hisense RB390N4WC1 Instruction manual

RB390N4WB1
RB390N4WC1
RB390N4WW1
2
Contents
Installing your new appliance...............9
Reversing the door..........................10
Description of the appliance...............14
Display controls................................17
Using your appliance.........................21
Helpful hints and tips.........................24
Cleaning and care..............................25
Troubleshooting...............................26
Disposal of the appliance...................28
Safety and warning information
For your safety and correct usage, before installing and first using the appliance,read this user manual carefully, including its hints and warnings.To avoid unnecessary mistakes and accidents,it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold,so that anyone using it throughout its life,will be properly informed on its usage and safety notices. For the safety of life and property,keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
Safety for children and others who are vulnerable people
According to EN standard
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
According to IEC standard
This appliance is not intended for use by persons
3
(including children) with reduced physical,sensory or mental capabilities,or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person being responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Keep all packaging away from children as there is a risk
of suffocation.
If you are discarding the appliance,pull the plug out of the
socket,cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.
If this appliance, featuring a magnetic door seals,is to
replace an older appliance having a spring lock (latch) on the door or lid,be sure to make the spring lock unusable before you discard the old appliance.This will prevent it from becoming a death trap for a child.
General safety
WARNING —This appliance is intended to be used
in household and similar applications such as
-staff kitchen areas in shops,offices and other working environments;
-farm houses and hotels, motels and other residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
WARNING — Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged,it must be
replaced by the manufacturer,its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING — Keep ventilation openings,in the appliance
enclosure or in the built-in structure,clear of obstruction.
WARNING — Do not use mechanical devices or other
means to accelerate the defrosting process,other than those recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the
food storage compartments of the appliance,unless they are of the type recommended by the manufacturer.
WARNING — The refrigerant and insulation blowing gas
are flammable. When disposing of the appliance,do so only at an authorized waste disposal centre.Do not expose to flame.
WARNING —When positioning the appliance,ensure the
supply cord is not trapped or damaged.
WARNING —Do not locate multiple portable socket-
outlets or portable power supplies at the rear of the appliance.
4
Replacing the illuminating lamps
WARNING—The illuminating lamps must not be replaced
by the user! If the illuminating lamps is damaged,contact the customer helpline for assistance. This warning is only for refrigerators that contain illuminating lamps.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance,a natural gas with a high level of environmental compatibility,which is nevertheless flammable.During transportation and installation of the appliance,ensure that none of the components of the refrigerant circuit becomes damaged.
5
The refrigerant (R600a) is flammable.
WARNING — Refrigerators contain refrigerant and gases
in the insulation.Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.
The symbol is a warning and indicates the refrigerant and insulation blowing gas are flammable.
WARNING : Risk of fire / flammable materials
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is situated. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit,fire, and/or electric shock.
Electrical safety
1.The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.
3.Make sure that you can access the main plug of the appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6.You must not operate the appliance without the interior lighting lamp cover.
7.The fridge is only applied with power supply of single
phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope,for safety sake, be sure to apply A.C. Automatic voltage regulator of more than 350W to the fridge.The fridge must employ a special power socket instead of common one with other electric appliances. Its plug must match the socket with ground wire.
Daily use
Do not store flammable gas or liquids in the appliance,
there is a risk of an explosion.
Do not operate any electrical appliances in the appliance
(e.g. electric ice cream makers,mixers etc.).
When unplugging always pull the plug from the mains
socket,do not pull on the cable.
Do not place hot items near the plastic components of
this appliance.
Do not place food products directly against the air outlet
on the rear wall.
Store pre-packed frozen food in accordance with the
frozen food manufacture’s instructions.
The appliances manufactures storage recommendations
should be strictly adhered to.Refer to relevant instructions for storage.
Do not place carbonated or fizzy drinks in the freezer
compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance.
Frozen food can cause frost burns if consumed straight
from the freezer compartment.
Do not place the appliance in direct sunlight.
Keep burning candles,lamps and other items with naked
flames away from the appliance so that do not set the appliance on fire.
6
7
The appliance is intended for keeping food stuff and/or
beverages in normal household as explained in this instruction booklet.You should take care when move it as the appliance is heavy.
