Hitachi 24VZC5200 User Manual

24” FHD LED LCD

TV/DVD COMBO

OWNER’S GUIDE

For Model: 24VZC5200

Welcome

Congratulations on choosing to buy a HITACHI product. All products
brought to you by HITACHI are manufactured to the highest standards of
performance and safety and, as part of our philosophy of customer service
and satisfaction, are backed by our comprehensive 2 Year Warranty.

We hope you will enjoy using your purchase for many years to come.

After Sales Support

Telephone: [phone]
Email: [e-mail]

3

Contents

Welcome 3

Remote Control 5

Important Safety Instructions 9

Installation 14

Controls and Connections 17

Getting Started 23

Basic Operations 24

Electronic Program Guide (EPG) 26

Recording 27

Menu Settings 30

DVD Mode 41

USB Multimedia Playback 50

FAQs 53

Other Useful Information 55

4

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Remote Control

1 POWER: Set the unit in standby mode;

press it again to switch it on.

2 GOTO: Jump to a different chapter of

the DVD.

3 ANGLE: View DVD playback from

different angles, if the DVD has this
feature.

4 REPEAT: Repeat a different chapter/

title or the entire DVD.

5 FAV: Press to display your favourite

program in DTV mode.

6 TEXT: Switch between TV and Teletext

mode.*

7 SUBTITLE: Enable/disable subtitles.
8 SIZE / ZOOM: Change the picture size.
9 MEDIA: Select USB mode.
10 : PLAY/PAUSE in TIMESHIFT and

USB mode.

11 Record: Record programs in DTV

mode.

D-SETUP: Display the main disc menu.
12 : Stop playing.
13 MENU: Display the main TV menu.

14 / / / : Press the UP/DOWN/

RIGHT/LEFT buttons to navigate

the on-screen menus and adjust the

system settings to your preference.

Press OK to confirm your selection.

15 SOURCE: Switch the input source.
16 VOL +/-: Turn the volume up/down.
17 NUMBER BUTTONS (0-9): Press

to select a TV channel directly when

watching TV. The channel changes

after 2 seconds.

18 -/--: Switch the digits.
19 LANG/AUDIO: Switch the available

sound-track language (DTV/DVD).

20 P-MODE: Cycle through the different

picture modes.

21 S-MODE: Cycle through the different

sound modes.

10
11
12
13

14

15

16

17

18

19

3 4

1

2

5
6

7
8
9

CLE-1018B

38

37

36
35

34
33
32

31
30

29
28

27

26
25

24

23

22

21
20

After Sales Support

Telephone: [phone]
Email: [e-mail]

5

Remote Control (Cont.)

3 4

22 : Return to the previous channel.

1

2

5
6

7
8
9

10
11
12
13

14

15

16

17

18

19

CLE-1018B

6

23 DISPLAY: Display information of the

38

37

36
35

34
33
32

31
30

29
28

27

current program.

24 CH+/-: Press to play the next or previous

channel; press repeatedly to scan
through the channels.

25 MUTE: Mute the sound. Press again or

press V+ to restore the sound.

26 EPG: Launch the Electronic Program

Guide (DTV)

D.MENU: Display the main disc menu.
27 OK: Confirm selection.
28 EXIT: Exit from the main TV menu

displayed on the screen.

TITLE: Display the DVD title menu (DVD).
29 : Play the previous file.
30 : Play next file.
31 : Move fast backward.
32 : Move fast forward.

26

33 ASPECT: Press to zoom in and out of

25

the picture.

34 SUBPAGE: Manually jump to the

24

previous or next subpage of Teletext.

35 FREEZE: Hold the picture.
36 SLEEP: Set the TV sleep timer.

23

37 A-B: Repeat DVD scenes of your

preference.

38 TV / RADIO: Switch the unit between TV

and radio.

(DVD).

* Teletext or Austext is no longer available, nor

22

is there any plan for a replacement teletext

21
20

service in Australia. For more information,
please visit the websites of the Australian
channel providers.

However, one teletext option, “closed

captions”, is still working on most Australian
television channels. This service allows you
to activate subtitles while watching normal
television programs that provide it.

