HIKVISION DS-KV8102-1A, DS-KV8202-1A, DS-KV8402-1A, DS-KV8102-1C, DS-KV8102-2C User Manual

UD.6L0206D1033A01
Video Intercom Door Station (V Series)
User Manual
Video Intercom Door Station·User Manual
i
User Manual
©2015 Hangzhou Hikvision Digital Technology Co., Ltd.
This user manual is intended for users of the models below:
Series
Model
Door Station (V Series)
DS-KV8102-1A
DS-KV8202-1A
DS-KV8402-1A
DS-KV8102-1C
DS-KV8102-2C
It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This
manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL. HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
Video Intercom Door Station·User Manual
ii
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
0100001050608
Video Intercom Door Station·User Manual
iii
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits
for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Video Intercom Door Station·User Manual
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for
the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture.
Warnings Follow these safeguards to prevent serious injury or death.
Cautions Follow these precautions to prevent potential injury or material damage.
Video Intercom Door Station·User Manual
v
Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Video Intercom Door Station·User Manual
vi
Table of Contents
1 Overview ...................................................................................................... 1
1.1 Introduction ............................................................................................................. 1
1.2 Main Features .......................................................................................................... 1
2 Appearance .................................................................................................. 2
2.1 Appearance of Door Station (DS-KV8X02-1A) .......................................................... 2
2.2 Appearance of Door Station (DS-KV8102-XC) .......................................................... 3
3 Typical Application ....................................................................................... 4
3.1 Typical Application of Door Station (DS-KV8X02-1A) ............................................... 4
3.2 Typical Application of Door Station (DS-KV8102-XC) ............................................... 4
4 Terminals and Interfaces of Wiring ............................................................... 6
5 Installation and Wiring ................................................................................. 7
5.1 Installation of DS-KV8X02-1A Model ....................................................................... 7
5.1.1 Gang Box for DS-KV8X02-1A Model .................................................................. 7
5.1.2 Wall Mounting with Gang Box of DS-KV8X02-1A Model ................................... 8
5.2 Installation of DS-KV8102-XC Model........................................................................ 9
5.2.1 Installation Plate for DS-KV8102-XC Model ....................................................... 9
5.2.2 Wall Mounting with Gang Box of DS-KV8102-XC Model ................................. 10
5.3 Wiring .................................................................................................................... 12
5.3.1 Door Lock Wiring ............................................................................................. 12
5.3.2 Door Magnetic Wiring ..................................................................................... 13
5.3.3 Door Switch Wiring ......................................................................................... 13
5.3.4 Wiring of Alarm Device Input .......................................................................... 14
6 Before You Start ........................................................................................ 15
7 Batch Configuration Tool ............................................................................ 15
7.1 Activate the Device ................................................................................................ 15
7.2 Adding Device ........................................................................................................ 16
7.2.1 Adding Online Devices .................................................................................... 16
7.2.2 Adding Device by IP Address ........................................................................... 18
7.3 Edit Network Parameters ....................................................................................... 21
7.4.1 System ............................................................................................................. 22
7.4.2 Video Intercom ................................................................................................ 27
7.4.3 Network .......................................................................................................... 31
7.4.4 Video Display ................................................................................................... 33
8 Setting the Door Station via iVMS-4200 ..................................................... 35
8.1 System Configuration ............................................................................................. 35
8.2 Device Management .............................................................................................. 35
8.3 Live View of Device ................................................................................................ 36
Video Intercom Door Station·User Manual
vii
8.4 Picture Storage ...................................................................................................... 37
8.5 Group Management .............................................................................................. 37
8.5.1 Assigning Devices to Group ............................................................................. 37
8.5.2 Card Management .......................................................................................... 41
8.6 Notice Management .............................................................................................. 48
8.6.1 Query Unlocking Log ....................................................................................... 48
8.7 Device Arming Control ........................................................................................... 48
9 Basic Operation .......................................................................................... 51
9.1 Calling Resident ..................................................................................................... 51
9.1.1 Calling Resident (Device DS-KV8X02-1A) ......................................................... 51
9.1.2 Calling Resident (Device DS-KV8102-XC) ......................................................... 52
9.2 Issuing Card ........................................................................................................... 53
9.3 Door Unlocking by Swiping Card ............................................................................ 53
Appendix ...................................................................................................... 54
Installation Notice ....................................................................................................... 54
Wiring Cables ............................................................................................................... 54
Specification ................................................................................................................ 54
Video Intercom Door Station·User Manual
1
1 Overview
1.1 Introduction
The video intercom system can realize functions such as video intercom, resident-to­resident video call, live view of HD video, access control, one-card system, elevator linkage, zone alarm, public notice and visitor messages to form a complete smart community video intercom solution.