Do not remove or touch items from the freezer
compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
Never use the base,drawers,doors etc. to stand on or as
supports.
Frozen food must not be refrozen once it has been
thawed out.
Do not consume ice popsicles or ice cubes straight from
the freezer as this can cause freezer burn to the mouth and lips.
To avoid items falling and causing injury or damage to the
appliance,do not overload the door racks or put too much food in the crisper drawers.
caution! Care and cleaning
Before maintenance,switch off the appliance and
disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects,steam
cleaner,ethereal oils,organic solvents or abrasive cleansers.
Do not use a sharp objects instead of a plastic scraper
to remove frost from the appliance.
Installation Important!
For electrical connection carefully, follow the instructions
given in this manual.Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought
it.In this case retain packing.
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back in the compressor.
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be
too close to a wall to avoid touching or catching warm parts (compressor, ) to prevent the risk of a fire, follow the instructions relevant to installation.
The appliance must not be locate close to radiators or
cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
condenser
8
9
Installing your new appliance
Before using the appliance for the first time, you should be informed of the following tips.
Ventilation of appliance
In order to improve efficiency of the cooling system and save
energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat.For this reason,sufficient clear space should be available around the refrigerator. Suggest: It is advisable for there to be 50-70mm of space from the back to the wall,at least 100mm from its top,at least 100mm from its side to the wall and a clear space upfront to allow the doors to open 115°. As shown in follow diagrams.
Note:
This appliance performs well within
the climate class from SN to ST showed in the table below.It may not work properly if being left at a temperature above or below the indicated range for a long period.
Climate class
SN
N
ST
Stand your appliance in a dry place to
Ambient temperature
+10°C to +32°C +16°C to +32°C +16°C to +38°C
avoid high moisture.
Keep the appliance out of direct
sunlight, rain or frost. Stand the appliance away from heat sources such as stoves,fires or heaters.
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted.You can adjust them manually by hand or by using a suitable spanner.
To allow the doors to self-close, tilt the
top backwards by about 10mm .
717
115
831
Reversing the door
10
The side at which the door opens can be changed, from the right side (as supplied) to the left side, if the installation site requires. War ning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket.
Tools y ou wi ll ne ed
Not provided
8mm socket wrench
Cross-shaped screwdriver
When required, tilt the refrigerat or
Thin-blade screwdriver
8mm wrench
back in order to gain access to the base, you should rest the applian ce on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended. Diff ere nt mo del s may c orr esp ond t o diff ere nt pi ctu res . Mod els w ill b e written in the picture. If some parts are not shown in the picture, please ignore the relevant descripti on.
1. Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid racks damaged) and then close the door.
2.Remove part ①,loose part from the top right side of refrigerator.
scr ews
Sel f-tap ping
Upp er hing e cover
MODEL WITHOUT DISPLAY
3.Remove screws and hinge .When the refrigerator with
display on door, you need to pass connector through the hole of hinge.(Please hold upper do or by hand when installing).
Special flange
screws
Upper hinge
MODEL WITHOUT DISPLAY
Special flange
screws
Upper hinge
Electrical connector
Door racks
MODEL WITH DISPLAY
11
4. Remove the upper door from the middle hinge by carefully lifti ng th e door straight up. Then p lac e the upper door on a smooth surface with its upper cover upwards.
5.When the refrigerator with a display on door, take screw hole cover(right) from plastic bag and install it onto the top right side of refrigerator body.T hen r emo ve screw hole cover(left) from the top left side of appliance and put it into plastic bag. When the refrigerator without a display on door, pull out screw hole cover from the left side up rightly, and fix it on the right side.
6.When the refrigerator with a display on door, remove part from the top left side of upper cover and
take out part . Th en re mov e par t and put part into the top right
side of upper cover. Refer to above operation, install part and par t on to the top left side of upper cover.Install part of the top right side of upper cover. When the
refrigerator without a displa y on door, skip this step.
C
orner c ov er (left )Elect ri ca l conne ct or (left ) ③ Corne r co ve r(rig ht ) ④ Elect ri ca l conne ct or (righ t)
MODEL WITH DISPLAY
7. Loose screw and take down
part and part , Install replacement door stopper-le ft
provided (in the plastic bag) and p art (stop block) to the left side with screw . Keep part with the appliance for future reference.
