug this unit during lightning storm.

To reduce the risk of electrical shock, do not touch the product when starts lightning.

■

Do not do anything that may damage the Power Cord.

Do not damage, modify, twist, forcibly bend, heat, or pull excessively the Power Cord. Do not place heavy objects (including the unit itself) on top of the Power Cord. If the Power Cord is damaged, contact your dealer for repairs or exchange.

■

Use only with designated power supply voltage.

To prevent the risk of ﬁ re and electrical shock, operate this product only with the power supply voltage indicated on the

unit.

■

Beware not to drop or have any impact on the unit.

Take extra care while moving the unit. There is no protection glass on the surface of the LCD panel. Thus, do not press the panel surface with your ﬁ ngers or

hands. Or do not hit anything against the unit. These actions would damage the LCD cells or the panel surface and could cause the failure or personal injuries.

In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the Power Cord and contact

your local dealer immediately.

Continuing use of the product with above conditions would cause ﬁ re or electrical shock.

■

Clean dust or metals on or around the blade of the power plug regulary.

Continuing use of the product with above condition may cause ﬁ re or electrical shock. Always unplug the Power Cord ﬁ rst, and clean the blades with a dry cloth.

Disconnect the

plug from the power outlet.

Page 7

SAFETY PRECAUTIONS (continued)

CAUTION

■

Do not place the unit on an unstable surface.

Unstable places such as

Tilted surface or shaky rack, table, stand or trolly.

If the unit falls down, it could cause personal injury.

■

Do not place the unit at a dusty place.

It could cause malfunction.

■

Do not cover or block any ventilation holes on the product.

The unit would overheat, and it could cause ﬁ re or damage the product which may shorten its service life.

Install the product in accordance with the instructions in this manual.

Do not place the unit with ventilation side down.

Do not install the unit on the carpet or bedclothes.

Do not cover the unit with table cloth etc.

■

Be sure to ground the earth cable correctly.

Especially when you use Power Cord adapter, be sure to connect the earth cable to the ground terminal. Incorrect

connection would cause ﬁ re or electrical shock.

For your safety, always make sure to unplug the Power Cord before connect or disconnect the earth cable .

Supply connect

the ground wire.

■

Follow the Anti-tumble measures in this manual.

If the unit tumbles over, there is a risk of personal injury and possible death. Also, it would damage the product

seriously.

■

Do not install this product near the medical devices.

To prevent malfunction of the medical devices, do not use this product and medical devices in the same room.

■

Do not place the CRT-based television near the speakers of the LCD television.

It could cause the partial discoloration or blurring of the image on a CRT-based television.

Please install it away from the speakers of the unit.

■

Disconnect all of the external connection cables and detach the anti-tumble measures before

moving the unit.

It may cause ﬁ re, electrical shock, or personal injuries.

■

Connect the power plug securely.

Improper connection will cause overheating and may result in ﬁ re.

Do not touch the blades of the plug while connecting it to the wall socket. It could cause electrical shock.

If the plug is not ﬁ tted for the wall socket, contcat your dealer for replacement.

■

Do not handle the Power Cord with wet hands.

It could result in electrical shock.

■

Do not pull the cord when you unplug the Power Cord.

It may damage the cord and could result in ﬁ re or electrical shock.

Hold the plug when disconnecting it.

■

Unplug the Power Cord when you do not intend to use the product for long periods of time.

■

Handle the batteries properly.

Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause ﬁ re, personal

injury or damage to property. Use only the types of the batteries which are indicated in this manual. Do not insatall new batteries with used ones. Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment. Do not despose of the used batteries as domestic waste. Dispose of them in accordance with the local regulations.

Page 8

SAFETY PRECAUTIONS (continued)

PRECAUTIONS

■

Do not install areas where it will be subjected to high temperatures.

It could damage the cabinet or parts of the product.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.

■

Viewing Advice

The lighting of the environment in which the product is used should be appropriate. Too bright or dark environments are not good for

your eyes. Take time to relax your eyes occasionally. When you use this product, view from a distance equal to 3 to 7 times the height of the screen. This is the best viewing distance in

order to protect your eyes against eyestrain. Adjust the volume to an appropriate level, especially during the night.

■

When transporting this product:

When the product needs to be transported due to moving or repair, use the carton box and buffer material that came with this

product. Do not transport this product on its side. It could damage the panel glass or degrade the phosphors

of the panel.

■

Keep radio away from this unit whilst in use.

This unit is designed to meet the international EMI standards due to prevent radio interference. However, the unit may generate noise in the radio.

If the noise is heard on radio, please try the following actions.

Adjust the direction of the radio antenna in order not to receive the interference from the unit. Keep the radio away from the unit. Use coaxial cable for the antenna.

■

About infrared communication devices:

The infrared communication devices such as cordless microphones or cordless headphones may not operate properly around the unit.

It is because of communication failure. Please note that this is not malfunction.

■

When you dispose of this product at the end of its life, follow the regulations in your residential area.

For more information, contact the local authority or the dealer where you purchased the product.

ENGLISH

Cleaning and Maintenance

Please make sure to unplug the power cord before cleaning the unit.

■

How to clean the LCD panel of the unit.

Wipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface. Do not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage the panel surface. Do not wipe with a hard cloth or rub hard. It may hurt the panel surface. In case of the greasy dirt such as ﬁ ngerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and then

wipe with a soft and dry cloth. Do not use a spray cleaner. It could cause malfunction.

■

How to clean the cabinet of the unit.

The following may cause crack, deformation, and paint peeling.

Do not wipe the cabinet with benzene, thinner, and other chemical products. Do not spray volatile solutions such as insecticide over the cabinet.

Do not leave the cabinet in prolonged contact with plastic or rubber materials. Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation. Use a lint-free cloth to clean the cabinet and control panel of the monitor. In case of the heavy dirt, wipe with a soft cloth moistened

by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.

Never use the following detergents. It could cause crack, discoloration, and scratch.

Acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.

Page 9

ABOUT LCD PANEL

Common Phenomena of LCD Panel

The following are the common phenomena when operating LCD Panel due to its structural reason. Please note that they are not malfunctions.

Defective Spots on Panel

The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not emitted, brighter than the others, or in different colours, etc.

Surface on Panel

The LCD panel displays images by blinking the ﬂ uorescent lamps internally. This could raise the temperature of the display surface. In addition, do not impact strongly on the surface of the panel because LCD panel is made with ﬁ ne processing glass.

Residual image

When a still image or menu is displayed on the screen for a short time (about a minute) and then switches to another image, it may leave an “after-image” on the screen. The residual image will disappear on its own.

The Usage under the Low Temperature Environment

Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes slower when the ambient temperature around the monitor becomes too low. In some cases, it may cause the residual image. The residual image will disappear on its own as the temperature goes up and back to normal.

Page 10

FEATURES

Enjoy not only beautiful and high-quality pictures on the display, but also various kinds of useful and convenient functions in your daily life!

Large-screen and high-deﬁ nition LCD panel. Improved Digital signal processor. High quality sound with deeper, richer and dynamic bass tones. 9700 models have various functions as Digital Terrestrial Television (More TV channels, EPG, etc). 3 Scart terminals installed. Accept more digital input devices with 2 HDMI terminals. Great diversity of connecting terminals to cover wide range of audio-visual equipments. Enjoy the image from PC with large, high-deﬁ nition LCD screen. New Photo Input function with selectable Background Music. SD Card Slot installed. Easy-to-use On-Screen Display system operating with Remote control. Low power consumption with Power Saving feature. Motorized Power Swivel feature. Provided 1200 pages for Teletext.

SUPPLIED ACCESSORIES

ENGLISH

Check the supplied accessories before installation. In case of missing or damaged, please contact the dealer immediately.

User’s Manual Remote Control AA size batteries

Power Cord

UK only

* The type of power plug provided is different depending on the model

Except UK

Page 11

COMPONENT NAMES

Main Unit

Front Panel

Rear Panel

Cabinet Panel Indicating Lamp Remote Control Receiver Speaker Main Power Switch (on the bottom surface) Desktop Stand

32” models 37” models

Control Panel (including Card Slot)

SD MEMORY

CARD

PUSH-EJECT

Handgrips Side Input Terminal Board (External Device

Connection) Power Cord Socket Control Panel (see below for details)

Please refer to 14~19 for the detailed information for the connections.

SD Memory Card Slot Sub Power button Channel UP/▲button Channel DOWN/▼button Volume UP /►button Volume DOWN /◄button Input Select /OK button Menu / Return button

PH35814

Page 12

COMPONENT NAMES (Continued)

Remote Control

Sub Power Function Select (TV/DVD/SAT)

Press this button to select function mode

indicating LED lamp. Normally, select “

Input Select/DVD Control/Photo Input Control

Press this button to change input mode. In addition, you can use these buttons while

operating the selected brand of DVD player or Photo Input function. (DTT input: 9700 models

only) Menu Cursor OK Sound Mode

Sound mode can be changed each time pressed

in the following sequence. Movie→Music→

Speech→Favourite CHI/II

This is exclusively for TV audio A2/NICAM mode. Volume Up/Down Programme Select

Press these buttons to select a TV program

directly.

Freeze/Multi Mode [Hold]

Press this button to change the picture to freeze

mode. Press it again to return to normal picture.

In addition, during multi-picture mode, each time

press this button, the picture is changed to 2, 4, and 12 multi mode. (Also, it holds the page in

text mode.) [Colour (Red, Green, Yellow, Blue)] [Index] Time [Cancel]

Pressing this button can indicate the time by On-

Screen display when receiving a TV programme

on the screen. TV/Text [TVÙText]

This switches between the TV mode and the

Teletext mode. Zoom [TextÙTV+Text]

Press this button to change picture size.

Recall

Pressing this button shows the input signal

status. Return

You can use this to return to the previous menu. Picture Mode

Picture mode can be changed each time pressed

in the following sequence. Dynamic→Natural→

Cinema Channel Up/Down Mute Multi Picture

Press this button to change the picture to multi-

picture mode. Press it again to return to normal

picture. Photo Input (Photo/Rotate/Slide Show)

These buttons are to display and control the

pictures from digital still camera or USB card

reader. Swivel (with Desktop Stand)

This function is to rotate TV. Select the degree

of rotation with cursor key.

NOTE

Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from the use of TV mode. Those buttons are indicated by [ ]. Refer to "Analogue Teletext" on 39.

TV”.

ENGLISH

Page 13

PREPARATION

Remote Control Batteries I nstalla tion Handling the Remote Control

This remote control operates on 2 “AA” batteries.

1. Open the battery compartment cover

Slide open the battery

compartment cover on the backside of the remote control in the direction of an arrow.

2. Install the batteries

Install 2 “AA” batteries (included) making

sure the polarities match the indication inside the compartment.

3. Close t he batte ry com partment co ver .

To close the battery compartment

cover, slide the cover in the direction of an arrow till it clicks shut.

Use the remote control within about 5m from front of the unit’s remote-control sensor and within 30 degrees on both sides.

Within 30

Within 30 degrees

About 3m

degrees

About 3m

About 5m

CAUTION

It could cause corrosion or battery leakage and may result in physical injury and/or property damage including ﬁ re.

Never mix used and new batteries in the device. Replace all the batteries in a device at the same time. Remove the batteries if the remote control is not going to be used for an extended period of time.

To avoid possible failure, read the following instructions and handle the remote control properly.

Do not drop or cause impact to the remote control. Do not spill water or any liquid on the remote control. Do not place the remote control on a wet object. Do not place the remote control under the direct sunlight or near sources of excessive heat.

Caution When Moving the Main Unit

As this product is heavy, whenever it is moved, two people are required to transport it safely. When transferring the unit, hold the unit by using the handgrips at the backside of the panel. (See the ﬁ gures below for details.)

32” models: 37” models:

Handgrips

Page 14

PREPARATION (continued)

Safety Precaution on Main Unit Installation

Read SAFETY PRECAUTIONS (

) carefully besides this page.

*The Desktop Stand has been used for the illustration in this manual.

When installing the main unit, be sure to use the speciﬁ ed mount units in order to obtain maximum performance and maintain the safety. We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or improper installation.

As for the installation instruction, please read each user’s manual of the mount units: for Desktop Setup, Wall Mounting, and Ceiling Mounting. In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the speciﬁ ed installation specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages.

Please leave the adequate space around this unit in order to avoid increasing the internal temperature and keep safety while using swivel function. Make sure not to block any ventilation holes.

10cm or more

30cm

or more

10cm or more

Cord

chain

10cm or more*

Do not install the unit in the small space such as inside the rack, closet or the box.

Clamp

Leave more than 10cm of clearance from each side of unit and 30cm from the top of unit to wall.

Without Swivel function: Leave at least 10cm of clearance behind rear unit. With Swivel function: Leave the adequate space to obtain the maximum performance of Swivel Function. (32" models: 25cm , 37" models: 29cm) Refer to

for Swivel Function.

ENGLISH

Anti-Tumble Measures

Install in a stable place and implement safety measure against overturning.

Securing on desktop

Using commercially available wood screws, secure the set ﬁ rmly in position by fastening them to the screw holes at the rear of the stand as shown in the diagram.

Wood screw

Two places

Securing to ceiling

Using a commercially available cord, chain, and clamp, secure the set to a ceiling.

NOTE

For more information regarding the mounting of the unit, please contact your dealer. Loosen a cord or chain enough while operating power swivel to avoid physical injury. Please install the unit in a sensible location where it does not expose anyone to the danger of knocking into the

unit, causing injury to themselves or the LCD TV.

Securing to a wall or pillar

Using a commercially available cord, chain, and clamp, secure the set to a wall or pillar.

Cord or chain

Wall or pillar

Screw

Hook

Clamp

Page 15

CONNECTION

SD MEMORY

CARD

PUSH-EJECT

PH35814

INPUT(AV5)

L/MONO

AUDIO

VIDEO S-VIDEO

PH35826

Licensed by BBE Sound, Inc. under one or more of the following US patents : 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

WOW, SRS and symbol are trademarks of SRS Labs, Inc.

SERVICE USE ONLY

INPUT(RGB)

ANALOG RGB

INPUT(HDMI)

AUDIO

A C

INPUT (AV1)

INPUT (AV2)

INPUT (AV3)

INPUT (AV4)

ANT

OUTPUT

AUDIO

VIDEO

SUB WOOFER

POWER SWIVEL

HDMI2

HDMI1

L C

R PB

MONO

Y/VIDEO

AUDIO

C.1 C.2

COMMON

INTERFACE

Terminal Positions

Rear

Power Cord Socket Aerial Socket AV1 AV2 AV3 AV4 Monitor Out and Sub Woofer Service use only

Power Swivel Terminal (See 51)

PC Connection terminals

(D-sub 15 pin and mini stereo for

Audio) HDMI1, 2 and mini stereo for Audio Common Interface slot

*9700 models only

Side

AV5 Headphone terminal Photo Input terminal SD Memory Card slot

Connecting Procedure

This unit is ready for various kinds of connections. Make a connection in the following steps. Be sure to turn off the Main Power ﬁ rst when connecting external equipments.