The video intercom door station is mainly applied in situations such as community, villa, and official buildings.
1.2 Main Features
Support video intercom function; HD video surveillance (Max. resolution 1280×720@25fps, WDR, 120° wide angle); Auto self-adaptive light supplement (White Light/IR Supplement); Support access control function;
Supports issuing card function via local station;
Auto-upload captured picture while unlocking the door; Support elevator linkage; Support door magnetic alarm and tamper-proof alarm function;
Support noise suppression and echo cancellation;
Remote upgrade, batch setting functions.
Video Intercom Door Station·User Manual
2
2 Appearance
2.1 Appearance of Door Station (DS-KV8X02-1A)
1
2
3
4
5
6
7
8
Figure 2-1 Appearance of Door Station
Description of Door Station
Models
No.
Description
DS-KV8102-1A DS-KV8202-1A DS-KV8402-1A
1
Low Illumination Supplement
Light
2
Built-in Camera
3
Swiping-card Area
4
Calling Button
5
Loudspeaker
6
Room Number (Customized)
7
Microphone
8
Tamper-proof Button
Video Intercom Door Station·User Manual
3
2.2 Appearance of Door Station (DS-KV8102-XC)
1
2
3
4
5
6
Figure 2-2 Appearance of Door Station
Description of Door Station
Models
No.
Description
DS-KV8102-1C DS-KV8102-2C
1
Microphone
2
Low Illumination Supplement
Light
3
Built-in Camera
4
Swiping-card Area
5
Calling Button
6
Loudspeaker
Video Intercom Door Station·User Manual
4
3 Typical Application
3.1 Typical Application of Door Station (DS-KV8X02-1A)
Please refer to the following figure for typical application of DS-KV8102-1A/ DS-KV8202­1A/ DS-KV8402-1A door station.
Resident 2 Resident 1
Indoor Stations
Network Cable
Door Station
Connect to the LAN of Community via Optical Fiber
Optical Fiber
Main Door Station
Figure 3-1 Typical Application
3.2 Typical Application of Door Station (DS-KV8102-XC)
Please refer to the following figures for typical applications of DS-KV8102-1C/ DS­KV8102-2C door station.
DS-KV8102-1C/ DS-KV8102-2C door station can also work as doorphone. Please refer to the typical application (2).
Video Intercom Door Station·User Manual
5
Resident
Indoor Station
Network Cable
Door Station
Connect to the LAN
of Community via
Optical Fiber
Optical Fiber
Figure 3-2 Typical Application (1)
Resident 2
Resident 2
Resident 2
Resident 2
Indoor Stations
Network Cable
Doorphones
Connect to the LAN of Community
via Optical Fiber
Optical Fiber
4F
3F
2F
1F
-1F/G
Resident 1
Resident 1
Resident 1
Resident 1
Connect to Door Station/ Outer Door Station
Figure 3-3 Typical Application (2)
Video Intercom Door Station·User Manual
6
4 Terminals and Interfaces of Wiring
Please refer to the following figure for terminals and interfaces of door station.
①-⑤
⑥-⑦
⑧-⑨
⑩-⑫
Figure 4-1 Terminals and Interfaces
Table 4-1 Descriptions of Terminals and Interfaces
Terminals and Interfaces
Name
No.