MODEL WITH DISPLAY
Scr ew h ol e co ver Scr ew h ol e co ver
MODEL WITHOUT DISPLAY
8. Loose screws used to fix the middle hinge and remove midd le hinge. Th en re mov e the l owe r doo r.
9.Placethelowerdooronasmooth surfacewithitspanelupwards.
Loosescrew andtakedownpart
andpart ,Installreplacement doorstopper-left provided(inthe plasticbag)andpart (stopblock) totheleftsidewithscrew .Keep
part withtheapplianceforfuture
reference.
② ③ ④
Lowerh in gep ar t(r ig ht )
Adjus ta bl ebo tt omf ee tpart
Adjus ta bl ebo tt omf ee tpart
Self- ta pp in gsc re ws
Adjus ta bl ebo tt omf ee tpart
12.
Removepart fromthelower
hingepin,looseoutthelowerhinge pin,changeittothereversehole site,andthentightenintoposition,
theninstall part onthelower
hingepin.
Replacetheitemsremountin
13.
step11,changepart toleft and
thenfixthemwithscrews Install
,
④.
12
10.Change screwholecoverson middlecoverplatefromlefttoright (asshowninfigurebelow).
part atlast.
Lower hinge part(left)
14.
Slotthelowerdoorontothe bottomhingepinandholdin position. Turnthemiddlehingeby 180°,changethewasherontheaxis tothelowerside,adjustthemiddle hingetotheappropriatepositionand theninstallitensuringthelower doorinsecuredplace.
11. Tiptherefrigeratorbackwards, removepart
②.
Note:washermay sticktolowerdoor.
Movetheupperdoortoan
15.
Washer
appropriateposition,andthenfix
13
part byscrews .Beforefixpart , passconnector throughhinge
refertostep3.(Pleaseholdupper doorbyhandwheninstalling)
Spec ia lflang esc rews Uppe rhi nge
electrica lconn ector
upperhingec over
self tappings crew
-
MODEL WITH DISPLAY
17. Opentheupperdoor,mountdoor racksandthencloseit.
Note:
Ifyourappliancehashandle,you havetoreversehandlebyfollow instructionsbelow. Removetheupperdoorandplaceit onasmoothsurfacewithitspanel
upwards.Leverpart andpart ,
MODEL WITHOUT DISPLAY
Spec ia lflang esc rews
Uppe rhi nge
Elec tr icalco nn ector
MODEL WITH DISPLAY
Connectelectricalconnector
16.
asshowninthepicture,thenfixpart
byscrew refertostep2.
thenloosescrews ,asshownin thepicture.Changehandle tothe rightside,theninstallscrews , part andpart inturn.
Handle cover sSpecial screwsHandleScrew hole cover
Description of the appliance
The view of an appliance with dispenser
14
1.Cabinet
2.LED light & thermostat control
3.Wine shelf(alternative)
4.Glass shelves
5.Crisper cover
6.Crisper
7.Tray(alternative with a upper drawe r )
8.Middle drawer
9.Lower drawer
11.Re fri ger ato r doo r
12.Refrigerator door gasket
13.Upper rack
14.Middle rack
15.Water tank
16.Lower rack
17.Handle(optional)
18.Freezer door
19.Freezer door gasket
20.Accessories
10.Adjustable feet
Note:
Due to unceasing modification o f our p rod uct s,s ome p art s of yo ur
refrigerator may be slightly diff ere nt fr om th is instruction manual,but its
functions and using methods remain t he sa me.
To get more space in the freezer, you can remov e dra wer s(e xce pt lo wer
freezer drawer), ice tray.
15
Description of the appliance
The view of an appliance without dispenser
1.Cabinet
2.LED light & thermostat control
3.Wine shelf(alternative)
4.Glass shelves
5.Crisper cover
6.Crisper
7.Tray(alternative with a upper
drawer)
8.Middle drawer
9.Lower drawer
10.Adjustable feet
11.Refrigerator door
12.Refrigerator door gasket
13.Upper rack(X2)
14.Lower rack
15.Handle(optional)
16.Freezer door
17.Freezer door gasket
Note:
Due to unceasing modification o f our p rod uct s,s ome p art s of yo ur
refrigerator may be slightly diff ere nt fr om th is instruction manual,but its functions and using methods remain t he sa me.