1. Connect Power Cord to the rear panel.

2. Connect Aerial Lead.

3. Connect your external equipments to the unit if any.

4. Connect the Power Plug to the Wall Socket.

1. Connecting Power Cord to the Rear Panel

Connect Power Cord to the unit. *Make sure not to connect the Power Plug to the Wall Socket until all connections are completed.

2. Connecting Aerial Lead.

There are two ways to connect Aerial Lead.

When you do not have any other external equipment:

Connect the Aerial Lead directly into the Socket at rear panel.

When you have one or more external devices to connect:

1. Use RF cable to connect between each equipment and Antenna.

2. Connect the Aerial Lead to the Aerial Input socket of an external device such as a VCR.

3. Connect the RF cable from the equipment ‘Out’ to the other equipment ‘In.’

4. Then, connect from the equipment ‘Out’ to “ANT” on the LCD screen Socket on marked.

NOTE

If analogue and digital broadcast signals are provided from the separated cables (antenna), please use a mixer

and RF cable to connect antenna terminal in order to receive both signals.

Precautions when connecting the aerial

Please use a coaxial cable which is free from interference to connect the aerial. Avoid using a parallel ﬂ at feeder

wire as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.

Avoid using indoor aerial as this may be affected by interference. Please use CATV net or outdoor aerial.

If noise appears in the picture of VHF-Low band channel, please use a double-shielded cable (not provided) for

RF LEADS to reduce the noise.

DigitalAnalogue

STB

OUT

VCR

OUT

[Example: Connecting Antenna

through STB and VCR]

Page 16

CONNECTION (continued)

Connecting Procedure (continued)

3. Connecting to External Equipment Terminals on Rear

AV1 can be connected to the equipment with Composite/S-Video/Audio input, and Composite/Audio output. The output signal can support not only Analogue but also Digital Terrestrial TV signals.

[Example]

INPUT Composite/S-Video/Audio

INPUT

(AV1)

IN OUT

If STB is connected to AV1 i n France , it descrambles some of the Pay TV images by resending the signal again (In/Out) .

OUTPUT Composite/Audio

INPUT

(AV1)

VCR

DVD player

Set-Top Box

[Example]

VCR

(Recording Device)

ENGLISH

OUT IN

When you are watching either TV or DTT broadcasting from AV1, you can switch to the other by setting

"Scart Output" in Setup menu. For example, whilst you are watching TV, it is possible to record the DTT programme. Refer to 26 27 about "Scart Output" in Setup menu.

AV2 and 3 can be connected to the equipment with Composite/RGB/Audio input, and Composite/Audio output.

[Example]

INPUT Composite/RGB/Audio

INPUT

(AV2)

IN OUT

VCR

DVD player

Set-Top Box

OUTPUT Composite/Audio

INPUT

(AV2)

OUT IN

[Example]

VCR

(Recording Device)

Page 17

CONNECTION (continued)

Connecting Procedure (continued)

AV4 can be connected to the equipment with either Component or Composite output. Depending on whether the Y/VIDEO input of your selected equipment is Y signal or Video signal, it automatically regards as Component or Composite. When using as Composite, do not insert the jacks into PB or PR.

Y/VIDEO

RPB

AUDIO

L C

MONO

INPUT

(AV4)

OUTIN

[Example]

VCR

DVD player

Set-Top Box

If your external device has a Component terminal, COMPONENT connection is recommended for

higher quality picture

Monitor Out can be used to display same image as main unit on another monitor. When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from composite(AV1~5), or RF signal can be displayed to the external monitor.

VIDEO

AUDIO

OUTPUT

INOUT

[Example]

VCR

(Recording Device)

Sub Woofer terminal can bring the deep bass sound from the external speaker.

OUT

SUB WOOFER

[Example]

Page 18

CONNECTION (continued)

Connecting Procedure (continued)

PC terminals (D-sub 15 pin + audio) is connected to PC, which allows Analogue RGB signal.

IN OUT

(Mini Stereo plug)

[Example]

ENGLISH

HDMI 1 2

terminals can be connected to the devices with HDMI output, or if the external device has DVI output, this can be

available with HDMI-DVI conversion cable. In case of using the HDMI-DVI, connect to audio terminal besides HDMI.

[Example]

VCR

DVD player

Set-Top Box

(HDMI2)

(HDMI1)

IN OUT

(Mini Stereo plug)

(HDMI) (DVI)

(HDMI) (HDMI)

Information

HDMI(High Deﬁ nition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to transmit all video/audio/control signals, which creates easy connection. Moreover, those digital signals can produce high quality data without any degradation. You are provided with two HDMI terminals, one of the most remarkable features.

If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.

NOTE

When both HDMI1 and HDMI2 terminals are connected to devices via HDMI-DVI conversion cable, HDMI2 has a

priority over the audio terminal.

Common Interface Slot

allows you to receive Pay TV service with detachable modules. Before inserting the module, make sure to turn off the main power, and take off the cover of slot as shown and then insert the module all the way into the slot. Refer to 50 for the details. *9700 models only

Remove the slot cover

Push the top of slot cover to release the interlock and lift it the direction as shown.

Common Interface Module

Page 19

CONNECTION (continued)

Connecting Procedure (continued)

Terminals on Side

Since the following terminals are located on the side, it is very convenient to connect an extra device on a temporary basis after completing the connections on the rear panel.

AV5 can be connected to the equipment with S-Video output and composite output.

IN OUT

VIDEO S-VIDEO

INPUT(AV5)

L/MONO

AUDIO

[Example]

VCR

Camcorder

DVD player

Home video game system

If your external device has S-video terminal, S-VIDEO connection is recommended for higher quality picture.

Headphone The detail settings can be adjusted from Audio Menu on page 38.

(Mini Stereo plug)

The audio from the speaker will be muted when connecting the headphone to this terminal.

Photo Input terminal can be connected to a digital still camera or USB card reader with USB cable. For details, refer to the Photo Input function shown on 61~66.

IN OUT

INPUT

PHOTO

NOTE

[Example]

Digital Camera

USB Card reader

This photo input terminal does not support general USB devices such as USB memory. Please do not connect with those devices.

SD Memory Card slot can be used for the Photo Input function with the SD (or MMC) card memory containing pictures. For details, refer to the Photo Input function shown on 61~66.

SD MEMORY

CARD

SD Card / MMC

PUSH-EJECT

Page 20

CONNECTION (continued)

Connecting Procedure (continued)

4. Connecting the plug into the wall socket

Connect the Power Cord after completing all other connections. (The type of plug is different from this drawing for some countries.)

UK only

Except UK

CAUTION

Use only the Power Cord provided. Do not use a power supply voltage other than that indicated(AC220-240V, 50Hz). It may cause ﬁ re or electric shock. For the LCD television, a three-core power cord with a ground terminal is used for efﬁ ciency protection. Always be sure to connect the source converter plug, use an outlet with a ground terminal and screw down the ground line. Ensure that both ends of power cord are easily accessible. If you have to change the power cord, please use the certiﬁ ed power cord that meets your region’s safety standard.

Power Cord

to a grounded outlet and make sure that the cord is properly grounded. If you use a power

ENGLISH

Information

How to secure the cables.

After connecting all of the cables to the terminals, secure them with the band. When you secure the cables, please be careful not to tighten too much.

INPUT(RGB)

AUDIO

ANALOG RGB

INPUT(HDMI)

AUDIO

HDMI2

HDMI1

COMMON

INTERFACE

How to fasten the band:

To tighten

To loosen

Knob

C.1 C.2

Y/VIDEO

SUB WOOFER

A C

ANT

INPUT (AV1)

INPUT (AV2)

INPUT (AV3)

AUDIO

R PB

L C

VIDEO

AUDIO

INPUT

(AV4)

MONO

OUTPUT

SERVICE USE ONLY

POWER SWIVEL

WOW, SRS and symbol are trademarks of SRS Labs, Inc.

Licensed by BBE Sound, Inc. under one or more of the following US patents : 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

Pull the band in the direction of the arrow.

Loosen the band by pushing the knob in the direction of the arrow.

With long band

Page 21

BASIC OPERATION

Power On/Off

Now, turn On the main power to the unit. Make sure that the Power Cord is plugged into the wall socket.

Main Power switch (on the bottom surface)

To turn On the power of the unit:

1. Press the Main Power switch on the unit.

The Indicating Lamp will illuminates in Red (Standby mode).

2. Press Sub Power button either on the control panel or on the remote control. The colour of the Indicating Lamp turns into Green, and the image will

display on the screen.

To turn Off the power of the unit:

1. Press Sub Power button either on the control panel or on the remote control.

The image disappears from the screen and the Indicating Lamp turns into

Red (Standby mode).

2. Press Main Power switch to completely turn Off the power of the unit.

The Indicating Lamp Status Check

Indicating Lamp

Status

Off Off Main power → Off

Red Standby mode

Blinks in Red** Standby mode

Green On

Orange Power Save mode*

Blinks in Orange** Power Save mode

Power Status Power Switch Status

Main power → On Sub Power button → Off

Standby mode as above whilst upgrading DTT version and operating Timer Programming on digital channel.

Main power → On Sub power button → On

Main power → On Sub Power button → On

Power Save mode as above whilst upgrading DTT version and operating Timer Programming on digital channel.

Sub Power button

DTT/TV

SD MEMORY

PUSH-EJECT

PH35814

CARD

* About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on

70 for details.

and

**9700 models only

NOTE

If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on

70~72

It may help you to solve the problems.

You can turn ON the power only by pressing the Sub Power button during the Standby mode. Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction. To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you

leave if there is a power cut during use of the unit.

Page 22

BASIC OPERATION (continued)

Easy Preset

When you turn ON the TV for the ﬁ rst time, your TV automatically leads to the settings of “Language,” “Country” and “Auto Tuning.” (Also, refer to the attached Quick Guide.)

The ﬁ rst screen appeared will ask you to choose the language of your Analogue TV’s display.

2. Using button, select language you preferred from the list and press OK button.

3. Then, using button, select your residing country and press OK button.

4. The auto tuning screen appears, and your TV will now search analogue channels

through the frequencies storing them in order.

Depending on your residing country, it does not proceed to DTT auto tuning (5~8). DTT auto tuning process varies according to the model.

If you have 32/37LD9700U:

5. The dialogue box will appear to ask you if you wish to tune in the DTT channels and select “Yes” so that your TV will start searching the DTT channels.

If you have 32/37LD9700C/N:

5. The box appears to ask you to select language for DTT auto tuning.

6. Using button, select language from the list and press OK button.

7. Then, using button, select your residing country and press OK button.

8. The dialogue box will appear to ask you if you wish to tune in the DTT channels and

select “Yes” so that your TV will start searching the DTT channels.

NOTE

DTT auto tuning is not available on 9600 models. If you want to change the setting after completing this easy preset, press

button

and set up individually.

- See

24 25 41

about the Analogue setting.

about the DTT setting.

Language

English Svenska Norsk Suomi Dansk Česky Polski Magyar Slovenski Hrvatski

Select Return Exit

This is an example of

32/37LD9700U/N.

Setup Auto Tuning

Scanning Channel Number: 33

Cancel

Do you want to start automatic search?

AUTOMATIC SEARCH

BBC ONE BBC TWO BBC THREE BBC NEWS 24 BBCi CBBC Channel

Searching UHF Channel: 61. Please wait. This will take a few minutes. 0%

Cancel search

Cancel

Yes No

ENGLISH

100%

Page 23

BASIC OPERATION (continued)

Volume UP/DOWN

1. To increase the sound volume, press button on the remote control,

or Volume Up button on the control panel.

The Volume Indicator value on the screen will shift right.

2. To decrease the sound volume, press button on the remote control or Volume Down button on the control panel.

The Volume Indicator value on the screen will shift left.

Mute

Volume Up/Down

button

Mute button

1. To mute the sound, press button on the remote control.

The sound of the unit is temporarily turned Off. The colour of the Volume Indicator will turn into magenta

while muting the volume.

2. To turn the sound back, press button again, or Volume Up button on

either remote control or the control panel.

The colour of the Volume Indicator will turn back to green.

NOTE

You can decrease the volume by pressing button

while the sound is muted.

Volume Up button

Volume Down button

Volume 15

The Volume Indicator

SD MEMORY

PUSH-EJECT

PH35814

CARD

Page 24

BASIC OPERATION (continued)

Input Switching to TV/AV1~5, HDMI, and RGB

By pressing Input Select button, you can switch the input. (DTT input: 9700 models only)

o watch actual broadcast, press Input Select button on the control panel,

the numeric buttons or Channel Up/Down button on the remote control.

To display the image outputting from the external equipments

connected to each terminal (DTT / TV, AV1~5, HDMI 1 / 2, and RGB), select corresponding mode.

1. Press Input Select button on the remote control.

2. The Input modes can be also switched by using Input Select button

on the control panel. Each time this button is pressed, the screen displays corresponding mode by following order.

TVDTT AV1 AV2 AV3

AV5HDMI 1HDMI 2RGB

AV4

SD MEMORY

CARD

PUSH-EJECT

3. To directly go back to TV mode, pressing channel Up/Down button on either remote control or the control panel.

Also, you can use the numeric buttons on the remote control.

PH35814

Input Select buttons

ENGLISH

Channel Up/Down button

Channel Up button

Channel Down button

Input Select button

Input Signal Screen Display

The input signal status can be displayed on the screen by pressing the the remote control. (DTT mode: 9700 models only)

The display in DTT mode will also appear as changing the channels and go out in

approximately 3 seconds. Refer to 44 about the information banner.

The display in TV/Video/RGB mode will go out in approximately 6 seconds.

DTT

Programme

name

Channel

Now: ---Next: ----

1. ABCDE

-- -- : -- -- - -- -- : -- --

Signal Level:

-- : --

Broadcasting time

name

ABCDE

TV position Name

Sound mode Off-timer On-timer

VIDEO

Off-timer On-timer

-- -- Min.

OFF

-- -- : -- --

-- -- Min.

OFF

-- -- : -- --

AV1

Composite

Input mode

Signal mode

button

Recall button

RGB

Off-timer On-timer

-- -- Min.