: Open or close the disc compartment

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Remote Control (Cont.)

Using the Remote Control

Inserting Batteries

Install the batteries as illustrated in Fig. 1, right.

• Open the cover at the back of the remote control unit
completely.

• Insert two AAA size batteries according to the polarity
markings (+ / -) inside the compartment. Make sure
the batteries are correctly aligned and properly
pushed into place so they can power the remote
control unit.

• Slide the cover back into position.

NOTE: When testing the remote control unit after

replacing the batteries, make sure the TV is
properly connected to the mains power supply.

Push

Open

Battery Service Life

• The service life of batteries depends on usage and

Press

environmental conditions. They should normally last
for about one year.

• If the remote control fails to work even when it is
operated near the TV, replace the batteries.

Precautions When Using Batteries

• Do not use old and new batteries together.

• Do not use different types of batteries (for example, Manganese and
Alkaline batteries) together.

• Note that there are chargeable and non-chargeable batteries. Do not
attempt to charge non-chargeable batteries.

• Remove the batteries from the remote control unit if you do not intend to
use the unit for a long time.

• When discarding used batteries, follow any guidelines for recycling and
disposal of batteries that apply in your local area.

• Keep batteries away from children and pets.

• Never throw batteries into a fire or expose them to fire or other sources of
extreme heat.

After Sales Support

Telephone: [phone]
Email: [e-mail]

7

Remote Control (Cont.)

Remote Control

Using the Remote Control

To use the remote control, point it towards the
remote sensor at the front of the television.

The remote control has a range of up to
approximately six metres (6m) from the TV at an
angle of up to 30 degrees each to the right and
left of the sensor, as illustrated on the right.

The remote control will not operate if its path is
blocked.

NOTES:

• Do not drop, step on or otherwise impact the
remote control. This may damage the parts or
lead to malfunction.

• The operating distance may vary according to
the brightness of the room.

• Do not point bright lights at the remote control
sensor.

• Do not place objects between the remote
control and the remote control sensor.

• Do not use this remote control while
simultaneously operating a remote control of
other devices.

Sensor

CLE-1018B

8

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Important Safety Instructions

Read this manual thoroughly before first use and keep it in a safe place for future
reference, along with purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Follow all instructions and take notice of all the warnings.

IMPORTANT WARNINGS AND CAUTIONS!

The lightning flash with an arrowhead
symbol within an equilateral triangle is
intended to alert you to the presence
of non-insulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

The exclamation point within an

To reduce the risk of electric shock, do not remove

the cover (or back).

This unit contains no user-serviceable parts inside.

Refer all servicing to qualified service personnel only.

IMPORTANT WARNINGS AND CAUTIONS!

• Only connect this TV to a mains socket with a protective earthing connection.

• To prevent damage which may result in fire or an electric shock hazard, do not
expose this appliance to rain or moisture.

• Do not change or modify the appliance in any way.

• Only use the attachments/accessories specified by the manufacturer.

equilateral triangle is intended
to alert you to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.

This set employs an optical laser beam system in the disc mechanism
designed with built-in safeguards. Do not attempt to disassemble.

LASER SAFETY

Exposure to this invisible laser light beam may be harmful to the
human eye.

This is a Class-1 laser product. Use of controls, adjustments or
procedures other than those specified herein may result in hazardous
laser light beam exposure.

This TV set with DVD player should not be adjusted or repaired by
anyone except qualified service personnel. The laser mechanism in the
set corresponds to the stylus (needle) of a record player. Although this
product uses a laser pick-up lens, it is completely safe when operated
according to directions.

After Sales Support

Telephone: [phone]
Email: [e-mail]

9

Important Safety Instructions (Cont.)

Electrical Safety and Cord Handling

• Voltage: Before installing this TV set, make sure your outlet voltage corresponds to

the voltage stated on the TV’s rating label.

• Protect from moisture: To reduce the risk of fire or electric shock, do not expose
this TV to rain or moisture; do not use it anywhere near water; do not touch the
power plug with wet hands.

• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so may
cause an electric shock.

• Power outlet: Do not plug several devices into the same outlet. Doing so may
cause the outlet to overheat and start a fire. Make sure the outlet is properly earthed
and readily accessible during operation of the equipment.

• Power plug: Make sure the plug is properly installed before inserting it fully into the
outlet. A loose or improperly inserted power plug may cause a fire. The mains plug
is used as the power disconnect device and shall remain readily accessible and
operable.

• Protect the cord: Do not bend, twist or kink the power cord excessively. Do not
allow anything to rest on or roll over the power cord and antenna cable. Doing
so may cause a fire or an electric shock. Do not run the power cord near heat­producing appliances such as radiators, stoves or irons. The excessive heat could
melt the insulation and expose live wires, resulting in fire or electric shock.

• Disconnect: Always grasp the plug when disconnecting the power cord. Pulling the
cord can damage the internal wire and may cause a fire.

• Disconnect device: Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily operable.

• Lightning storms: Unplug the power cord and antenna cord during lightning storms
or when unused for long periods of time. Not doing so may result in fire or electric
shock. Before thunder and lightning storm events arrive, unplug to minimise the risk
of damage to your TV.

10

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Important Safety Instructions (Cont.)

Installation

• Follow instructions: Only install this TV set in accordance with these instructions.

• Location: This TV is designed for indoor, fixed location use only. It must not be used

in portable or mobile applications as vibration or excessive forces may damage the
unit.

• When deciding on where to put the TV set, make sure the place is:

• Well ventilated, and away from damp and cold.

• Protected from overheating and away from direct sunlight. (Total darkness or a
reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.)

• Away from moisture drips or splashes.

• Protected from excessive dust or grease.

• This TV is equipped with standard wall-mounting points, and we recommend that

a wall bracket should be installed between the TV and the wall to prevent the
TV from falling from a cabinet. (The bracket is not included.)

• If a television is not positioned in a sufficiently stable location, it can be potentially
hazardous due to falling and causing injury, particularly to children. To prevent

injuries from your television falling, take a few simple precautions:

• Do not place the TV on tall furniture (e.g., on a cupboard or bookcase) without
anchoring both the furniture and the TV to a suitable support.

• Only use furniture that can safely support the television.

• Ensure the TV is not overhanging the edge of the supporting furniture.

• Educate children about the dangers of climbing on furniture to reach TV
controls.

• Do not place the TV on cloth or other materials.

• Bookcase: Do not install this equipment in a confined space such as a bookcase or
similar unit.

• Heat: Do not install the TV set near heat sources such as radiators, stoves or other
audio visual equipment (including amplifiers) that produce heat.

• Environments: This TV is not warranted for use in unreasonably hot, cold or humid
environments.

• Antenna: Install the antenna away from high-voltage power lines and communication
cables. Make sure it is installed securely. If the antenna touches a power line, contact
with the antenna could result in fire, electric shock or serious injury.

• Vibration: Do not expose the TV to vibration or shock.

• Ventilation: Install the unit at an adequate distance from the wall to ensure sufficient

ventilation. Leave at least 10cm clear space around the TV, and 30cm from the top
of the TV. If the temperature inside the unit rises, it may result in fire. Do not cover
the ventilation openings with items such as newspapers, tablecloths, curtains etc.
as this could impede ventilation.

After Sales Support

Telephone: [phone]
Email: [e-mail]

11

Important Safety Instructions (Cont.)

Usage Conditions and Restrictions

• Adjustments: Follow the instructions in this manual when installing and adjusting

the TV set. Only adjust those controls that are covered in this manual, as improper
adjustment of other controls may result in damage.

• Do not modify: Do not change or modify the appliance in any way.

• Attachments: Only use the attachments/accessories specified in this manual.

• Cabinet slots: Do not insert objects of any kind into this unit through the cabinet

slots, as they could touch the current-carrying parts or short-circuit parts, resulting
in fire, electric shock or damage to the unit.

• Smoke or odour: If you notice any unusual odours or smoke around the unit,
immediately disconnect the unit from the outlet and contact the service centre.
Failure to do so may result in fire or electric shock.