To get more space in the freezer, you can remov e dra wer s(e xce pt lo wer
freezer drawer), ice tray.
Description of the appliance
The view of an appliance with display on door
16
1.Cabinet
2.LED light
3.Wine shelf(alternative)
4.Glass shelves
5.Upper crisper
6.Crisper cover
7.Lower Crisper
8.Upper drawer
12.Refrigerator door
13.Refrigerator door gasket
14.Upper rack(X2)
15.Lower rack
16.Handle(optional)
17.Freezer door
18.Freezer door gasket
19.Accessories
9.Middle drawer
10.Lower drawer
11.Adjustable feet
Note:
Due to unceasing modification o f our p rod uct s,s ome p art s of yo ur
refrigerator may be slightly diff ere nt fr om th is instruction manual,but its functions and using methods remain t he sa me.
To get more space in the freezer, you can remov e dra wer s(e xce pt lo wer
freezer drawer), ice tray.
17
Display controls
Display panel inside door
User your appliance according t o the following control regulatio ns, y our appliance has the correspondi ng functions and modes as the displa y panels showed in the pictures bel ow. When the appliance is powered on for the
first time, the backlighting of the icons on display panel starts working. If no buttons have been pressed and the doors are closed, the backlighting will turn off.
Dis pl ay p an el insi de d oo r
Controlling the temperature
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C. If you want to change the temperature, follow the instructions below.
Caution!
When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary from the temperature values displaye d on th e panel, depending on how much food you store and where you place them. Ambient temperature may also affe ct th e act ual t emp era tur e ins ide the appliance.
Fridge
Press “ Temp ”(display panel on door) to
set fridge temperature between 2 and
8 as needed, and display panel will display corresponding values according to the following sequence.
Press “ ” to set fridge temperature between 2°C and 8°C as needed, and display panel will display corresponding values according to the following sequence.
Note: When the“ ” is lighted, the holiday mode is activated. Check the Holiday mode instruction.
8
Super Freeze( ) Super Freeze will quickly lower the
temperature within the freezer so food will freeze faster. This can lock in the vitamins and nutrients of fresh food and keep food fresh longer.
You can press “ ”for 3 sec to get into super freeze mode.
When Super freeze Mode is selected, the light will be illuminated and the freezer temperature will be set at -24°C.
In case of the maximum amount of food to be frozen, please wait about 24 h.
Super freeze automatically switches off after 52 hours and then the freezer temperature setting will revert back to the previous setting.
Holiday ( )
If you are going to be away for a long period of time, press “ ”,you can activate this function.
When Holiday Mode is activated, the light will be illuminated. The freezer temperature will be set at -18°C and the fridge temperature will be set at 15°C.
Important!Do not store any food in the
fridge during this time.
3.Switch( )(display panel inside door)
You can switch on or switch off your appliance by press this button.
Press "Switch" for 3 seconds, after a buzzer sound, the appliance will be turned off.
Press "Switch" for 1 second, after a buzzer sound, the appliance will be turned on.
18
19
Display controls
Display panel on door
Displ ay p an el on doo r
The temperature can be changed between °C and °F by pressing “SET TEMP” for 3 seconds.
Controlling the temperature
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C. If you want to change the temperature, follow the instructions below.
Caution!
When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place them. Ambient temperature may also affect the actual temperature inside the appliance.
Fridge
Press “ZONE CHOICE”, the “ ”light will turn on. Then press “SET TEMP”, you can set fridge temperature between 2°C and 8°C as needed, and display panel will display corresponding values according
to the following sequence.
8
Freezer
Press “ZONE CHOICE”, when the “ ” light turns on. Then press “SET TEMP”, you can set freezer temperature between
-14°C and -24°C as needed, and the display panel will display corresponding value according to the following sequence.
-18°C
-17°C
-19°C
-16°C
-20°C
-15°C
-21°C
-24°C-14°C
-22°C -23°C
Super Freeze( )
Super Freeze will quickly lower the temperature within the freezer so food will freeze faster. This can lock in the vitamins and nutrients of fresh food and keep food fresh longer.
You can press “SUPER” to get into
super freezer mode.
