Hilti HSL-3 User Manual

echanical Anchoring Systems

4.3.2 HSL-3 Heavy Duty Sleeve Anchor

4.3.2.4 HSL-3 Installation Instructions

1. Using the correct diameter metric bit, drill hole to minimum required hole depth or deeper.

3. Using a hammer, tap the anchor through the part being fastened into the drilled hole until the washer is in contact with the fastened part. Do not expand anchor by

2. Remove drilling debris with a blowout bulb or with compressed air.

4. Using a torque wrench, apply the specified installation torque. HSL-3-B does not require use of a torque wrench. Tighten until torque cap shears off.

hand prior to installation.

4.3.2.5 Ordering Information

HSL-3 Bolt Version

Description

Item No

371775

HSL-3 M 8/20 40 371776 HSL-3 M 8/40 40 371778 HSL-3 M 10/20 20 371779 HSL-3 M 10/40 20 371781 HSL-3 M 12/25 20 371782 HSL-3 M 12/50 20 371784

HSL-3 M 16/25 10 371785 HSL-3 M 16/50 10 371787 HSL-3 M 20/30 371788 HSL-3 M 20/60 371790 HSL-3 M 24/30 4 371791 HSL-3 M 24/60 4

206 Hilti, Inc. (US) 1-800-879-8000 | www

Box Qty

.us.hilti.com

HSL-3-B Tor

Item No

371807 371808 HSL-3-B M 12/25 20 371809 HSL-3-B M 12/50 10 371810 HSL-3-B M 16/10 10 371811 HSL-3-B M 16/25 10 371814 HSL-3-B M 20/30 6 371817

que Cap

Description

HSL-3-B M 12/5 20

HSL-3-B M 24/30 4

Box Qty

HSL-3-G Stud Version

Item No

371793 371796 HSL-3-G M 10/20 20 371799 HSL-3-G M 12/25 20 371800 HSL-3-G M 12/50 10 371802 HSL-3-G M 16/25 10 371803 HSL-3-G M 16/50 10 371805

371806 HSL-3-G M 20/60 6 6 6

I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www

Description

HSL-3-G M 8/20 40

HSL-3-G M 20/30 6

.ca.hilti.com

I Pr

oduct T

Box Qty

echnical Guide 2006