Tag
Description
ALARM IN
1
YELLOW/BLUE
ALARM_1
2
YELLOW/ORANGE
ALARM_2
3
YELLOW/GREEN
ALARM_3
4
YELLOW/BROWN
ALARM_4
5
YELLOW/BLACK
ALARM_GND
Power Supply
6
RED
12V DC Power Supply Input
GND 7 BLACK
Grounding
RS485
8
ORANGE
RS485+
9
YELLOW
RS485-
ALARM OUT
10
PINK
DR_NC
11
BLUE
DR_NO
12
BROWN
DR_COM
LAN
13
LAN
Network Interface
4 IO Input terminals (ALARM_1~ALARM_4) can be set as door magnetic input or door switch key input, and terminal ALARM_GND is for grounding connection;
1 IO Output terminal can be enabled for controlling electric lock or disabled.
Video Intercom Door Station·User Manual
7
5 Installation and Wiring
5.1 Installation of DS-KV8X02-1A Model
To install the door station onto the wall, you are required to utilize a matched gang box.
5.1.1 Gang Box for DS-KV8X02-1A Model
Please refer to the following figures for the dimensions of gang box for DS-KV8102-1A/ DS-KV8202-1A/ DS-KV8402-1A door station.
89
168
49
54
97
50
45
100
73.92
Figure 5-1 Front View & Rear View
The dimension of gang box for model DS-KV8102-1A/ DS-KV8202-1A/ DS-KV8402-1A
door station is: 89 (width) × 168 (length) ×38 (depth) mm.
Video Intercom Door Station·User Manual
8
The dimensions above are theoretical. The actual size can be slightly different from
the theoretical dimension.
5.1.2 Wall Mounting with Gang Box of DS-KV8X02-1A Model
Steps:
1. Take the gang box and screws from the packing box.
2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be 90
(width) ×170 (length) × 38(depth) mm.
3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure
below.
PA4 Screws
Figure 5-2 Insert the Gang Box
4. After fixing the gang box, install the door station into the gang box according to the
direction of the arrow, as shown in the figure below.
Figure 5-3 Insert the Door Station
Video Intercom Door Station·User Manual
9
5. After inserting the door station into the gang box, pull the device downwards to hook
the door station with the gang box.
6. Secure the door station by inserting the fixing screw according to the direction of the
arrow of the figure below.
M4 Screw
Figure 5-4 Secure the Door Station
5.2 Installation of DS-KV8102-XC Model
5.2.1 Installation Plate for DS-KV8102-XC Model
To install the DS-KV8102-XC model onto the wall, an installation plate and a gang box are required.
Please refer to the following figures for the dimensions of the installation plate of DS­KV8102-XC door station.
Video Intercom Door Station·User Manual
10
20
69
18
41.48
9.3
72.7
Hollow Area
91.6
Figure 5-5 Dimensions of Installation Plate
The dimension of gang box for model DS-KV8102-1C/ DS-KV8102-2C door station is:
75 (width) × 75 (length) × 50 (depth) mm.
The dimensions above are theoretical. The actual size can be slightly different from
the theoretical dimension.
5.2.2 Wall Mounting with Gang Box of DS-KV8102-XC Model
Steps:
1. Take the gang box, installation plate and screws from the packing box.
2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be 76
(width) × 76 (length) × 50 (depth) mm.
3. Insert the gang box into the hole, as shown in the figure below.
Figure 5-6 Insert the Gang Box
Video Intercom Door Station·User Manual
11
4. Attach the installation plate to the gang box and align the screw holes of the
installation plate with the screw holes of the gang box.
5. Insert 2 PA4 screws and a KA4 screw into the screw holes to fix the installation plate
onto the gang box.(The KA4 screw is optional.)
PA4 Screws
KA4 Screw
Figure 5-7 Attach the Installation Plate
6. After installing the installation plate, install the door station by inserting the rear
component into the hollow area of the installation plate.
While inserting the door station into the installation plate, incline the device by 5~10°, as shown in the figure below.
Hollow Area
Rear Component
Figure 5-8 Install the Door Station
Video Intercom Door Station·User Manual
12
7. Secure the door station by inserting the fixing screw according to the direction of the
arrow of the figure below.
KM3 Screw
Figure 5-9 Secure the Door Station
5.3 Wiring
5.3.1 Door Lock Wiring
Please refer to the following figure for door lock wiring.
Electric Strike
Magnetic Lock /
Electric Bolt
Figure 5-10 Door Lock Wiring
Loading...
+ 46 hidden pages