OFF

-- -- : -- --

RGB

H : 48.4kHz

V : 60.1 Hz

Input mode

Input horizontal frequency

Input vertical frequency

Page 25

TV SETUP OPERATION

How to use the On-Screen Display (OSD) system

With the On-Screen Display system, you can access the various kinds of the features and functions in this product.

Picture

Basic Operation

2. To select the item, press button.

Press

button on the remote control or Menu button on the control panel

of the unit. The Main Menu is displayed on the screen as shown on the right.

The selected item will be highlighted in Yellow.

Audio Timer Function Setup Language

Select OK Set

3. Press OK button to set your selection. The selected menu page will be displayed on the screen.

Menu button

4. Use Press

button to choose the item on the MENU page.

button to set your selection.

5. Use button to adjust the item values or choose options. Press OK button to set your selection.

6. To exit from the menu, press

NOTE

button.

The OSD menu screen will be closed automatically when no operation has

been made for about one minute.

If the item in menu is shown in grey, it means that it cannot be selected or

adjusted.

There is another main menu for DTT setting as shown.

Refer to 40 about DTT main menu. (9700 models only)

Main Menu

Channel List Installation Configuration Timers Language TV Setup Common Interface

Menu button

SD MEMORY

PUSH-EJECT

PH35814

CARD

Language Menu

Select the language from the list so that you can display the OSD menu in the selected language.

How to set Language

1. Enter the “Language” menu from the Main Menu.

2. Select the appropriate language with cursor from the list.

The selected item will be highlighted in Yellow.

3. Press OK button to set your selection. The black dot is marked inside of the circle when the selection is ﬁ xed.

4. Press

NOTE

This setting is for Analogue OSD language.

As for the DTT OSD language, refer to "System language" on 41 . (9700 models only)

button to exit from the entire OSD menu.

Language

Select OK Set Return

English Svenska Norsk Suomi Dansk Česky Polski Magyar Slovenski Hrvatski

For 32/37LD9700U/N

Language

English Français Deutsch Italiano Español Nederlands Eλληνικά Τϋrkçe Português Română

Select OK Set Return

For 32/37LD9700C

* The Analogue OSD language for

9600 models will be one of the two options shown depending on country .

Page 26

TV SETUP OPERATION (continued)

Setup Menu (TV mode)

With this menu, you can access various kinds of features relating to TV channel settings.

Auto Tuning

Setup Auto Tuning Manual Tuning Fine Tuning Sort Teletext Language Auto Off Off Scart Output TV

Select OK Set Return

Selected Items Setup hint

( Page 1 )

Select the country where you watch TV so that it starts

Country

( Page 2 ) ( Page 3 )

auto-tuning for appropriate channels. In case that some of the required channels are missed to tune in, set the channels with Manual Tuning Operation.

( Page 4 )

Tune the local channels automatically.

Position

MHz

Press OK button to start searching. Press channel up (+) down (-) buttons to input position

number (1~199, AV00) or channel number (C or S ).

Select the channel entry method, and enter the digits for channel you wish to watch.

Press OK button to start searching.

ENGLISH

Set this to Off normally. If it is set to On when selecting

Off

Descrambler

other than DTT in Scart Output, AV1 (Scart) terminal operates as TV signal output, and the screen changes to

display AV1 (Scart) input signal automatically.

1. Move the cursor to the ﬁ rst digit and select the letters

Manual Tuning

with button.

2. Move to the next digit with ► button.

Name

3. Press OK button again when you ﬁ nish inputting all the letters.

The selectable letters are as follows: “0”~“9”, “A”~“Z”, “+”,

“ ” (blank), “-” (displayed as blank), and “.” (period).

Sound System

Select the sound system from 5 different modes.

Information

Use AV00 when connecting equipment such as a VCR via an RF (aerial type) cable.

Page 27

TV SETUP OPERATION (continued)

Setup Menu (TV mode) (continued)

Selected Items Setup hint

Auto

Colour System

Manual Tuning

Skip

Fine Tuning -56~+56

Sort

PAL

SECAM NTSC4.43 NTSC3.58

Off

On Off

Select colour system from 5 different modes.

It allows you to skip unregistered channels automatically when you use channel up (+) down (-) button to select channels. This function will automatically skip unavailable channels when set to on.

The noise on the screen or interference could be reduced, especially at the area of weak electric ﬁ eld.

► : Increase the frequency data for the main tuner. ◄ : Decrease the frequency data for the main tuner.

You can change the order of channels as follows.

1. Move the cursor to the Channel row you want to change order and then, press

2. The colour of the letters on the designated line will be turned into yellow bracket and with [ ].

3. Move the designated row by using

4. Press OK button to ﬁ x the position.

button.

Teletext Language

Auto Off

Scart Output

Off On

DTT

Monitor

The most appropriate Teletext Language is automatically selected depending on the country which you select in Auto Tuning. In case that the text is not displayed correctly, for example, because of living near a border, select another area as below.

West Europe : West European countries and Turkey. (This is normal setting for use in Europe.) East Europe : East European countries Russian : Farsi : Middle Eastern countries

When no airwave has been received and no operation has been made for 10 minutes in TV mode, it turns to standby mode automatically.

AV1 (Scart) will be ﬁ xed as the selected mode.

When selecting "Monitor", it is possible to monitor only the

composite video signal from AV2, AV3, AV4, AV5, TV, or DTT input

that is displayed on the screen at the same time. DTT output from scart is only available on 9700 models. If "Descrambler" is set to ON when selecting other than DTT, it will

be ﬁ xed as "TV" automatically.

Countries neighboring Russia and East European countries

Page 28

TV SETUP OPERATION (continued)

Setup Menu (AV mode)

With this menu, you can select or adjust the condition of the input signals from each terminal.

System

Colour system

Setup System System 1 Colour System Video Input Scart Output TV

Select Set Return

Selected Items Setup hint

System 1

Do not change the original setting. (System1: Europe/Asia, System2:North America)

System 2

Composite and S-video input only.

Auto

PAL

Select the colour system depending on the input signal.

Generally, select [Auto]. In case that the input signal has too much noise, the

signal level is too low, or the operation is unstable in [Auto], select the system according to the colour system of the input signal.

Composite and S-video input only.

AV1~AV5

System 1

System 2

SECAM NTSC4.43 NTSC3.58

Auto

NTSC-M

PAL-M

ENGLISH

Video Input

Scart Output

AV1

AV4

DTT

Monitor

PAL-N

S.Video

Composite

Auto

HDTV

SDTV/DVD

For AV1 : Select depending on the type of input signal.

The default setting is [Composite]. Select [S.Video] when you want to watch S.Video image. For AV4 : Select the colorimetry depending on the input signal.

Generally, select [Auto].

In case that the colour is not displayed correctly, select

[HDTV] or [SDTV/DVD] to match the input signal.

Component Input only.

AV1 (Scart) will be ﬁ xed as the selected mode.

When selecting "Monitor", it is possible to monitor only

the composite video signal from AV2, AV3, AV4, AV5, TV, or DTT input that is displayed on the screen at the same

time. DTT output from scart is only available on 9700 models. If "Descrambler" is set to ON when selecting other than

DTT, it will be ﬁ xed as "TV" automatically.

Page 29

TV SETUP OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals. By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.

Setup Auto Adjust Adjust Horizontal Position 0 Vertical Position +31 Horizontal Clock –20 Clock Phase 10 Reset Reset

Select Return Exit

Selected Items Setup hint

Auto Adjust

Horizontal Position* -63~+63

Vertical Position* -31~+31

Setup Input Level 0.7V Frequency Display Off WVGA Type Off WXGA Mode Off Vertical Filter On Frequency Mode PC

Select Set Return

Adjust Horizontal Position, Vertical Position, Horizontal Clock, and Clock Phase automatically.

Press OK button to start auto adjustment.

The message “Auto Adjusting” is displayed.

Depending on the type of the signal, there is a possibility

that the display may not be adjusted in its optimum condition with this function. In that case, please adjust each item manually.

Adjust the display position horizontally.

When the position exceeds the possible range, the

display colour will turn into Magenta.

Adjust the display position vertically.

When the position exceeds the possible range, the

display colour will turn into Magenta.

Horizontal Clock* -31~+31 Minimize the vertical stripes on the screen.

Minimize the blurring of the letters and stripes on horizon-

Clock Phase* 0~63

tal row.

Make sure to adjust Horizontal Clock ﬁ rst before

adjusting Clock Phase.

Reset

Reset all the set values on this Menu page to original factory settings.

Page 30

TV SETUP OPERATION (continued)

Setup Menu (RGB mode) (continued)

Selected Items Setup hint

Input Level

Frequency Display

WVGA Type

WXGA Mode

Vertical Filter

Frequency Mode

0.7V

1.0V

1280x768 1366x768

Movie

Normally, select [0.7V]. Select [1.0V] only when the whole display becomes too

white.

Off

Select whether indicating the PC signal frequency information on Input Signal Screen Display or not.

It allows you to switch display size to [Full] and [Real]. (See

Off

“Size Switching” on 55 for the details.)

This function is available only for WVGA signal.

Refer to “Recommended Signal List” on 75.

Off

This function is available only for WXGA signal. Refer to “Recommended Signal List” on

Off

Reduce the ﬂ ickers on the screen when set to [On].

On PC

This mode is not available. (It is shown in grey.)

ENGLISH

Information

The items indicated by “*” can be automatically stored depending on the signal mode.

The signal mode is identiﬁ ed by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost

same values in all the above items might be regarded as the same signal. The item “Auto Adjust” cannot be stored. Press OK button to start auto adjustment as needed.

Page 31

TV SETUP OPERATION (continued)

Function Menu

This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful functions, such as Freeze Mode and Photo Input.

Selected Items Setup hint

Black Side Panel

Video Power Save

Freeze Mode

Default Zoom

Reset

Function Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Reset Reset

Select Set Return

This can change the colour of sidebars showing up in

Off

normal mode. (Off:grey, On:black) Please note that it is not available while operating Photo

Input function. During AV input, this helps to reduce power consumption

Off

when there is no video signal. In case of selecting AV input terminal which does not have signal input, it changes the power status to power save mode in AV4 and standby

mode in other AV input. (See 68 in details.)

Split

This is the useful function to watch the program in both still and active pictures. (See 60 in details.)

Strobe

Split: half sized images Strobe: thumbnail sized images

Panoramic

4:3

You can set the display size for TV / AV input screen appearing ﬁ rst when turning the main power On.

Full

14:9zoom

Each item on this menu screen can be restored to the original factory settings by pressing

Function Background 1 Slide Effect 1 Slide Interval 5Sec. Slide Music Off Slide Mode 1 Reset Reset

Select Set Return

button.

Page 32

TV SETUP OPERATION (continued)

Function Menu (continued)

Selected Items Setup hint

Background

Slide Effect

This is available only for Photo Input function. Switch the pattern of background. See details on 65.

Off

This is available only for Photo Input function. You can select the method of switching slides during slide show.

See details on 63.

ENGLISH

Slide Interval

Slide Music

Slide Mode

Reset

5Sec. 10Sec. 30Sec.

Off

This is available only for Photo Input function. You can select the interval time for switching slides during slide show. See details on 63.

This is available only for Photo Input function. You can select the preferred Background Music during slide show.

See details on 63.

2 1

This is available only for Photo Input function. You can select where to start the slide show. See details on 63.

Each item on this menu screen can be restored to the original factory settings by pressing

button.

Page 33

TV SETUP OPERATION (continued)

Picture Menu (TV/AV mode)

In this menu, you can make speciﬁ c adjustments for the picture based on your preference. By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.

Picture Picture Mode Natural Contrast +31 Brightness –31 Colour Sharpness +15 Hue Colour Temperature Normal Contrast Mode Normal Back Light +20 Reset Reset

Select OK Set Return

Picture Natural YNR Off CNR Off Film Mode On 3D Comb Filter Off LTI Off CTI Off Black Enhancement Off Auto Colour Off Reset Reset

Select OK Set Return

Selected Items Setup hint

Dynamic

Picture Mode

Natural

Cinema

Contrast*

-31~+31

(+32~+40)

Brightness* -31~+31

Picture Natural Colour Temp. Adjust Colour Management Colour Decoding

Select OK Set Return

You can make the best selection from 3 modes depending on the lighting condition and intended use. Dynamic: Suitable for the brighter conditions. Natural : Suitable for the normal lighting condition. Cinema : Suitable for watching movie.

This adjusts the contrast to meet the lighting environment by using button.

The maximum value can be extended to [+40] by

pressing and holding ► button at [+31], which changes the colour between those numbers from yellow to magenta. This is the special feature prepared for the dark scene. At the normal condition, it is recommended

to set the value less than [+31]. With this function, black is adjusted to change the overall brightness by using button.

Colour* -31~+31

Sharpness* -15~+15

Hue* -31~+31

Cool

Colour Temperature*

Normal

Warm

Black/White

It can adjust colour density based on your preference by using

button.

Preferred sharpness can be adjusted by pressing ◄ button for Softer image or ► button for Sharper image.

Pressing ◄ button enhances red and weakens green, while pressing ► button weakens red and enhances green. The setup hint is adjusting for the realistic skin colour.

You can select from 4 settings (default) depending on the colour condition with

button.

Page 34

TV SETUP OPERATION (continued)

Picture Menu (TV/AV mode) (continued)

Selected Items Setup hint

Dynamic

Contrast Mode*

Back Light -20~+20

Reset

YNR*

CNR*

Film Mode*

Normal

Auto

High

It allows you to choose from 3 modes. Dynamic: Sharpen the gradation to improve the contrast feeling. Normal: Reproduce as faithful gradation as possible. Auto: Adjust to natural brightness without blurred white by detecting the bright parts on images.

Adjust the brightness of the Back Light for the maximum visibility.

Each item on this menu screen can be restored to the original factory settings by pressing

Off

This is a noise reduction system for picture signal.Low

Off

This is a noise reduction system for colour signal.Low

Off

On: Automatically identify if it is the movie ﬁ lm and faithfully reproduces the original ﬁ lm images.

Off: Set to Off if the image does not look natural.

ENGLISH

button.

3D Comb Filter*

LTI*

CTI*

Black Enhancement*

Auto Colour*

Off

Low

High

Off

Low

Middle

High

Off

Low

Middle

High

Off

Low

Middle

High

Off

This is available only when receiving NTSC/PAL composite signal. This reduces the dot and colour blurring in minute scales so that it can reproduce purer colour.

Adjusts the sharpness of the picture signals.

Adjusts the sharpness of the colour signal.

Adjusts the black level compensation.

