9772-90 Replacing the Pin
The model 9772-90 pin is a replacement part for the model 9772 PIN TYPE
LEAD. Perform the following steps to replace the pin.
Specific ations
Model 9772-90’s pin
1. Turn off the power of the device and remove the 9772.
2. Pull out the pin tip to be replaced, using pliers or a similar tool.
Model 9772
PIN TYPE LEAD
3. Replace the 9772-90 pin tip by inserting a new pin into the socket and
pressing against a hard board or other surface to fix the pin firmly in place.
Model 9772-90’s pin
4. Check the performance. Measure an object with a known resistance. Make
sure that the measured resistance is correct before using the pin type lead.
Operating temperature
and humidity
Storage temperature
and humidity
Operating Environment Altitude up to 2000 m (6562 feet), Indoors
Size&Weight Approx. 19 mm (0
Accessories Instruction manual
°C to 40°C (32°F to 104°F), 80%RH or less
0
(no condensation)
°C to 50°C (14°C to 122°C), 80%RH or less
-10
(no condensation)
.75”)/ Aprrox. 0.15 g (0.005 oz.)
9772B980-00 06-03H
Loading...