• Water: Do not place containers with liquids (such as vases) or with small metallic
objects on top of the unit. If liquid enters the unit or any metal object falls into the
unit, it may result in short-circuit, fire or electric shock.

• Fire or explosion: Do not use or store flammable or combustible materials near the
TV. Doing so may result in fire or explosion. Do not place any naked flame sources,
such as lit candles, cigarettes or incense sticks on top of the TV set.

• When not in use: When not using the TV for long periods of time, disconnect the
power cord from the wall outlet.

• Batteries: When removing batteries from the remote control, make sure to keep
them out of reach of infants, children and pets. Seek medical attention immediately if
a child has swallowed a battery. Never throw used batteries in a fire.

• Usage restriction: This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instructions concerning use of
the product by a person responsible for their safety.

• Children: Supervise children to ensure they do not play with the TV.

• Turning: When you are turning the TV, do not hold and push on the top section of
the TV, always turn at the bottom corner of the TV.

Cleaning and Maintenance

• Unplug: To reduce the risk of fire and electric shock, always unplug the TV before
cleaning.

• Cleaning: Only use a soft, dry cloth when cleaning the TV. Do not use a damp
cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air
freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or dust
on the power plug pins with a clean, dry cloth.

• Cleaning the screen: When you clean up dust or water drops on the LCD panel or
cabinet, the power cord should be physically removed from the mains outlet. You
may then wipe the TV with a dry soft cloth.

12

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Important Safety Instructions (Cont.)

• Repair: If the TV requires repair, contact the after sales support line; never
disassemble or modify the TV or attempt to service it yourself.

• Service: Refer all servicing to qualified service personnel. Servicing is required when
the TV has been damaged in any way, such as when the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the TV, when the
TV has been exposed to rain or moisture, does not operate normally, or has been
dropped.

Moving, Installing and Wall-Mounting the TV

When removing the TV from its original packaging, moving the TV to a different
location, cleaning, installing and wall mounting the TV, make sure you take blow
precautions:

• Always move the TV by two people holding it with both hands on either side of the
T V.

• Do not apply any pressure directly on the front screen of the TV, the LCD screen
may be damaged if not handled carefully.

• Beware of the TV stand if attached to the TV.

• Always place TV on a stable, flat and clean surface.

WARNING!

• Never tamper with any components inside the TV, or any other adjustment
controls not mentioned in this manual. All LED LCD TVs are high voltage
instruments.

• All repairs to this TV must only be performed by qualified TV service
personnel. There are no user-serviceable components within this TV. Changes
or modifications to this TV, including changes to parts, components and
constructional attributes that are responsible for safety and regulatory
compliance, may result in non-compliant and unsafe operation of this equipment.

• Children should never be allowed to move and play with the TV.

Disc Protection

• Store your discs in a cool area to avoid damage from heat.

• Do not touch the playback side of the disc.

• Do not attach tape or paper to the disc. To clean off dust, slightly moisten a soft
cloth and finish with a dry cloth.

• Do not use any type of solvent, commercially available benzene or antistatic spray
for vinyl LPs, as these may damage the discs.

• See the DVD Mode section for more disc cleaning and handling tips.

After Sales Support

Telephone: [phone]
Email: [e-mail]

13

Installation

Unpacking and Preparing the TV

Remove the TV carefully from its packaging, be careful not to apply any pressure to
the front of the LCD screen. Some accessory items may be located in cut-out sections
of the internal packaging, so make sure you check the entire packaging to not miss
any items. Once all items are removed from the packaging, use the list below to check
there are no items missing.

1 x 24" (61cm) FHD LED LCD TV
2 x Base stands
1 x Remote control
2 x “AAA” size batteries
1 x Composite AV cable
4 x Screws (for assembling the base stands to the TV)
1 x Instruction manual
1 x Warranty Card

Once all the accessory items have been accounted for, prepare your TV for installation
– you can either use it standing up on the supplied base stands on suitable furniture,
or mounted to a wall. You will find installation instructions for both options on the
following pages.