This monitors and adjusts the colour to maintain constant colour levels. It also maintains natural ﬂ esh tones while preserving ﬁ delity of background colours. This is available only when receiving an NTSC composite and S.Video signal.

Reset

Each item on this menu screen can be restored to the original factory settings by pressing

button.

Page 35

TV SETUP OPERATION (continued)

Picture Menu (TV/AV mode) (continued)

Selected Items Setup hint

Colour Temp. Adjust**

Colour Management**

Colour Decoding

Off

RGB/R/G/B

Amplitude

Red

Green

Blue

Cut off

Red

Green

Blue

Magenta

Red Yellow Green

Cyan

Blue

Red**

Green**

Colour*

Hue*

On: When you want to set speciﬁ c adjustments in each of

the 4 Colour Temperature modes. You can adjust on the amplitude and cut off. The settings reﬂ ect on the Colour Temperature.

Amplitude: subdue the following colours on the

brighter parts.

Cut off : subdue the following colours on the darker

parts.

Off: Remains as default setting.

On: Turn On to adjust the balance of each colours

depending on the user’s preference. The settings reﬂ ect in each of the 4 Colour Temperature modes.

Off: Remains as default setting.

This can adjust R/G/B level and Hue to make the colour appear naturally for the user’s appearance. First, select RGB (multiple colour screen) or R/G/B(single colour screens) to check the colour decoding effects while adjusting. Then, you can adjust the level of colour (red and green), colour intensity, and Hue. Press

to save the setting. The settings reﬂ ect in each of the 4 Colour Temperature modes.

OK button

Information

The items indicated by “*” can be stored the setting for each of inputs and picture modes (Dynamic/Natural/Cinema). You can enjoy different setting depending on the selected input such as VCR in AV1.

In addition, the items indicated by “**” can be stored for each of colour temperature modes.

Page 36

TV SETUP OPERATION (continued)

Picture Menu (RGB mode)

In this menu, you can make speciﬁ c adjustments for the RGB picture based on your preference.

Selected Items Setup hint

Contrast

-31~+31

(+32~+40)

Brightness -31~+31

Colour -31~+31

Picture Contrast : +31 Brightness : –31 Colour : 0 Hue : +31

Picture Enhancement Colour Temperature : Normal Colour Temp. Adjust Back Light : +20 Reset Reset

Select OK Set Return

: Off

This adjusts the contrast to meet the lighting environment by using button.

The maximum value of the menu display can be

extended to [+40] by pressing and holding ► button at [+31], which changes the colour between those numbers from yellow to magenta. This is the special feature prepared for the dark scene. At normal condition, it is recommended to set the value less than [+31].

Adjust according to personal preference by using button.

ENGLISH

Hue -15~+15

Off

Low

Picture Enhancement

Middle

High Cool

Normal

Colour Temperature

Warm

Black/White

Pressing ◄ button enhances red and weakens green, while pressing ► button weakens red and enhances green. The setup hint is adjusting for the realistic skin colour.

You can select the preferred sharpness on detailed parts.

You can select from 4 settings (default) depending on the lighting condition with button.

Page 37

TV SETUP OPERATION (continued)

Picture menu (RGB mode) (continued)

Selected Items Setup hint

Amplitude

Red

Green

Colour Temp. Adjust.**

Back Light -20~+20

Reset

Information

There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset every time. Furthermore, the following items can be stored more speciﬁ cally.

In addition, the items indicated by “**” can be stored the setting for each of colour temperature modes.

Off

Each item on this menu screen can be restored to the original factory settings by pressing OK button.

Blue

Cut off

Red

Green

Blue

On: When you want to set speciﬁ c adjustments in each of

the 4 Colour Temperature modes. You can adjust on the amplitude and cut off. The settings reﬂ ect on the Colour Temperature. Amplitude: subdue the following colours on the

brighter parts.

Cut off : subdue the following colours on the darker

parts.

Off: Remains as default setting.

Adjust the brightness of the Back Light for the maximum visibility.

Page 38

TV SETUP OPERATION (continued)

Audio Menu

With this menu, you can adjust and customize the audio condition as you like. You can move on to the next menu screen by pressing ▼button at the bottom.

Audio Audio Mode Treble : +15 Bass : –15 Balance : 0 SRS TruBass : Low BBE : Low Perfect Volume : Off Internal Speaker : On Reset Reset

Select Set Return

Selected Items Setup hint

: Movie

: Normal

Audio

Head Phone Volume Head Phone Select : A/B

Select Adjust Return

: +20

ENGLISH

Movie Music

Audio Mode

Speech

Favourite

You can select the most suitable sound condition from 4 alternatives according to the contents. If you want to adjust each item value based on your preference, select “Favourite”.

Treble** -15~+15 Adjust the Treble. Bass** -15~+15 Adjust the Bass. Balance -10~+10

Adjust the balance of the sound from right and left speakers.

Off

SRS

Normal

This system gives you the dynamic 3D sound. Select it depending on your preference.

Wide

Off

TruBass

Low

TruBass gives you the enchanced bass sound. Select it depending on your preference.

High

Off

BBE High Deﬁ nition Sound restores clarity and presence

BBE

Perfect Volume**

Low

High

for better speech intelligibility and musical realism. Select it depending on your preference.

Off

It will automatically adjust the volume to its average level each time you change the channel.

Internal Speaker

Reset

This needs to be switched to Off when you want to take

Off

audio from external epuipment. It is normally set to On when you operate the set using

the built in speakers. Reset all the set values on this Menu Page to the original

factory settings.

Page 39

TV SETUP OPERATION (continued)

Audio Menu (continued)

Selected Items Setup hint

It allows you to adjust the volume of the headphone. The

Headphone Volume 0~63

A/B

Headphone Select

NOTE

The headphone output is NOT available when the image from the RGB or Photo Input is on the screen.

sound from the speaker will automatically set to MUTE when the headphone is connected to the terminal.

Select either side of the display that you want to hear the sound with headphone during 2-picture mode. (See “Multi Picture Mode” on 56)

A/B : You can select either side A (left side) or side

B (right side) which the sound comes into the headphone. The speaker icon will be displayed on the side you select.

B : You will hear the sound only from the side B (right

side) of the display.

Information

The items indicated by “**” can be stored the setting for each of Audio Mode.

Timer Menu

This allows the unit to turn Off (Standby mode) or On at set time automatically, which you may ﬁ nd useful.

Off Timer

Timer Off Timer On Timer

Select Adjust Return

Selected Items Setup hint

--Min. 30Min. 60Min.

This function automatically sets the power to Standby mode when the selected time period has elapsed.

90Min.

: 30Min. : -- : --

On Timer --:--

120Min.

This function automatically sets the power from standby mode to On when the speciﬁ ed time period has elapsed. Input the desired time within the range of 00:00 to 11:59

by using button on the remote control.

Page 40

TV SETUP OPERATION (continued)

Analogue Teletext

How to operate the Teletext

You can display the Teletext simply by pressing the remote control buttons.

NOTE

Select Teletext language from Setup Menu shown on 26 .

Operation Press

To activate Teletext mode. To exit from the Teletext mode.

To split the screen into two and watch both Teletext information and actual broadcast at the same time. Press again to watch Teletext on a single screen.

To display Index page.

To access Subtitle service directly (if the channel has the Subtitle service broadcasting).

Page Number

Link pages

12 : 34 : 56

ENGLISH

Red Green Yellow Blue

[TVÙText]

[TextÙTV+Text]

[Index]

[Subtitle]

To display Hidden text. ex. The answers of the Quiz or the Game page. Press again to close the revealed answer.

[Reveal]

To return to actual broadcast temporarily while searching for the Teletext page you request. When the search is done, the designated page # will be displayed on the upper left of the screen.

[Cancel]

Press again to return to Teletext page. To access the link pages which are displayed at the bottom of the page.

(Select the buttons corresponding to the colours of the letters on screen.)

To hold the text picture.

[Colour]

2-4-12

[Hold]

Information Each time the Some Teletext pages do not display Link Pages at the bottom of the screen. Press

button is pressed, the screen will be switched from double screen to signal screen.

button to display them.

Page 41

DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION

Digital Terrestrial Television (DTT) operation is not available on 9600 models.

How to use the On-Screen Display (OSD) system

With the On-Screen Display system, you can access the various kinds of the features and functions in this product.

Basic Operation

2. To select the item, press button.

3. Press OK button to set your selection.

4. Use button to choose the item on the MENU page.

5. Use button to adjust the item values or choose options.

6. To exit from the menu, press

NOTE

The OSD menu screen will be closed automatically when no operation has

been made for about one minute.

Press

button on the remote control or Menu button on the control panel

of the unit. The DTT Main Menu is displayed on the screen as shown on the right.

The selected item will be highlighted in Yellow.

The selected menu page will be displayed on the screen.

Press OK button to set your selection.

button.

About DTT Function

Main Menu

Channel List Installation Configuration Timers Language TV Setup Common Interface

*This is the example of 32/37LD9700U.

Menu button

SD MEMORY

CARD

PUSH-EJECT

Please note that the DTT function of your television has several differences depending on the model and service of each country. Check the reference page for the details.

Menu / Function Difference Page

1. OSD

For 32/37LD9700C/N, "Channels" appears in the main menu, and "Channel List" can

Channels (Channel List)

be selected from "Channels" menu. For 32/37LD9700U, "Channel List" appears in the main menu.

Channel Sort Available only for Country Audio Language

Subtitle 47

The preferred country can be selected from "Country" only for

The selectable items from the menu are different.

32/37L

D9700C/N. 43

32/37L

D9700C/N.

2. Service

Receiver Upgrade Digital Teletext 44 Electric Programme Guide (EPG) 45

Depends on the service of each country.

Timer programming 46

24 40 42 43 48

PH35814

Page 42

DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)

Changing Preset

If you want to change the setting after completing the easy preset, set up individually as follow. Refer to 21 about the easy preset.

Re-Installing DTT channels

Reset to the factory setting.

1. Press

button on the remote control.

2. Select "Installation" on the DTT main menu.

3. Select "First Time Installation".

4. Select the preferred language by using

button and

press OK button. (32/37LD9700C/N only)

5. Select the country where you watch by using button and press OK button. (32/37LD9700C/N only)

6. The message appears as shown. Press "Yes". Searching for New Channels.

1. Press

button on the remote control.

2. Select "lnstallation" on the DTT main menu.

3. Select "Add New Channels".

4. Choose either "Automatic Search" or "Manual Search". ("Automatic Search" (recommended) searches through all available broadcast frequencies for free-to-air channels whereas "Manual Search" searches on a single broadcast frequency.)

Your previous digital channel list will be erased. Are you sure you want to delete all digital channels and settings for ﬁ rst time installation?

Yes

Changing System Language (OSD) and Country

ENGLISH

If you want to change the setting after completing Easy Preset process, press

●System Language

You can select your preferred OSD language on DTT mode.

1. Press

button on the remote control.

2. Select “Conﬁ guration” on the DTT main menu.

3. Select “System language.”

4. Select the language by using button and press button on the remote control.

For 32/37LD9700U/C English ↔ Français ↔ Deutsch ↔ Italiano ↔ Español

(English) (French) (German) (Italian) (Spanish) For 32/37LD9700N

English ↔ Svenska ↔ Dansk ↔ Suomi (English) (Swedish) (Danish) (Finnish)

CONFIGURATION

System Language

Country Audio Language Subtitle Favourite Mode Receiver Upgrade Parental Settings

Change Default System Language

The item “Country” appears only for 32/37LD9700C.

●Country (only for 32/37LD9700C/N)

Select the country where you watch TV. It will have an effect on the tuning.

1. Press

2. Select “Conﬁ guration” on the DTT main menu.

3. Select “Country”.

4. Select the country by using button on the remote control.

button on the remote control.

button to set up individually.

English

France English Off Off C-V.1.0

For 32/37LD9700C France ↔ Germany ↔ Spain ↔ Italy

For 32/37LD9700N Sweden ↔ Denmark ↔ Finland

Page 43

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Channel Selections

There are 4 ways to select the channels: stepping through the channel, selecting by number, selecting from the onscreen channel list, and using the Electronic Programme Guide (EPG).

Stepping through the Channel

Press CHANNEL UP/DOWN button to switch the next or previous channel on the list. Information banner is displayed every time channel is switched.

Refer to

about the information banner.

Selecting from the On-screen Channel List

1. Press

2. Select “Channel List” (from “Channels” if your TV is

3. Use button to move through the list, and RED/GREEN to

4. Press OK button to select the channel, along with a quarter

5. Press

button on the remote control.

32/37LD9700C).

display next or previous page.

screen image of the selected channel.

button again to return the normal full screen.

CHANNEL LIST

1. BBC ONE

2. BBC TWO

3. ITV 1

4. Channel 4

6. ITV 2

7. BBC THREE

9. Teletext

10. BBC FOUR

11. Sky Travel

12. UKHistory

Selecting by Number

Enter the number based on its channel list by the numeric buttons on the remote control. A small box appears in the upper left corner of the screen to show entered number. Channel is switched along with the information banner. If the entered number is not valid for one of the setup channels, it automatically selects the closest channel.

Delete Edit Name FavouritesLockSelect

WatchSelect ChannelFunction

BBC ONE

Using the Electronic Programme Guide (EPG)

Press The EPG screen displays a list of the stored channels (5 channels per page) along with the description of the programme being broadcast.

To change channels, use Refer to 45 regarding Electronic Programme Guide for details.

Please note that DTT menu and Teletext image (without picture) cannot be supported at the same time. (Audio and picture are available.) The followings are the examples.

• If the quarter images on EPG or Channel List screen is from Teletext, those images cannot be displayed.

• If you try to display the menu whilst displaying Teletext (without picture), the teletext screen becomes unavailable.

button to access EPG screen.

and RED/GREEN buttons and then OK button.

NOTE

Page 44

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Channel Sort

If your TV is 32/37LD9700C in Spain, Germany, or Italy and 32/37LD9700N in Denmark, you can sort the channels manually as you want. (The channels in UK, France, Sweden and Finland will be automatically sorted when installing.)

1. Press

button.

2. Select “Channels” on the DTT main menu.

3. To sort the channels, select “Channel Sort” by pressing

button.

4. Select the channel you wish to sort with button and then press OK button.

5. Using button, shift the channel to the preferred position and press OK

button.

Channel Editing

1. Press

2. Select “Channel List” (from “Channels” if your TV is

32/37LD9700C/N) on the DTT main menu.

3. To edit the channel, highlight the required channel with

button.

4. Then, using button to select one of the buttons at the

bottom of screen depending on the needs.

button on the remote control.