Whensuper freeze Mode is selected, the light will be illuminated and the freezer temperature will be set at -24°C.
In case of the maximum amount of food to be frozen, please wait about 24 h.
Super freeze automatically switches off after 52 hours and then the freezer temperature setting will revert back to the previous setting.
Eco energy
This function makes the freezer work in a power saving mode which is useful for reducing energy consumption when you are away.
You can press “ECO MODE” to get into economic energy mode.
When economic energy Mode is
20
activated, the light will be illuminated. The freezer temperature will be set at -17°C and the fridge temperature will be set at 6°C.
Switch
You can switch on or switch off your appliance by press this button.
Press “ ”for 3 seconds, after a buzzer sound, meanwhile the digital light will show “OF”, the appliance will be turned off.
Press “Switch” for 3 seconds, after a buzzer sound,the appliance will be turned on.
Alarm
When the door of fridge or freezer has been opened for over 2 minutes, the door alarm will sound. In case of door alarm, buzzer will sound 3 times every 1 minute and will stop alarming automatically after 8 minutes.
To save energy, please avoid keeping the door open for a long time when using the appliance. The door alarm can also be cleared by closing the door.
sli de bar
Ext ra fres h box
21
Using your appliance
Your appliance is supplied with a number of accessories and this section describes how best to use them.
Door rack
It is suitable for the storage of eggs, canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the racks.
Flexible wine rack
It is for storing bottled wine or drinks,
and it can be taken out to clean.
Shelf in Refrigerator chamber
There are three shelves in refrigerator chamber, and they can be taken out to be cleaned.
Extra fresh box(optional)
In certain model, there will be a extra fresh box(draw). In this draw you can get a lower temperature to store fish, meat and other erodible food. Normally it will be about 2°C lower than the other part of the fresh compartment. You can move the slide bar to set the temperature.
Note:Due to the environment temperature and setting temperature both influence the temperature of extra fresh box(draw), the actual temperatur e may change in a certain range. The temperature of this drawer may lower than zero, so it is normal that liquid in this drawer was frozen.
Crisper cover
It is for controlling the temperature of the crisper and avoiding the vegetable losing moisture.
You can adjust the slide bar on the crisper cover to keep different humidity in the crisper.Push the slide bar to the left, you will keep a higher humidity which can storage vegetable and fruit long and fresh,to the right will be lower humidity.
Fruit and vegetable crisper
It is suitable for the storage of fruits and vegetable.
Freezer Drawer
It is used to store food which needs to be frozen, including meat, fish, ice cream,
etc.
Ice cube tray
It is used to make ice cubes. To make ice cubes, please fill water into the ice cube trays and the water level shall not exceed the top line(ideally eighty percent of the
22
ice tray volume). Place the tray into the freezer drawer and wait at least two hours for the ice cubes to be formed. After the cubes are formed, gently twist the tray to separate the cubes and trays.
Wat er Dispenser
The water dispenser, located in th e fridge door, is for storing drinki ng water. With this appliance you can obtain chilled water easily wit hou t opening the refrigerator. You s hou ld be informed of following tips.
Before Using
Before using this appliance for the first time, you should use it as follows.
whether the washer reversed or no t.
1.Insert the head into the hole.
2.Fit the tank along the guides on the door.
3.Press down two side of the tank.
4.When you hear a click sound, that means the installation is compl ete d.
Slo t
Gui de
1. Take ou t the m idd le ra ck.
2. Hold the two sides of the water tank tightly, then p ull u p the w ate r tank by shaking up and down.
3. Unscrew the head, then clean it and the inside of water tank.
Assembling
Before assembling, please dra in th e water inside the tank , and check
War ning!
1.Be careful not to press on the head;
2.When fitting the water tank, ensure the head inserted into the hole first.
Filling water
Before you fill the drinking water into the water tank, ensure that the water tank is steady and in a correct position.
Caution!
Fill with water up to 3L(which is suggested), and not above the level. Otherwise, it may overflow when the
23
lid is close.
1.We r eco mme nd th at yo u fil l the water by the following way.
2.Open the small lid by rotating it, and fill water from the inlet of the large lid. Please remember rota te the small lid back to it’s o rig ina l position when finish filling wa ter.
War ning!