IMPORTANT!

The TV panel may be awkward to install on your own. We recommend you ask

someone to help with installation and/or removal of the stands, or with wall-

mounting the TV set.

After having installed the base stands (or wall-mounted the TV), follow the instructions
in the “Controls and Connections” section to ensure that you TV is correctly
connected to your TV antenna and related AV equipment (e.g., Blu-ray player,
amplifier, sound bar, etc.).

14

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Installation (Cont.)

Assembling the Base Stands

If you want to use the TV standing on appropriate furniture, first find a suitable location
where you can attach the TV base stands to the body of the TV. You will need to
arrange a soft cloth that is large enough to cover the entire front panel of the TV (for
protection of the LCD screen), as well as a screwdriver to attach the base stands.

Before using the TV, install the stands as described below, or if you want to mount it to
a wall, see page 16 for mounting advice; the wall mount (bracket) itself is not supplied.

IMPORTANT!

Make sure the TV is unplugged from the power supply before installing or removing

the base stands.

Step 1

Place a soft cushioned material on top
of a flat surface to prevent damaging the
screen panel. Then place the TV monitor
flat on top, with the screen side facing
down, as illustrated (2).

Step 2

Align the screw holes on the stands and
the bottom of the TV, as illustrated with
arrows (2).

Step 3

Tighten the screws (supplied) with a
screwdriver to affix the stands to the
panel.

CAUTION! Do not apply excessive force
as this may damage the screw holes

After Sales Support

Telephone: [phone]
Email: [e-mail]

1

2

3

15

Installation (Cont.)

Wall-Mounting the TV

IMPORTANT!

• Make sure the TV is unplugged from the power supply before mounting it to a wall
or taking it off the wall mount.

• We recommend you contact a professional for assistance when wall-mounting
the TV. We assume no liability for any eventual damage to the product or injury to
yourself if you mount the TV on your own.

• The TV set is equipped with holes on the back panel for use with wall-mounting
brackets (not included). Please use the illustration below as a reference when buying
wall-mounting brackets.

• Use four (4) standard M4*10mm screws (or longer, depending on the mounting
bracket) to mount this TV.

NOTE: The screws in the package are for securing the TV stands only. If you are wall­mounting the TV, please consult a qualified installer for further instructions on bracket
support and wall support.

Back of the TV

16

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]

Controls and Connections

Front and Side Button Controls

Front View

Back View

Side View

1

10

2

1 LED LCD Display screen

2 IR (infra-red) Sensor for remote

control.
Power Indicator: In standby
mode the indicator light is red;
when switching on the unit the
indicator light will illuminate blue.

3 VOL + / - : Decrease/increase the

volume level or move left/right.

4 CH + / - : Select the previous/next

channel or move up/down.

3

4

5

5

7

7

9

9

3

4

6

6

8

8

5 MENU: Enter the settings menu.

6 SOURCE: Select the input source.

7 Play/Pause: Play or Pause a DVD.

8 Eject: To remove a DVD

9 POWER: Turn the TV on/off.

10 DVD: DVD player

After Sales Support

Telephone: [phone]
Email: [e-mail]

17

Controls and Connections (Cont.)

Back Panel Connections

11

10

9

8

1 2 5 7

3 4

6

1 POWER: Power Input
2 EARPHONES output
3 PC AUDIO input
4 PC (VGA) input: Connect to a PC or other device with a VGA interface.
5 YPBPR input (Component): supports both SD (Standard Definition) and

HD (High Definition) picture quality.

6 OPTICAL output: Connect the unit with amplifier or other audio decoding

devices for optical audio signal output.

7 ANTENNA input: For connection of the external antenna.
8 HDMI inputs: Provides an all digital video/audio connection between

the TV and any HDMI device, such as a DVD player, gaming console or
A/V receiver.

9 USB input: Connect a USB storage device for PVR recording and

multimedia file playback.

10 VIDEO input (Composite): Supports SD picture quality connections.
11 AUDIO R/L input: Shared between Composite and Component video.

18

After Sales Support

Telephone: 1300 886 649
Email: [e-mail]