CHANNEL SORT

1. WDR

2. FAB

3. BBC World

4. Südwest BW/RP

CHANNEL LIST

1. BBC ONE

2. BBC TWO

3. ITV 1

4. Channel 4

6. ITV 2

7. BBC THREE

9. Teletext

10. BBC FOUR

11. Sky Travel

12. UKHistory

ENGLISH

SetSelect Channel

Delete Edit Name FavouritesLockSelect

BBC ONE

WatchSelect ChannelFunction

Button Functions Procedures Delete

Delete the unwanted channel. The warning message shows up to conﬁ rm the

Rename the channel. The channel name highlighted with the ﬁ rst

Edit Name

Lock the channel with the code. The password dialogue is displayed.

Lock

Set as a favourite channel. Only selected channels will appear

Favourites

when using control to change channel.

5. Press OK button to save the change.

6. Press

button to return to normal broadcast viewing.

button on the remote

deletion.

character appears. Use of character. Then, pressing

button to select each

button changes the highlighted characters (ex. UP key : a → b, DOWN key : b → a). Numeric buttons can be also used to replace the highlighted character. Refer to the “Character Input” table as shown below for details.

Enter the parental Lock code. Refer to 48 regarding the parental Lock code. The icon (

) appears to identify it as the favourite channel. To activate this setting, Favourite Mode needs to be turned ON from the Conﬁ guration menu. (See

for Favourite Mode.)

Character Input : You can edit the name of channel by using numeric buttons of remote control as below.

Numeric

buttons

Character

1234567890

ABC

abc

DEF

def

GHI

ghi

JKL

jkl

MNO

mno

PQR

pqr

STU

stu

VWX

vwx

yz&.

Blank

+-*/!

* By pressing button, further characters and punctuation marks can be selected besides all of the above.

Page 45

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Utilizing the Infomation Tool

Information Banner

Whenever the channels are changed using the button or numeric buttons, the TV displays the picture along with an information banner at the bottom of screen for approximately 3 seconds. The information banner also

appears by pressing button whilst watching DTT. Press it again to return to normal viewing screen.

Digital Teletext

Teletext can provide various information with text on the screen.

(32/37LD9700U only)

B B C Weather

• Press button to access. Press it again to return to the normal screen.

• You can also access Teletext screen by pressing RED button, depending on the programme being broadcast.

BBC ONE

At the time, Press RED box might appear on the upper right corner on the screen.

• Digital teletext and subtitles cannot be activated at the

Press TEXT to exit Press 0 for full screen TV

HOME SHORTCUTS BACK BBCi MENU B B C 1

same time. Subtitle should be turned off to activate teletext.

• If you try to activate teletext during subtitles ON, the dialogue box appears to ask you to turn subtitles off as shown.

Interactive services cannot be used while subtitles are on. Would you like to turn subtitles off now?

Now: 50/50 Next: Ace Lightning

1. BBC ONE

Signal Level:

Weather

UK Outlook Regional 24 Hour Forecast Regional 5 Day Forecast World Cities

16:10-16:35 16:35-17:00

19:28

03:01 15 Sep

Yes

Operation Press

This switches the receiver between the TV mode and TELETEXT mode.

[TV TEXT] Use this to access a subtitle service directly rather than through a TELETEXT service (subject to subtitle service broadcasting).

[Subtitle]

Each of these buttons selects a link page displayed at the lower part of the screen. [Colour]

NOTE

When you are asked to press SELECT in the menu of digital teletext, press OK button on the remote control.

NOTE

The service of digital broadcasting signal varies depending on the country. Therefore, the Teletext for 32/37LD9700C/N is displayed as Analogue Teletext.

See 39 how to operate at Analogue Teletext mode.

Page 46

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Utilizing the Infomation Tool (continued)

Electronic Programme Guide (EPG)

Like the Channel Lists, the EPG screen displays a list of the stored channels along with information on what programmes are being broadcast. You will have either 7 days EPG or Now and Next EPG if the service is available.

7days EPG

1. Press button to display EPG screen.

2. Select channels with button.

3. Show programmes on channels in 7days by the following colour buttons. RED; Time backward GREEN; Time forward YELLOW; Day backward BLUE; Day forward

4. Select desired programme using button and then button. The description of desired programme shows up if available.

5. Press and Next EPG”

button

to switch between “7 days EPG” and “Now

ELECTRONIC PROGRAMME GUIDE (7 Day) Tuesday 29/3 15:37

Clifford the Big Red Dog CBeebies. King Mac: When T-Bone thinks he is responsible for getting

Mac in trouble, he goes overboard to help Mac in any way he can. But Mac takes advantage of his friend’s guilt.

Channels

1. BBC ONE

2. BBC TWO

3. ITV1

4. Channel 4

5. five

6. ITV2

7. BBC THREE

Programmes on Tuesday 29/3, 15:00 - 17:00

14:35 Murder, She Wrote 15:20 BBC News 15:25 Clifford the Big Red Dog (Now) 15:40 Arthur 16:05 Planet Cook 16:25 BB3B 16:45 Tracy Beaker

Change DayChange TimeNavigate

15:25-15:40

ENGLISH

Now and Next EPG

1. Change to “Now and Next EPG” from “7 Days EPG” menu with

key.

2. Select the page containing desired channel with RED or GREEN buttons and the desired channel using

button.

3. Select Current Event or Next Event using button.

4. The detailed description of programme shows up if available. If it is too long to ﬁ t into the text window, use YELLOW or BLUE buttons to see it.

Press button again to return to the normal screen. Timmer Programming is available among the programmes in the future. See

NOTE

• Not all channels broadcast all programme information data. Some channels do not provide programme name and details. In that case, only channel names are displayed.

• The 7 day EPG function may not be available in all countries or broadcasts.

• For 32/37LD9700C/N, “Now and Next EPG” will be displayed ﬁ rst by pressing button.

ELECTRONIC PROGRAMME GUIDE BBC NEWS 2440

AS Guru: General Studie...

A General Studies programmes for AS Level students, looks at Culture Arts and Humanities

Channels

1. BBC ONE

2. BBC TWO

7. BBC THREE

30. CBBC Channel

40. BBC NEWS 24

in details.

03:00-04:00

Current Event

Star Sale AS Guru: General Studie... George Michael’s Millions This is CBBC! BBC News

Next Event

BBC News 24 AS Guru: General Studie... Two Pints of Lager and... This is CBBC Asia Today

WatchNext EventNavigate

More Information Display

Each of the menu pages and EPG pages has at the bottom of the page.

By pressing + button whilst displaying those pages, a box appears showing how to proceed the next step. Press it again to exit the display.

i+ More

displays

Exit Help

Press UP/DOWN to navigate, OK to watch the highlighted channel, RIGHT to toggle to the next event, RED/GREEN to scroll page up/down, MENU to view 7 Day EPG.

[Example : Now and Next EPG]

Page 47

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Timer Programming

Timer Programming is available to not only record multiple programmes but also remind you that the desired programme is about to start whilst you are watching another channel.

From “Timers” Menu

You can record multiple programmes from “Timers Menu”.

1. Press

2. Select “Timers” from the DTT main menu.

3. Highlight the item on the row of “Mode” using button.

4. Press OK button to display the timer entry window.

5. Set channel name using

6. Set Start Time, End Time, and Date with the numeric buttons.

7. Set the frequency mode (Once, Daily, or Weekly) using

8. Press

9. Press

10.The message appears to ask “Switching to timer channel”

button on the remote control.

button.

button to return to the Timer Screen. The mode will automatically be set to “Active” if time and date are valid. (The message “Entered time is not valid” is displayed if invalid and “Please choose a date and time in the future” is displayed if not input.).

button or OK button to set up. to remind you that the selected programme is about to start. If

in menu operation or displaying other than channel programme screen, the message “A programme that you set a timer for has started. Would you like to switch to [channel name]?” is displayed.

PROGRAMME TIMERS

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2006 Active

2. BBC TWO 08:00 09:00 12/06/2006 Active

3. BBC THREE 10:00 11:00 12/06/2006 Active

4. BBC ONE 01:00 01:00 01/01/2006 Inactive

5. BBC ONE 01:00 01:00 01/01/2006 Inactive

6. BBC ONE 01:00 01:00 01/01/2006 Inactive

7. BBC ONE 01:00 01:00 01/01/2006 Inactive

8. BBC ONE 01:00 01:00 01/01/2006 Inactive

11/05/2005

Name: Start: End: Date: Mode:

3. ITV 1 20:00 [2] 1:00 12/05/2006 Once

OKMENU

Edit TimerExitToggle Mode

19:54

* The selected channel can be watched or recorded via Scart 1

Output. Refer to 15 for the details.

From EPG Screen

If you ﬁ nd the programme you wish to record on EPG screen, you can directly set the timer from EPG screen.

1. Press button to display EPG menu.

2. Using button, select the programme you wish to record.

3. Press OK button so that it leads to the Timers menu screen.

4. After conﬁ rming the setting, press button to return to EPG screen.

NOTE

• Timer Programming can be set until 31, Dec 2037.

• You can set timers up to 8 programmes in total. If you try to set more than that, the box will ask you to deactivate one of them.

• A timer can not be set if it is overlapped with another. The box will appear if there is an overlap timer.

Page 48

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Conﬁ guring the Setting

Setting Audio and Subtitle Language

The available audio and subtitle languages can be checked from “Language” menu. Then, you can set your preferred language from “Conﬁ guration” menu as below.

Audio Language

1. Press

2. Select “Conﬁ guration” on the DTT main menu.

3. Select “Audio Language” to highlight it.

4. Use button to select the language.

button on the remote control.

CONFIGURATION System Language Audio Language Subtitle Favourite Mode Receiver Upgrade Parental Settings

English English Off Off C-V.1.0

For 32/37LD9700U English Welsh Gaelic

Change Default Audio Language

For 32/37LD9700C English French German Italian Spanish

For 32/37LD9700N English Swedish Danish Finnish

Subtitle

1. Press

2. Select “Conﬁ guration” on the DTT main menu.

3. Select “Subtitle” to highlight it.

4. Use button to select other than “Off” in order to be activated.

button on the remote control.

ENGLISH

For 32/37LD9700U Off

English Welsh Gaelic

For 32/37LD9700C Off

English French German Italian Spanish

For 32/37LD9700N

English Swedish Danish FinnishOff

You also can turn subtitles On/Off by pressing button.

Page 49

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Conﬁ guring the Setting (continued)

Setting the Protection

There are various kinds of protection to avoid certain operations: Channel Lock and Menu Lock (Main Menu Lock and Installation Lock).

Set Lock Key

To use the locks effectively, do change the PIN code from the factor y default setting, which should be known and remembered only by you. The default setting is 0000.

1. Press

2. Select “Conﬁ guration” on the DTT main menu.

3. Select “Parental Setting”

4. A box asking for the Lock key is displayed. Enter the current PIN code.

5. From the next box appeared, select “Set Lock Key”

6. Enter new password twice.

button on the remote control.

Menu Lock Installation Set Lock Key

Lock Key **** Conﬁ rm

7. Press

button to return to normal viewing in order to activate the lock.

Channel Lock

With Channel Lock, any channel can be locked so that it cannot be selected for viewing without four digits PIN code(See above).

1. Press

button on the remote control.

2. Select “Channel List” (from “Channels” if your TV is 32/37LD9700C).

3. Highlight the channel which you want to lock with button.

4. Select

5. Press OK button to set up and enter Pin Number.

6. Press

Lock

button at the botton of screen with button.

button to activate it.

Menu Lock

If re-installing the complete channel list, “Channel Lock” loses its effect. To avoid this, “Installation Menu Lock” can be set.

1. Press

2. Select “Conﬁ guration” from the DTT main menu.

3. Select “Parental Settings” on the conﬁ guration menu.

4. The dialogue box appears to enter the lock key.

5. Another dialogue box is displayed as shown.

6. Highlight “Menu Lock” and use button to select “Installation”.

button on the remote control.

Menu Lock Installation Set Lock Key

7. Return to the normal TV viewing to activate it.

This locks out the complete menu system. Main menu is only available with the PIN code. Without the code, the user cannot add, delete, rename, move channels, and set timers. To activate “Main Menu Lock”, follow the same steps except #6 selecting “Main Menu” instead of “Installation”.

Page 50

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Conﬁ guring the Setting (continued)

Upgrading DTT

The DTT can be upgraded via the conﬁ guration menu.

1. Press

2. Select “Conﬁ guration” from the DTT main menu.

3. Select “Receiver Upgrade”.

4. Press with “Enabled”. Automatic upgrade method takes place in standby/power save mode. The indicator lamp will blink whilst this is taking place.The TV will check if new software is available every time you go to standby/ power save or every night at 3:00 a.m. if select “Enabled”. You can check the current software version on the conﬁ guration

menu. (See

button on the remote control.

Automatic Download Enabled Search for New Version

MENU EXIT i+ More

NOTE

button to select “Automatic Download” along

as an example.)

• Manual upgrade starts if the “Search for New Version” button is pressed instead of “Automatic Download” button. To use this method, follow each dialogue box in sequence.

• We do not recommend that the se t is left in stan d by/power save mod e if you in ten d to leave th e ho me for a long ti me .

• While downloading software, you cannot operate TV. No picture is displayed, either.

ENGLISH

Setting Favourite Mode

By activating Favourite Mode from the conﬁ guration menu, only selected favourite channels will appear when using

button on the remote control to switch channels.

Refer to

1. Press

2. Select “Conﬁ guration” from the DTT main menu.

3. Select “Favourite Mode”.

4. Use button to select “On” to be activated.

how to set the channel as Favourites.

button on the remote control.

Page 51

DI GITAL TERRESTRI AL TEL E VISION (DTT) OPERATION (continued)

Common Interface

Common Interface enables you to plug in a module which for example receives Pay TV service. Once the common interface module has been successfully inserted, select a service from the DTT main menu as follows.

1. Press

button on the remote control.

2. Select “Common Interface” to show a new menu.

3. Select one of the buttons to enter that module’s menu.

Common Interface

Media Guard

Figure 1. Common interface Menu with modules inserted into the slots.

Common Interface

No Common Interface module detected.

Figure 2. Common interface without modules inserted.

Each module display different item, depending on the module inserted.

NOTE

Please ask the service provider if the module type is suitable for TV. The TV supports modules meeting DVB standard.

TV Setup Menu

“TV Setup” menu can be accessed from the DTT main menu. As selecting “TV Setup”, it jumps to the TV main menu containing Analogue TV functions.

Refer to 24 ~ 39 regarding the settings for details.

