Hilti KWIK TOG User Manual

echanical Anchoring Systems

Kwik Tog 4.3.16

4.3.16.1 Product Description

The Hilti Kwik-Tog is a plastic anchor

esigned to accept #8 or #10 screws for

d light duty applications in hollow or solid base materials

roduct Features

• Unique one piece design for asy setting

• Three convenient sizes for use in a

variety of hollow base materials from 1/4" drywall to block and concrete

• Leg braces provide added support Ribs on body help prevent anchor

• from spinning during installation

• Remains mounted in the wall with-

ut screw for convenient handling,

o installation and reuse

4.3.16.2 Material Specifications

Plastic: polypropylene for use in temperature range from –40°F to 140°F

4.3.16.3 Technical Data

Specification Table

S = Thickness of material being fastened

Base Material Drill Bit

Thickness Diameter

(in.) (in.) L d

HLD KWIK-TOG 2 specially designed for 1/2" sheetrock

5/32" to 1/2" 3/8" 1-1/4" + S #8 / #10 17/32" to 19/32" 3/8" 1-1/4" + S #8 / #10 greater than 1-3/8" 3/8" 1-9/16" + S #10 / #12

HLD KWIK-TOG 3 specially designed for 5/8" sheetrock

5/8" to 3/4" 3/8" 1-1/2" + S #8 / #10 3/4" to 7/8" 3/8" 1-1/2" + S #8 / #10 greater than 1-5/8" 3/8" 1-13/16" + S #10 / #12

HLD KWIK-TOG 4

15/16" to 1-1/8" 3/8" 1-7/8" + S #8 / #10 1-1/8" to 1-1/4" 3/8" 1-7/8" + S #8 / #10 greater than 2" 11/32" 2-3/16" + S #10 / #12

HLD Kwik-Tog Allowable Loads

1/2" Drywall 5/8" Drywall Block

Description lb (N) lb (N) lb (N)

Tension Tension Tension

HLD 2 20 (89) 25 (111) 40 (178) HLD 3 — 35 (156) 50 (222) HLD 4 — — 70 (311)

1 Based on using a safety factor of 5.0.

4.3.16.1 Product Description

4.3.16.2 Material Specifications

4.3.16.3 Technical Data

4.3.16.4 Installation Instructions

4.3.16.5 Ordering Information

Hollow

Concrete

4.3.16.4 Installation Instructions

1 2 3

1. Compress wings together.

2. Insert anchor through drilled hole.

3. Insert and tighten screw through fixture to expand wings.

4.3.16.5 Ordering Information

HLD Kwik-T

Description Item No. in. Thickness Tension, lb(kN) Base Mtl. Base Mtl. Per Bag

og Anchor Pr

Kwik-Tog 2 (HLD2) 00335506 3/8 3/16 to 5/8 25 (0.11) #8 or #10 #10 150 Kwik-Tog 3 (HLD3) 00335507 3/8 5/8 to 7/8 35 (0.16) #8 or #10 #10 100 Kwik-Tog 4 (HLD4) 00335508 3/8 15/16 to 1-1/4 — #8 or #10 #10 100

1 For Hilti matched tolerance carbide tipped drill bits, see Section 8.4.1. 2 Screw not included

Hilti, Inc. (US) 1-800-879-8000 | www

ogram

Bit Hollow Base Load in

Dia.1Material 5/8" Drywall Hollow Solid Qty

.us.hilti.com

Allowable Recommended Screw Size

I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www

.ca.hilti.com

I Pr

echnical Guide 2006 275

oduct T