Don't touch other parts of the appliance when filling wat er, it m ay cause the water leakage.
Dispensing water
1.Make sure the cover of the water tank is fitted on.
2.Close the fridge door and check the dispenser.
Receiving Water
You should use the correct cup to receive water underneath the wa ter dispenser.
War ning!
Don't push the dispenser lever forward without cup, it may cause the water leak from the dispenser.
Cleaning
1.Put the water tank out of the door carefully, an d the n was h the t ank , lid and head lightly in water.
2. After you have successfully cleaned the appliance, you shou ld dry it by natural drying or using the dryer.
3.If you have used the water dispenser for many times, the water in the receiving tank may drop on the floor, which may make your floor wet, and you should clean the tank with dry towel regularly before overflow.
Helpful hints and tips
24
Energy saving tips
We recommend that you follow the tips below to save energy.
Try to avoid keeping the door open for
long periods in order to conserve energy.
Ensure the appliance is away from any
sources of heat (Direct sunlight, electric oven or cooker etc)
Don't set the temperature colder than
necessary.
Don't store warm food or evaporating
liquid in the appliance.
Place the appliance in a well ventilated,
humidity free, room. Please refer to Installing your new appliance chapter.
If the diagram shows the correct
combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration.
Hints for fresh food refrigeration
Do not place hot food directly into the
refrigerator or freezer,the internal temperature will increase resulting in the compressor having to work harder and will consume more energy.
Do cover or wrap the food,particularly if
it has a strong flavor.
Place food properly so that air can
circulate freely around it.
Hints for refrigeration
Meat (All Types) Wrap in polythene
food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers.
Cooked food, cold dishes, etc.:
They should be covered and may be placed on any shelf.
Fruit and vegetables:
They should be stored in the special drawer provided.
Butter and cheese:
Should be wrapped in airtight foil or plastic film wrap.
Milk bottles:
Should have a lid and be stored in the door racks.
Hints for freezing
When first starting-up or after a period
out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.
Prepare food in small portions to enable
it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
Wrap up the food in aluminum foil or
polyethylene food wraps which are airtight.
Do not allow fresh,unfrozen food to
touch the food which is already frozen to avoid temperature rise of the latter.
Iced products,if consumed immediately
after removal from the freezer compartment,will probably cause frost burns to the skin.
It is recommended to label and date
each frozen package in order to keep track of the storage time.
Hints for the storage of frozen food
Ensure that frozen food has been
stored correctly by the food retailer.
Once defrosted,food will deteriorate
rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.
Switching off your appliance
If the appliance needs to be switched off for an extended period,the following steps should be taken prevent mould on the appliance.
1.Remove all food.
2.Remove the power plug from the mains socket.
3.Clean and dry the interior thoroughly.
4.Ensure that all the doors are wedged open slightly to allow air to circulate.
25
Cleaning and care
For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every two months).
Warning!
The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket.
Exterior cleaning
To maintain good appearance of your appliance, you should clean it regularly.
Wipe the control panel with a clean, soft
cloth.
Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance.This helps ensure an even distribution of moisture to the surface.
Clean the doors, handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth.
Caution!
Don't use sharp objects as they are likely to scratch the surface.
Don't use Thinner, Car detergent, Clorox, ethereal oil,abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire.
Interior cleaning
You should clean the appliance interior regularly.It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda,and then rinse with warm water using a wrung-out sponge or cloth.Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts before putting them back into place. Although this appliance automatically
defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long.If the frost is too thick, choose a time when the freezer is nearly empty and proceed as follow:
1.Remove existing food and accessories baskets,unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the process.
2. When defrosting is completed,clean your freezer as described above.
Caution!
Do not use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door.Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning. Caution!Only after the door seals are completely dry should the appliance be powered on .
Replacing the LED light:
Warning: The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance.
26
Troubleshooting
If you experience a problem with yo ur ap pli anc e or ar e con cer ned t hat t he appliance is not functioning co rre ctl y, yo u can c arry out some easy checks before calling for service,pl eas e see b elo w. War ning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mention ed be low, c ont act a q ual ifi ed electrician, authorized ser vic e eng ine er or t he sh op wh ere y ou pu rch ase d the product.
