Hilti KWIK BOLT TZ INSTALLATION

M

Kwik Bolt TZ Expansion Anchor 4.3.4

4.3.4.4 Kwik Bolt TZ Anchor Installation Instructions
into normal-weight and lightweight concrete

echanical Anchoring Systems

1. Hammer drill a hole to the same nominal

diameter as the Kwik Bolt TZ. The hole depth
must exceed the anchor embedment by at least
1/4 inch. The fixture may be used as a drilling
template to ensure proper anchor location.

3. Drive the Kwik Bolt TZ into the hole using

a hammer. The anchor must be driven
until at least 4 threads are below the
surface of the fixture.

2. Clean hole.

4. Tighten the nut to the recommended

installation torque.

Hilti, Inc. (US) 1-800-879-8000 | www

.us.hilti.com

I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www

.ca.hilti.com

I Pr

echnical Guide 2006 221

oduct T