Hilti METAL HIT User Manual

echanical Anchoring Systems

Metal Hit Anchor 4.3.13

4.3.13.1 Product Description

he Hilti Metal Hit Anchor is a drive-in

T type expansion anchor consisting of a

inc plated drive pin and an alloy

z expanding body for light duty fastenings in concrete and masonry.

roduct Features

Quick and easy fastening for

• maximum speed and installation

• Low profile mushroom head style

rovides a clean, tamper proof

p fastening

• Anchor design allows easy

hrough-type fastenings even in

t bottomless holes

• Consistent load values provide light duty fastenings in concrete and masonry

• Choice of stainless steel or carbon steel finish allows outdoor or indoor use

4.3.13.2 Material Specifications

Body material: Aluminum/Zinc Alloy Drive Pin: Zinc plated carbon steel conforming to AISI 1018. Type 304 Stainless Steel

(Stainless Steel Version)

4.3.13.1 Product Description

4.3.13.2 Material Specifications

4.3.13.3 Technical Data

4.3.13.4 Installation Instructions

4.3.13.5 Ordering Information

4.3.13.3 Technical Data

Metal HIT Ultimate Loads

Anchor Embed.

Size Depth Tension Shear Tension Shear Tension Shear

in. in. (mm) lb (kN) lb (kN) lb (kN) lb (kN) lb (kN) lb (kN)

3/16 5/8 (16) – – 900 (4.0) 905 (4.0) – –

1/4 3/4 (19) 675 (3.0) 1395 (6.2) 1270 (5.6) 1595 (7.1) 890 (4.0) 1400 (6.2) 1/4 1 (25) 795 (3.5) 1585 (7.1) 1545 (6.9) 1600 (7.1) 1220 (5.4) 1450 (6.5)

Recommended to use safety factor of 5.0, except overhead applications use 10.0.

2000 psi (13.8 MPA) Hollow Concrete Block Red Clay Brick

4.3.13.4 Installation Instructions

1. Drill hole at least 1/4" deeper than anchor

2 3

2. Install anchor through fixture. 3. Hammer in nail until nail head is flush with anchor body. Do not overdrive.

4.3.13.5 Ordering Information

Description

Carbon Stainless Bit Diameter

Item No

(in.) Box Qty

Metal Hit 3/16" x 7/8" 00066137 N/A 3/16 100 Metal Hit 1/4" x 3/4" 00015538 N/A 1/4 100 Metal Hit 1/4" x 1" 00066138 00230567 1/4 100 Metal Hit 1/4" x 1-1/4" 00066139 00230568 1/4 100 Metal Hit 1/4" x 1-1/2"

00066140

00230569

1/4 100

Metal Hit 1/4" x 2" 00045453 00230570 1/4 100

1 For Hilti matched tolerance carbide tipped drill bits, see Section 8.4.1.

Hilti, Inc. (US) 1-800-879-8000 | www

.us.hilti.com

I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www

.ca.hilti.com

I Pr

echnical Guide 2006 271

oduct T