Appliance is not working correctly
Odours from the compartments
Noise from the appliance
The motor run s conti nuo usly
Problem
Check whether the power cord is plugged into the power outlet properly.
Check the fuse or circuit of your power supply,replace if necessary.
It is normal that the freezer is not operating during the defrost cycle, or for a short time after the appliance is switched on to protect the compressor.
The interior may need to be cleaned
Some food, containers or wrapping cause odours.
The sounds below are quite normal:
Compressor running noises.
Air movement noise from the small fan motor in the
freezer compartment or other compartments.
Gurgling sound similar to water boiling.
Popping noise during automatic defrosting.
Clicking noise before the compressor starts.
Other unusual noises are due to the reasons below and may need you to check and take action:
The cabinet is not level.
The back of appliance touches the wall.
Bottles or containers fallen or rolling.
It is normal to frequently hear the sound of the motor, it will need to run more when in following circumstances:
Temperature setting is set colder than necessary
Large quantity of warm food has recently been stored
within the appliance.
The temperature outside the appliance is too high.
Doors are kept open too long or too often.
After your installing the appliance or it has been switched
off for a long time.
Possible cause & Solution
27
A layer of frost occurs in the compartment
Temperature inside is too warm
Temperature inside is too cold
Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation.Ensure that door is fully closed.To remove the frost, please refer to the“Cleaning and care” chapter.
You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top .
Increase the temperature by following the“Display controls” chapter.
Doors can’t be closed easily
Water drips on the floor
The light is not working
Check whether the top of the refrigerator is tilted back by 10-15mm to allow the doors to self close, or if something inside is preventing the doors from closing.
The water pan (located at the rear bottom of the cabinet) may not be properly leveled, or the draining spout under neath the top of the compressor depot may not be properly positioned to direct water into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout.
Check if the refrigerator is power-off for a long time, this may cause the ice in the bucket to melt into water,and flow to the floor .
The LED light may be damaged.Refer to replace LED
lights in cleaning and care chapter.
The controI system has disabled the lights due to the
door being kept open too long,close and reopens the door to reactivate the Iights.
Disposal of the appliance
It is prohibited to dispose of this appliance as household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance
1. Pull out the mains plug from the mains socket.
2. Cut off the power cord and discard with the mains plug. Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.
Correct Disposal of this product
This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.
28
To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making icecream and making ice cubes.
- One-, two- and three-star compartments are not suitable for the freezing of fresh food.
29
Order
1
2
3
4
5
6
7
8
9
Compartments TYPE
Fridge
(***)*-Freezer
***-Freezer
**-Freezer
*-Freezer
0-star
Chill
FreshFood
Wine
Target storage
temp.[ ]
+2~+8
18-
18-
12-
6-
-6~0
-2~ 3+
0~ 4+
+ +5~ 20
Appropriate food
Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, drinks and other foods which are not suitable for freezing.
Seafood (fish,shrimp,shellfish),fr esh wat er aquatic products and meat products (recommended for 3 months , he long er the storage time,the wors e the taste an d nutrition),suita ble for frozen fr esh food.
Seafood (fish, shrimp, shellfish),freshwater aquatic products and meat products (recommended for 3 months,
the longer the storage time,the worse the
taste and nutrition), frozen fresh
.
food
Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended for 2 months,the longer the storage time,the worse the taste and nutrition), are not suitable for frozen fresh food.
Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended for 1 month,the longer the storage time,the worse the taste and nutrition), are not suitable for frozen fresh food.
Freshpork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably no later than3 days) . Partially encapsulated processedfoods(non­freezable foods)
Fresh/frozenpork,beef, chicken, freshwater aquatic products, etc.(7 days below 0 and above 0 isrecommended for consumptionwithin thatday,
preferably no morethan 2days). Seafood (less than 0for 15 days, it is not
recommended to store above 0 )
Fresh pork,beef,fish,chicken,cooked food,etc. (Recommended to eat within the same day,preferably no more than 3 days)
red wine,white wine,sparkling wine etc.
are not suitable for
t
Note: please store different foods according to the compartments or target storage temperature of your purchased products.
- If the refrigerating appliance is left empty for long periods,switch off,defrost, clean,dry, and leave the door open to prevent mould developing within the appliance.
Hisense Service Help Line:0191 387 0804
Loading...