Picture Audio Timer Function Setup Language

Select OK Set

Page 52

FUNCTION

Power Swivel

With the Desktop stand, you can adjust the angle of the panel side to side by pressing control.

1. Press

SWIVEL

button on the remote control.

The Swivel Display (as shown in the ﬁ gure on the right) will appear on the screen.

2. Adjust the angle of the panel with button while Swivel Display is on the screen.

The unit will be able to rotate ±30 degrees to each side.

CAUTION

When you use the Power Swivel function, make sure that the Power Cord, cord

or chain connected to the wall is loose enough to operate the Swivel function securely.

Do not put hands or face near the unit while operating the Swivel. It could cause

personal injury. Beware especially when small children are around the unit.

NOTE

If the stand cable is not connected to the unit, the message “Not Available”

will appear on the screen.

The Swivel Display will automatically disappear when no operation has

been made for about 6 seconds.

SWIVEL

button on the remote

ENGLISH

SWIVEL button

Swivel

The Swivel Display

Slack

30° 30°

CAUTION

Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand. Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury. Do not swing the unit back and forth. Do not place any fragile objects around the unit. The unit would hit the object(s) during the Swivel operation and

could cause the breakage of the objects and/or the stand.

To operate the Swivel function correctly, place the unit on the stable surface. When you use the unit as wall-mounting, disconnect the stand cable from the unit before installation.

Information

About Swivel terminal connection

To connect the Desktop stand

to the unit.

Connect the designated stand

cable to the Swivel terminal on the rear side of the unit.

POWER SWIVEL

To disconnect the stand from

the unit.

Before detach the stand from

the unit, make sure to disconnect the stand cable

POWER SWIVEL

from the Swivel terminal on the rear side of the unit.

CAUTION

Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.

Page 53

FUNCTION (continued)

Size Switching

Each time button of the remote control is pressed, the screen display size is switched in sequence, and the status will be displayed at the bottom of the screen.

ZOOM button

DTT/TV/AV1~AV3 signal input

Auto Full Zoom C14:9L 14:9Zoom Panoramic

Current Output

Image

(Input Signal)

Display Size To display suitable screen as follows.

Play a image with the suitable format by automatically selecting

Auto

depending on the picture format or programme being broadcast. Default Zoom setting in the Function Menu will be selected if WSS signal or size switching signal is not detected in DTT, TV and AV mode.

(Squeeze)

(Vista)

(14:9 Signal)

(4:3 Signal)

Full

Zoom

C14:9L

14:9Zoom

Panoramic

Play a 4:3 image faithfully in the standard vertical size and horizontally squeezed.

Play a 16:9 image in 4:3 screen (Vista size) faithfully. *In some cases, slight blanking may remain at the top and bottom.

Play a 14:9 image in 16:9 screen, which is expanded vertically and squeezed horizontally. This mode is provided for the broadcasting programme with WSS code-C14:9L.

Play a 14:9 image in 16:9 screen, which is expanded vertically. This mode is provided for the broadcasting programme with WSS code14:9Zoom.

Play a 4:3 image which enlarges horizontal and vertical size of the middle in equal scales, and displays both sides appearing much wider.

Page 54

FUNCTION (continued) Size Switching (continued)

AV4 / AV5 / HDMI1 / HDMI2 signal input

Panoramic 4:3 Full Zoom C14:9L 14:9Zoom

Current Output

Image

(Input Signal)

(4:3 Signal)

(Squeeze)

(Vista)

(14:9 Signal)

Display Size To display suitable screen as follows.

4:3

Panoramic

Full

Zoom

C14:9L

14:9Zoom

Play a 4:3 image on screen faithfully. Blanking occurs on both sides. Play a 4:3 image which enlarges horizontal and vertical size of the

middle in equal scales, and displays both sides appearing much wider.

Play a 4:3 image faithfully in the standard vertical size and horizontally squeezed.

Play a 16:9 image in 4:3 screen (Vista size) faithfully. *In some case, slight blanking may remain at the top and bottom.

Play a 14:9 image in 16:9 screen, which is expanded vertically and squeezed horizontally. This mode is provided for the broadcasting programme with WSS code-C14:9L.

Play a 14:9 image in 16:9 screen, which is expanded vertically. This mode is provided for the broadcasting programme with WSS code14:9Zoom.

ENGLISH

NOTE

The display size in AV4, HDMI1, and HDMI2 is ﬁ xed at Full mode when receiving 1080i or 720p format signal.

Information

Aspect ratio represents horizontal : vertical ratio on screen. For example, vista image is 16:9 in 4:3 image.

9163

16 (or 14 , 21)

Page 55

FUNCTION (continued) Size Switching (continued)

Position Adjustment

Vertical picture position can be adjusted for Panoramic, Zoom, C14:9L, and 14:9 Zoom mode as follows.

1. Press

2. “Position” display will appear.

3. Adjust the position by Adjustment range of each picture size are as shown below.

Panoramic: -12 to+12 (The position cannot be adjusted in Panoramic 2 mode.) Zoom: -31 to+ 31 C14:9L and 14:9 Zoom: -16 to+ 16 *When 1080i/60 component signal is received, it can be adjusted only 0 to +1.

Vertical Size Adjustment at Panoramic Mode

Whilst displaying a picture except RGB input, the panoramic mode can be switched further between Panoramic 1 and Panoramic 2 with button on the remote control. By selecting Panoramic 2, the vertical size is reduced so that you can see the whole image, including any subtitles, that might otherwise not be fully visible on the screen.

NOTE

The function does not work when selecting Auto [Panoramic].

button while operating the picture size display.

button.

Position + 31

Press▲

Position - 31

Press▼

Page 56

FUNCTION (continued)

Size Switching (continued)

CAUTION

Using a wide-screen monitor

This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain

software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices.

Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for

commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.

When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the

peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image reﬂ ecting original intention.

RGB signal input

You can select suitable size depending on the resolution.

Normal Full Zoom1

Zoom3

Zoom2Real

Display Area Selection Diagram

Resolution Full display Circular display

* Real mode gives the image with same shapes as that

of computer monitor.

This mode is only available for VGA(640x480) to

WXGA(1280x768).

ENGLISH

Display Full Normal Real* Zoom1 Zoom2 Zoom3

640 X 480 (VGA)

800 X 600 (SVGA)

1024 X 768 (XGA)

1280 X 1024 (SXGA)

1600 X 1200 (UXGA)

In the signal display chart shown above, some compression or stretching has taken place. Flicker may be noticeable in zoom1~3 modes depending on content. To reduce this ﬂ icker, turn “Vertical Filter” On from “Setup Menu” (29).

Page 57

FUNCTION (continued)

Multi Picture Mode

With this feature, you can watch different channels simultaneously on one screen in several ways. As for the available signals, please refer to "Recommended Signal List" on

• This function is NOT available in HDMI input.

• DTT input: 9700 models only

To activate Multi Picture mode in either DTT, TV, AV, or RGB mode,

press button on the remote control.

2-picture mode

You can watch two different pictures side by side. This mode is available in DTT, TV and AV mode (AV1~5 Input).

Control on the side with Speaker Icon

Audio is output from the selected picture with the speaker icon. You can switch the Input modes (DTT, TV and AV1~5) or change channels only on the side with Speaker icon.

1. To shift the speaker icon, press button.

The speaker icon will be shifted from A to B back-and-forth.

2. To change the channel on the selected picture, press

3. To select the Input mode on the selected picture, press Input Select buttons on

the remote control.

NOTE

In DTT or TV mode, you cannot select the same input channels on both sides

simultaneously. You cannot select the same AV input on both sides simultaneously. The message “Not Available” will be appeared on the screen when the

combinations of the Input modes are not acceptable.

(See the Table below for details.)

button.

The selected picture with speaker icon

Table: Mix-and –Match of the Input Modes

Side B

Side A

DTT/TV ○* ○○○○○ AV1 ○ × ○○○○

DTT/

AV1 AV2 AV3 AV4 AV5

AV15

AV2 ○○× ○○○ AV3 ○○○× ○○ AV4 ○○○○× ○ AV5 ○○○○○×

*You can display TV picture on a side and DTT picture on the other side ; however, you cannot select the same input channels on both sides simultaneously in DTT or TV mode.

Page 58

FUNCTION (continued)

Multi Picture Mode (continued)

2-picture mode (continued)

4. To switch to 4-picture mode, press

The 4-picture mode is displayed on the screen.

button once.

2-4-12

ENGLISH

NOTE

Each time

2-Picture 2-Picture (1080i)* 4-Picture 12-Picture (TV mode only)

When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))

button is pressed, the picture mode will be switched by following order.

2-4-12

AV1 AV2

which sub-screen is displayed inside of the large screen (Main-screen). Please note that you cannot display the picture with component signal on Sub-screen.

5. To EXIT from the Multi Picture mode, press Next time you press

button to activate the Multi Picture mode, it will start from 2-picture mode.

button.

[2-Picture (1080i) Mode]

4-picture mode

You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.

NOTE

The audio comes out ONLY from side A. You can change the channels or change Input modes on the side with ▼ (red triangle) mark.

(Subscreen)

1. To switch the ▼ location

Press button on the remote control.

The ▼ mark will shift to side A and side B back-and -forth.

2. To change the channel

Make sure that ▼mark is located on the side you want to make changes.

Side A: Press

button to select channels.

Side B: Select the frame (B1~B3) that you want to make changes

with button. The characters of selected frame will be highlighted in green.

Press

button to select channels.

3. To change Input mode

Make sure that ▼mark is located on the side you want to make changes.

Side A: Press Input Select buttons on the remote control. Side B: Select the frame (B1~B3) that you want to make changes

with

button. The characters of selected frame will be highlighted in green.

Press Input Select buttons on the remote control.

The selected picture with red triangle mark

B1 8

B2 6

B3 11

Page 59

FUNCTION (continued)

Multi Picture Mode (continued)

4-picture mode (continued)

NOTE

You cannot display the picture with Component signal on Side B screens.

4. To EXIT from Multi Picture mode, press button. Next time you press button to activate the Multi Picture mode, it will start from 4-picture mode.

5. To switch to 12-picture mode, press

The 12-picture mode is displayed on the screen.

12-picture mode

You can check 12 different live broadcast channels on one screen.

The channels that are preset in advance (up to 200 channels) will

automatically appear in certain intervals.

2-4-12

button.

1432

NOTE

5876

This mode is available only in TV mode.

9121110

1. To EXIT from the Multi Picture mode, press Next time you press button to activate the Multi Picture Mode, it will start from 12-picture mode.

2. When you press

button in this sequence, the 2-picture mode will be displayed.

2-4-12

button.

Page 60

FUNCTION (continued)

Multi Picture Mode (continued)

Activate the Multi Picture Mode in RGB Mode

When you activate the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Subscreen is displayed inside of the large screen (Main-screen).

To activate Multi Picture mode, press button on the remote control.

The speaker icon indicates the following.

The audio sounds can be heard on the side with the speaker icon. When the speaker icon is on the Sub-screen

Change channels.

Switch the Input modes (DTT, TV and AV1~5) on the Sub-screen. (Main-screen is only for RGB Input.)

ENGLISH

1. To shift the speaker icon , press button.

Input mode indication

The speaker icon will be displayed in front of the Input mode indication.

Main-screen (upper)

2. To change the DTT/TV channel of the Sub-screen.

Sub screen (lower)

Make sure that mark is located on the Sub-screen.

Press

3. To change the Input mode of the Sub-screen.

+ P

button to select channels.

RGB

AV1

Make sure that the speaker icon is located next to the Input mode

indication of the Sub-screen (lower).

Press Input Select buttons on the remote control.

(AV1~5 are available)

(Subscreen)

4. To change the location of the Sub-screen. Press button. The Sub-screen will move up and down.

5. To exit from the Multi Picture mode, press button.

NOTE

When operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal/Vertical

Sync. Signal (or any kind of Video signal) has not input for certain period of time.

Page 61

FUNCTION (continued)

Picture Freezing

By pressing

button, you can change to freeze mode easily anytime you

2-4-12

like. Press it again to return to normal picture.

FREEZE button

There are two types of freeze mode. You can select these in the “Freeze

Mode” from Function Menu.(

)

Split:

It displays 2 pictures from the same source. One is active (left), while the other is still picture (right). This is very useful in order to avoid missing something or to make a note of something, such as a recipe.

Strobe:

It displays 12 pictures from the same source. 11 of them are still, while the last picture is active. This can be used to check such movement as swinging of golf club or baseball bat.

This function is also available in DTT and AV input mode besides TV mode. Refer to the table as shown in “Recommended Signal List” on 75.

[Split]

[Strobe]

ACTIVE

Page 62

FUNCTION (continued)

Photo Input Function

With this Photo Input function, you can enjoy watching Photos from such devices as Digital Still Camera and SD card along with useful features such as Slide Show with Background Music and Movie picture.

Operating the Photo Input

1. Before operating this function, make sure to turn the power OFF /Standby.

Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.

Digital Still Camera : Set up with reference to the content about

“connecting to PC” in the user’s manual of DSC.

USB Card Reader : Insert only one memory card.

SD Card / MMC : Ensure the card is inserted in the correct direction as

indicated near the slot.

3. Connect the USB cable to the input terminal as shown (Right side), or insert the

SD card /MMC into the slot (Left side).

Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.

ENGLISH

5. Press button on the remote control to activate Photo Input mode.

(Then, turn ON the DSC. Refer to the user’s manual of your DSC for the timing.)

6. Each time button is pressed, you can switch the mode as follows.

Photo Movie Normal Screen

Make sure to turn the power OFF/Standby when disconnecting the DSC / USB

card reader / SD card or MMC from the set.

Left Side

SD MEMORY

CARD

PUSH-EJECT

PH35814

SD Card/MMC

PH35826

INPUT(AV5)

VIDEO S-VIDEO

L/MONO

AUDIO

USB cable

Right Side

CLE-978

Photo Input

button

Digital Camera

USB Card Reader

Rear Panel (Left side and Right side)

NOTE

Do not insert SD Card/MMC and USB cable at the same time. Do not insert anything other than SD Card/MMC into the slot. It could cause malfuction or damage to the slot. Do not allow children to play around the slot.

Page 63

FUNCTION (continued) Photo Input Function (continued)

Displaying Still Picture in Photo Mode

Thumbnail-Size Image (Index) to Full-Size Image

Photo Index (1st Page). Photo Index (2nd Page)

Move to next page.

Photo Index (2nd Page)

Select the file.

No. 23 28/05/03 1600x1200

Full size

File#23 is displayed.

File#24 is displayed.

No. 24 28/05/03 1600x1200

Full size

When you enter the Photo Index mode, the icon appears as the indication. You can also select the preferred ﬁ le in both Thumbnail-size and Full-size image by inputting the ﬁ le directly with

numeric buttons of remote control.

Rotation Function

-ROTATE-

Photo Index (2nd Page). Rotating a thumbnail

image to 90°.

No. 23

28/05/03 1600x1200

-ROTATE-

Each time

Full size

-ROTATE-

button is pressed, the picture is rotated in the sequence of the following.

File#23 is displayed.

Rotating a full size

90° 180° 270° 0°

image to 90°.

Page 64

FUNCTION (continued)

Photo Input Function (continued)

Displaying Still Picture in Photo Mode (continued)

Slide Show Function

SLIDE SHOW

Photo Index (2nd Page)

Select the file.

Slide Show begins.* Slide Show is paused.

No. 23 28/05/03 1600x1200

ENGLISH

OK Start

You can select where to start Slide Show. See “Slide Mode

*You can also start the slide show when displaying the selected full

size image, press SLIDE SHOW button by pressing

”

SLIDE SHOW

the table 1.

button.

If the pause is left for more than a minute, the slide show restarts automatically. If you stop the slide show halfway, the photo index page selects the ﬁ le in which you stopped. You can make speciﬁ c adjustment on “Slide Effect / Slide Interval / Slide Music / Slide Mode” from “Function

Menu (2nd page)”. While operating Photo Input function, you can jump to there by pressing

button. Press it

again to return to the Photo Input page. (Refer to Table 1 as below.)

NOTE

Contrast will decrease automatically to reduce power consumption if stationary images such as still photos are left on the screen for more than 3 minutes. Please note that it is not malfunction.

Table 1. Slide Show Adjustment

Function Menu Selection Description

Select Slide Switching Method.

Slide Effect Off→1→2

Off: No effect 1: Fade In/Out effect 2: Wipe effect

Slide Interval 5Sec.→10Sec.→30Sec. Select preferred interval times.

Slide Music Off→1→2

Slide Mode 1→2

Select the Background Music. Off: No sound. 1: Slow tempo music. 2: Up tempo music.

Select starting point of slide show. 1: Start from the selected ﬁ le. 2: Start from 1st ﬁ le.

Page 65

FUNCTION (continued)

Photo Input Function (continued)

Displaying Movie Picture in Movie Mode

Thumbnail-Size Image (Index) to Full-Size Image:

Photo Index (1st Page). Movie Index (2nd Page). Movie Index (2nd Page)

Movie Index (1st Page).

or*5

Select the file.

Movie starts.

or*1

or *2

Operate the Movie

with remote control

or *3

After completing the

current movie, the

keys or Movie OSD.

*1: Press button or button to display the operation OSD. *2: Press

button in remote control or button (OSD) to exit from the OSD display.

*3: For the Previous button on remote control or OSD, pressing it once starts over the current movie. By

pressing it again within 2 seconds after that, you can return to the previous movie.

*4: When it moves on the unsupported ﬁ le, it automatically returns to the Index. *5:

You can also select the Thumbnail-Size image by inputting ﬁ le # with numeric buttons of remote control.

[Operating the Movie]

You can use the following control key to operate the movie.

Fast-

forward

RGB

Rewind Pause Next Previous Zoom

HDMI1/2

AV5

Remote

Control

OSD

Play

AV3

Stop

AV2

next Movie starts

automatically.

After completing all of the movie files, it

automatically returns

to the Index.

Slow

Play

Exit

The movie OSD contains the ﬁ le information and control keys as below.

The following indications might appear in Movie Operation OSD.

: The movie does not have sound, or this function does not support only the sound of movie. : This function does not support the movie.

With

NOTE

button on the remote control, you can switch the size of movie display between normal and double in full size mode.

In case of displaying movie pictures,

1) If your DSC supports SD card/MMC, insert the card to the unit directly rather than USB.

2) If your DSC is PictBridge-compatible and has a function to switch between PTP and Mass Storage connection, change your setting to Mass Storage and then connect to Photo Input terminal so that it can be available on both Still and Movie pictures. PTP connection can display still pictures but not movie pictures.

If your DSC does not support SD card / MMC or Mass Storage connection, use USB card reader to connect with Photo Input terminal. Please note that we do not guarantee all DSC can make either or both Mass Storage and USB card reader connection.

Comparing to movie pictures through SD card/MMC, the movie pictures using USB might have lower

performance such as dropping frames.

Page 66

FUNCTION (continued)

Photo Input Function (continued)

Other

You can select the background pattern on “Background” from “Function Menu.”

Function Menu Selection Description

Select preferred background pattern.

Background 1→2

Press

The ﬁ le information is displayed by pressing

Thumbnail-Size Image Full-Size Image (Still) Full-Size Image (Movie)

button whenever you want to return from full size image to index.

button.

1: Striped texture of grey 2: Green checked pattern

To exit from Photo Input…

You can exit from Photo Input when… Pressing button in Photo Index mode, or Pressing button in Movie mode (Index and full).

ENGLISH

* The size of the image depends

on the resolution for the image.

OSD Information

Operation Message Accessing “Loading...” * Loading Files “Loading...” * Normal no message Not insert USB/SD/MMC “! No Connection” Not available format “! No Connection” Abnormal “! No Connection” No File “! No File”

*The message “Loading...” starts to blink automatically if it is displayed on the screen more than 5 seconds.

Speciﬁ cation

Digital Still Camera corresponding to DCF standard.

Application

Photo

Movie

USB Card Reader with the memory containing pictures had taken by camera.

SD card/MMC card containing picture had taken by camera. Max number of photo ﬁ le 500 Max number of pixel 8176 x 8176(DCF JPEG format) Max number of movie ﬁ le 500

Supported Video Format (Extension/Max number of pixel)

Supported Audio Format

Motion JPEG (avi.mov/640*480) MPEG1 (mpg/640*480) MPEG4 (avi,mov,mp4,asf/352*288) PCM (Incompressible format) ADPCM G.726 μ-LAW PCM MPEG1-LayerII

Page 67

FUNCTION (continued)

Photo Input Function (continued)

CAUTION

In case of copying, viewing or editing a picture by computers, etc., it may not be displayed in this function. Do not connect any apparatus other than DSC, USB card reader, and SD card/MMC to the Photo Input

connector. It causes the malfunction.

Do not connect a DSC and USB card reader with USB HUB. Pictures may not be displayed correctly, or it causes

a malfunction.

Insert only one memory card even though the USB card reader has multiple slots for memory card. Pictures in

multiple memories cannot be seen at the same time. Certain types of DSC, card readers, or SD card/MMC may not work with this Photo Input function. DSC with low battery power may not properly display photos in this function. Response time might vary depending on each image contents when switching pages, loading ﬁ les, and playing

each movie. Contrast will decrease automatically if stationary images such as still photos are left on the screen for more than

3 minutes. The OSD message “! No Connection” is displayed in case of the incomplete connection with USB cable or SD

card / MMC and connection to a digital still camera or USB card reader without the memory card. The menu items other than “Picture,” “Function,” and “Audio” are not available, which are shown in grey. The functions of the multi picture, CH selection, freeze mode, aspect, mode display, and so on are not available. Whilst displaying still/moving images, blinking LED which indicates the access of DSC / USB card reader /SD

card/ MMC, or displaying “Loading...”, do not turn the power off/standby mode nor remove/insert USB cable and

memory card. The picture may not be displayed correctly, depending on the connecting device in case of extending the USB

cable. PictBridge-compatible DSC can be connected to Photo Input terminal through PTP transfer, which supports still

pictures but not movie pictures. Refer to the DSC user’s manual for PictBridge in details. Do not use this function other than private purposes. It might infringe copyright laws. Back up all of the data in the memory card in case if data was lost due to unexpected accident. We do not

assume any liability for the losses by misuse or malfunction.

Page 68

FUNCTION (continued)

Audio Switching

NICAM / Sound Multiplex(including A2) (TV mode)

You can make optimum use of available audio by pressing if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when only mono sound is received. These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.

Bilingual/Dual Sound broadcast

Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary on a game as primary sound, and a commentary about a team as the secondary. When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM signals, NICAM display will appear.

Each time button is pressed, the display is switched in the sequence of following.

button of remote control. Audio can be switched only

ENGLISH

Sound multiplex signal received

[ ]

NICAM signal received

NICAM[ ] NICAM[ ]

[I]…Main language/Primary Sound [II]...Sub language/Secondary Sound

▼…force mono: This selects main language or primary sound.

Yellow

Yellow Green

[ ]

Yellow Green

Stereo broadcast

With stereo broadcast, you can enjoy different sound from either side. When a stereo program is received, sound mode display will appear in red as shown. Also, when receiving NICAM signals, NICAM display will appear.

Press button to switch between stereo and mono sound.

Sound multiplex signal received

Red Green

NICAM signal received

NICAM

...Stereo

.....Force Mono

NOTE

Red Green

Please select ▼(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that

you can receive a clear mono sound.

▽ represents the Mono broadcast.

Page 69

FUNCTION (continued)

Power Save Mode

When AV input is selected

You are provided with the function to save power consumption when no signal is detected in AV input. Set to On in

“Video Power Save” from Function Menu, which leads to the power save mode in AV4 /HDMI1 /HDMI2 and the

Standby mode in other AV input. (Please see the table below for details)

Refer to

about “Video Power Save”

When no signal is detected

Condition Indicating Lamp

AV4,HDMI1, 2 Power Save Orange Turns On automatically.

AV1, 2, 3, 5 Standby Red Remains as Standby mode.

When signal is input during

On in “Video Power Save”

When the RGB input is selected

When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set

to be activated automatically when the computer is not being used to reduce power consumption by this unit.

RGB sync signal

PC signal Active (normal display) Blank (no display)

Operation mode On Off

Indicating lamp Lights green Lights orange

Horizontal Yes No Yes No

Vertical Yes Yes No No

Returning to operating status

Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button of

the remote control.

Page 70

FUNCTION (continued)

Recall

button

DVD Player / STB Selection

You can use this remote control to operate DVD Player and Set Top Box of other makers as well as this set. After pressing buttons to select the maker and type as shown below.

Set up hint

Example: HITACHI DVD

②

1. Set up the maker.

Press LED is blinking (Approx. 30 Seconds), press + and ① buttons.

button to indicate the DVD LED on the remote control. While the DVD

2. Set up the maker type.

Release the ① button while keeping + button depressed. Then press ② button.

3. Conﬁ rm the setting.

After setting the maker and type, press the SUB POWER button on the remote control. If the DVD does not switch ON, repeat step 1 and 2 using other maker types as listed.

<“DVD” Selection>

Makers of DVD Player

HITACHI

FUNAI

Pioneer

Panasonic

TOSHIBA

Philips

JVC

SAMSUNG

Sony

Sharp

Set Maker Set type

RCA

Mitsubishi

ONKYO

ZENITH

THOMSON

SHINCO

SKYWORTH

BUBUKO

DENON

button, press (or hold) the required

Makers of DVD Player

2-4-12

YAMAHA

Function Select

button

Set Maker Set type

RED

GREEN

YELLOW

BLUE

ENGLISH

<“SAT” Selection>

Makers of STB Player

HITACHI

TOSHIBA

DGTEC

Panasonic

NOTE

Please note that not all models of the listed makers can be operated using this remote control.

Set Maker Set type

Page 71

TROUBLESHOOTING

Before calling service technician, check the following tables ﬁ rst. If the problem is not be solved with the suggested procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.

When Following Messages Appear on the Screen

Message Condition / Action Page

Power Save

No Sync. Signal

Invalid Scan Freq.

Not Available This shows when the selected operation is not available.

Check Antenna Check the connection status when this message appears.

Auto Adjusting This indicates that it is in the process of auto adjusting. (in RGB mode)

No Signal

Scrambled channel

This indicates it is in Power Save mode. (in AV/RGB mode) The indicating lamp lights in orange.

The unit cannot detect any signals from any input terminals.

Check if the cable is connected correctly and ﬁ rmly. Check if the power of any external equipment is ON. Check if the input selection matches the connection terminal. Check if the PC is in Power Save mode or not.

The unit receives unsupported signals.

Check if the cable is connected correctly and ﬁ rmly. Check if the input signal is compatible with the speciﬁ cation of the television.

Check aerial lead if it is disconnected / damaged / misaligned. Check with your dealer if it is out of signal area or not. (in DTT mode)

Check if the common interface module inserted correctly. (in DTT mode)

Symptom and Check List

Symptoms Check list Page

Check the Indicating lamp status (Off, Red, Green, or Orange). Check the connection of the Power Cord and/or other cables.

No picture - no sound

Check if the Main Power of the unit or external equipments is ON. Check if the TV mode is selected. Check if the TV is in “Standby mode” or “Power Save mode”. Adjust the values in “Picture menu” and “Audio menu”.

14 28

25,

Snowy picture-poor sound

Multiple images-normal sound

Intermittent interference

Normal picture, but no sound

No picture - normal sound

The remote control does not work.

Normal picture but no colour-normal sound

Check the antenna connection and direction. The TV station may have broadcast difﬁ culties.

Try another channel.

Check the antenna connection and direction. Fine tuning the TV. Check the connection of the external equipments. The TV station may have broadcast difﬁ culties.Try another channel.

Check if the source of interference is shielded well. Remove those kinds of electrical devices away from the TV.

Check the volume level. Check if the Make sure that the headphone is NOT connected. Check the connection of the external equipments.

Check the value level of “Brightness”, “Contrast” and “Back

Light” in “Picture Menu”.

Check if the batteries are installed correctly. The batteries might be exhausted. Replace them with new ones. Remove all the obstructions in front of the sensor window on the unit. Check if you select the correct function by button on the

remote control

Check if the buttons of the control panel can work. Check the connection of the external equipments.

Check the “Colour System” in “Setup Menu”.

button has been pressed or not.

14, 25

Page 72

TROUBLESHOOTING (continued)

Symptom and Check List (continued)

Symptoms Check list Page

No picture

The Indicating lamp → Off

No picture

The Indicating lamp → Orange

It means that the unit is in “Power Save

mode”.

Check if the Power Cord is plugged into the socket ﬁ rmly. Check if the Main Power is ON.

Check if all the cables of the external equipments are connected

correctly and ﬁ rmly. Check if the power of the external equipments is ON. Check if the TV/AV mode has been selected correctly. Check if the PC is in Power Save mode or not. Refer to “Power Save mode” and “When following messages appears on

the screen”.

ENGLISH

No picture

The indicating lamp → Green

The top of the unit and surface of the

panel heat up.

Image cannot be displayed in the correct

position.

When the VCR is in special playback

features (Fast Forward or Rewind), the screen gets dark and cannot see the image at all.

The images are not displayed on sub

pictures in “Multi Picture mode”

Screen display size cannot be switched

correctly.

Cannot be displayed the image from

HDMI 1 or 2.

Check if the signal cable is connected correctly and ﬁ rmly. Adjust the level of Brightness, Contrast and Back Light lower.

It may happen when you use the unit for long hours. Turn off the Main

Power of the unit for a while. Please note that this is not malfunction.

Press

compatible with the speciﬁ cation of the television.

It could happen when the VCR is connected to Component output, such

as 480i. This is not malfunction.

Try Composite output or S-video output and check the picture again.

There are some combinations of input signals that the images are not

displayed on sub pictures.

Please check the Table of “2-Picture” and “4-picture/2-picture(1080i)” for details.

The display size is ﬁ xed at “FULL” when the receiving signals are

1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. Check the signal status by pressing the

control. Check if the cables are connected correctly.

Check the output format of the equipments. (Please refer to “Connecting Procedure” and “Recommended Signal

List”.)

button to check if the input signal of the displayed image is

button on the remote

73,

Page 73

TROUBLESHOOTING (continued)

Symptom and Check List (continued)

Symptoms Check list

Cannot display the image from “Photo Input function”.

The image on the screen is moving in

an oblique direction.

(RGB input mode only)

The coarse horizontal stripes could be

seen in full-display mode.

(RGB input mode only)

The part of the image is lacking.

The horizontal stripes are moving

vertically with ﬂ ickering screen.

(RGB input mode only)

When the characters are displayed

on the whole screen, the vertical stripes appear and some of the characters are blurred.

ABCDEFGHIJ abcdefgABCDEFGabcd

(RGB input mode only)

AAAAA

Check the connecting equipments and image format.

(Please refer to “Photo Input function”.)

Adjust “Horizontal Clock” and “Clock Phase”.

Adjust “Horizontal Clock”.

Try “Auto Adjust”. (RGB input mode only)

Check the Signal status of the PC by pressing

button

on the remote control.

If the Vertical Frequency of the PC is set to less than 85Hz,

adjust its level higher (up to 85Hz).

Set “Vertical Filter” to ON. (Please note that you will have lower vertical resolution with this action.)

Try “Auto Adjust”.

If the display condition is not improved with Auto Adjust,

adjust “Horizontal Clock”.

Page

61, 65

When the letter string is displayed in

full-screen, all of the characters on the screen are blurred.

ABCDEFGHIJ

abcdefgABCDEFGabcd

ABCDEFGHIJ

abcdefgABCDEFGabcd

(RGB input mode only)

When the small patterns are

displayed on the screen, the entire screen is ﬂ ickering.

(RGB input mode only)

The thickness of the letters, lines, etc is not displayed

evenly.

(RGB input mode only)

No Picture or sound is output.

(DTT mode only)

Forgotten channel lock code.

(DTT mode only)

Forgotten menu lock code.

(DTT mode only)

Due to the bad reception, block noise interferes during

DTT mode.

(DTT mode only)

Try “Auto Adjust”.

If the condition is not improved with Auto Adjust, adjust

“Clock Phase” till you get clearest image.

Try “Auto Adjust”.

If the condition is not improved with Auto Adjust, adjust

“Clock Phase” till you get ﬂ icker-free display.

It could happen when the image with more than 768 lines

of vertical resolution is displayed.

Please note this is not malfunction.

It might occur because it is tuned to digital teletext channel.

Return to another channel.

Re-install channel to cancel channel lock.

Contact the customer service listed on the rear page.

Check the aerial system to improve signal quality.

Page 74

PRODUCT SPECIFICATIONS

SPECIFICATION

Panel

Net dimensions

Net weight

Ambient conditions

Display dimensions

Resolution 1366 (H) x 768 (V) pixels 1366 (H) x 768 (V) pixels

Temperature Operating : 5°C to 35°C, Storage : 0°C to 40°C Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

Power supply Power consumption/ at standby

Audio output speaker total 20W speaker total 20W (VIDEO input)

Input terminals

Approx. 32 inches (698 (H) x 392 (V) mm, diagonal 801mm)

including Stand: 813(W)x663(H)x350(D) mm excluding Stand: 813(W)x584(H)x114(D) mm

including Stand: 28.0kg excluding Stand: 22.3kg

AC220 - 240V, 50Hz 163W/<1W 195W/<1W

AV1 : composite video input terminal (SCART)

S video input terminal (SCART) L/R audio input terminal (SCART)

AV2•3 : composite video input terminal (SCART)

RGB video input terminal (SCART) L/R audio input terminal (SCART)

AV4 : composite video input terminal (RCA)

component video input terminal.(RCA) L/R audio input terminal (RCA)

AV5 : composite video input terminal (RCA)

S video input terminal (Mini DIN)

L/R audio input terminal (RCA) HDMI 1•2 : HDMI input terminal Audio input terminal (3.5mm Stereo Mini Jack) Photo Input : Photo Input terminal / SD card slot

Approx. 37 inches (820 (H) x 461 (V) mm, diagonal 941mm)

including Stand: 940(W)x736(H)x350(D) mm excluding Stand: 940(W)x657(H)x119(D) mm

including Stand: 32.5kg excluding Stand: 26.8kg

ENGLISH

Input signals

Output Signal

(RF input) Input terminal / Receiving range ANT : 75Ω Unbalanced / 44~870MHz

RF Video System

(RGB input)

Input terminals

Input signals 0.7 V/1.0 Vp-p, analogue RGB (Recommended Signal)

Sync signals

The unit takes at least 30 minutes to attain the status of optimal picture quality. The SECAM D, K system might not be normally received, depending on the model. The DVB-T system is available only for 9700 models.

Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60 Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60

OUTPUT (MONITOR): composite video monitor-output terminal (RCA) OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA) OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin) OUTPUT (SUB-WOOFER): Woofer output terminal AV1 : composite video output terminal (SCART)

L/R audio output terminal (SCART) AV2•3 : composite video output terminal (SCART)

L/R audio output terminal (SCART)

PAL B, G, H / I / D, K SECAM B, G / K1 / L, L' / (D,K) DVB-T*

Analogue RGB input terminal (D-sub 15-pin) Audio input terminal (3.5mm Stereo Mini Jack)

H/V separate, TTL level [2KΩ] H/V composite, TTL level [2KΩ] Sync on green, 0.3 Vp-p [75Ω]

Page 75

PRODUCT SPECIFICATIONS (continued)

Signal Input

RGB terminal (D-sub 15-pin connector)

Pin Input signal

1R 2 G or sync on green 3B 4 No connection 5 No connection 6 R.GND 7 G.GND 8 B.GND 9 No connection

10 GND

11 No connection 12 [SDA] 13 H. sync or H/V composite sync 14 V.sync. [V.CLK] 15 [SCL]

When different kinds of input signals are

simultaneously input to the unit via a graphics board, etc., the unit will automatically select the signals in the following priority order:

* Even in the case of the recommended signals shown

on the following page, there may be instances when correct display is not possible. In this case, use H/V separate sync, H/V composite sync.

Sync signal type Priority

H/V separate sync. 1

H/V composite sync. 2

sync.on Green * 3

S-input connector pi n spec i ﬁ cations

Pin Input signal

1Y 2 Y-GND 3C 4 C-GND

Frame GND

Photo-inp u t con n ecto r pi n s pec iﬁ cat i on s

Pin Input signal

15V 2DM 3DP 4 GND

HDMI connector pin speciﬁ cations

Pin Input signal Pin Input signal

1 TMDS Data2+ 11 TMDS Clock Shield 2 TMDS Data2 Shield 12 TMDS Clock3 TMDS Data2- 13 CEC 4 TMDS Data 1+ 14 Reserved(N.C. on device) 5 TMDS Data1 Shield 15 SCL 6 TMDS Data1- 16 SDA 7 TMDS Data0+ 17 DDC/CED Ground 8 TMDS Data0 Shield 18 +5V Power 9 TMDS Data0- 19 Hot Plug Detect

10 TMDS Clock+

SCART connector pin speciﬁ cations

Pin Input signal Pin Input signal

1 AUDIO OUT (RIGHT) 12 Not Used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT / MONO) 14 GND 4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN 5 RGB-B GND 16 BLANKING SIGNAL 6 AUDIO IN (LEFT / MONO) 17 COMPOSITE VIDEO GND 7 RGB-B IN 18 BLANKING SIGNAL GND 8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT 9 RGB-G GND 20

10 Not Used 21 GND / SHIELD (CHASSIS)

11 RGB-G IN

COMPOSITE VIDEO / S.VHS LUMINANCE IN

Page 76

PRODUCT SPECIFICATIONS (continued)

Recommended Signal List

With HDMI input

Signal mode

No.

Signal

Name

1 VGA 640 X 480 59.94 31.47 25.18 EIA-861B 2 576i 3 480i 4 576p 720 X 576 50.00 31.25 27.00 EIA-861B 5 480p 720 X 480 59.94 31.47 27.00 EIA-861B 6 1080i/50 1920 X 1080 50.00 28.13 74.25 EIA-861B 7 1080i/60 1920 X 1080 60.00 33.75 74.25 EIA-861B 8 720p/50 1280 X 720 50.00 37.50 74.25 EIA-861B 9 720p/60 1280 X 720 60.00 45.00 74.25 EIA-861B

Resolution

720(1440) X 576 720(1440) X 480

Vertical

frequency (Hz)

50.00 15.63 27.00 EIA-861B

59.94 15.73 27.00 EIA-861B

With RGB input

Signal mode

No.

10 800 X 600 75.00 46.88 49.50

11 800 X 600 85.06 53.67 56.25 12 1024 X 768 60.00 48.36 65.00 13 1024 X 768 70.07 56.48 75.00 14 1024 X 768 75.03 60.02 78.75 15 1024 X 768 85.00 68.68 94.50 16 1152 X 864 75.00 67.50 108.00 17 1280 X 1024 60.02 63.98 108.00 18 1280 X 1024 75.03 79.98 135.00 19 1280 X 1024 85.02 91.15 157.50 20 1600 X 1200 60.00 75.00 162.00 21 1600 X 1200 75.00 93.75 202.50 22 1600 X 1200 85.00 106.25 229.50 23 24 832 X 624 74.55 49.72 57.28 25 1024 X 768 74.93 60.24 80.00 26 1152 X 870 75.06 68.68 100.00 27 28 1280 X 768 69.997 56.137 94.760 29 30 1366 X 768 60.015 47.712 85.50

The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position, Vertical Position,

Signal

Name

1 2 640 X 480 59.94 31.47 25.18 3 W-VGA 864 X 480 59.94 31.47 34.24 WVGA type : On 4 5 640 X 480 75.00 37.50 31.50 6 640 X 480 85.01 43.27 36.00 7 800 X 600 56.25 35.16 36.00 8 800 X 600 60.32 37.88 40.00 9 800 X 600 72.19 48.08 50.00

VGA

VESA

Macintosh

W-XGA

Resolution

640 X 400 70.08 31.47 25.18

640 X 480 72.81 37.86 31.50

640 X 480 66.67 35.00 30.24

1280 X 768 59.833 47.986 81.00

1280 X 768 59.876 47.776 79.50

Horizontal Clock and Clock Phase. The unit may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it. The unit differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same signal. Displaying images with more than 768 lines of vertical resolution at Full display (compressed display) can result in the interpolation of stripes.

Vertical

frequency (Hz)

Horizontal frequency

(kHz)

Horizontal frequency

(kHz)

Dot clock

frequency

(MHz)

Dot clock

frequency

(MHz)

Remarks

WXGA Mode : 1280x768 WXGA Mode : 1366x768

ENGLISH

Page 77

PRODUCT SPECIFICATION (continued)

Recommended Signal List (continued)

With Multi Picture Function

2-Picture / (1080i)*

Input terminal AV1~AV5 AV2, AV3 AV4

Main

DTT

AV1

~AV5

A V2, A V3 RGB

AV4

PAL, SECAM

NTSC3.58/4.43

576i, 576p 480i, 480p

720p/50, 60

1080i/50, 60*

Sub

DTT TV

PAL

SECAM

○○ ○ ○ ○○ ○ ○ ○ ○○○○○○○○○ ○○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○

NTSC3.58 NTSC4.43

RGB

576i

576p

480i

480p

720p/50 720p/60

1080i/50 1080i/60

TELE TEXT

(○ : Available)

4-Picture

Input terminal AV1~AV5 AV2, AV3 AV4

Main

DTT

AV1

~AV5

A V2, A V3 RGB

AV4

PAL, SECAM

NTSC3.58/4.43

576i, 576p 480i, 480p

1080i/50, 60

720p/50, 60

Sub

DTT TV

PAL

SECAM

○○ ○ ○ ○○○○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○ ○○ ○ ○ ○

NTSC3.58 NTSC4.43

RGB

576i

576p

480i

480p

720p/50 720p/60

With Picture Freezing Function

Split Strobe

DTT

PAL, SECAM

NTSC3.58/4.43

576i

480i 576p 480p

720p/50, 60

1080i/50, 60

HDMI

RGB(AV2, 3)

RGB(PC)

○○ ○○ ○○ ○○ ○○ ○○ ○ ○ ○ ○

○

(○ : Available)

1080i/50 1080i/60

TELE TEXT

(○ : Available)

Page 78

Thank you for purchasing this Hitachi Television.

In the unlikely event that this product should develop a fault, we undertake to

repair or replace any part of the product which fails due to a manufacturing

defect within 12 months of the date of purchase provided that ...

1. the product has been installed and used only in accordance with the instructions supplied with the product.

2. the product has not been repaired, maintained, or modified by any person other than a Hitachi authorized dealer.

3. the product serial number has not been removed or altered.

•This guarantee does not apply to a product acquired second hand or for commercial or communal use.

•This guarantee does not cover the replacement of exhausted batteries, the adjustment of user controls, or aerial alignment.

•Any parts replaced under this guarantee shall become the property of HITACHI EUROPE LTD.

•Please note that evidence of the date of purchase will be required before any service under this guarantee is carried out.

ENGLISH

Use the boxes provided below to record your TV’s Model and Serial Number - these

are found on the rating plate located on the rear of the LCD panel. Also, record where

and when you purchased this TV. This information will help any future queries you may

have and should be used in all correspondence with Hitachi service centres.

MODEL

SERIAL NUMBER DEALER/STORE DATE PURCHASED

This guarantee does not affect your statutory rights.

In all cases of difficulty,

please consult your Hitachi dealer.

Page 79