DS-2TD2836-xx/V1
Thermal and Optical Network Outdoor Bullet Camera Series
The Hikvision DS-2TD2836-xx/V1 Thermal Bi-
Smart Functions (Thermal Imaging)
•
Adaptive AGC, DDE, 3D DNR, NETD <40 mk (@ 25°
C, F#=1.0)
•
Line Crossing, Intrusion, Region Entrance/Exit
•
Temperature Exception Alarm
•
Advanced Fire Detection
•
Bi-Spectrum Image Fusion, Picture-in-Picture
Preview
Thermal Imaging Module Functions
•
384 × 288 Resolution High Sensitivity Sensor,
Supports Contrast Adjustment
•
Shutter Adjustment in Various Modes
•
3D DNR, 15 Color Adjustable Palettes, Image
Detail Enhancement
•
Mirror Image, Digital Zoom, and Local Output
Spectrum Network Bullet Camera Series is
equipped with built-in GPUs, which support an
intelligent behavior analysis algorithm and can
realize high precision VCA detection and real-time
alarms. It is applied to perimeter defense and fire-
prevention purposes in critical infrastructures
such as communities, villas, construction sites,
factories, automobile dealers, etc. The pre-alarm
system helps discover unexpected events
immediately and protects against property loss.
Includes an integrated de-icing heater.
Available Models:
DS-2TD2836-25/V1: 25 mm thermal lens
DS-2TD2836-50/V1: 50 mm thermal lens
Specifications
Vanadium oxide uncooled focal plane arrays
Minimum Focusing Distance
1/2.8” progressive scan CMOS
Color: 0.001 lux @ (ƒ/1.2, AGC on), B/W: 0.0001 lux @ (ƒ/1.2, AGC on)
IR cut filter with auto switch
Fusion view of thermal view and overlaid details of the optical channel
Combines details of thermal and optical image PIP, overlay thermal image on optical image
VCA (Video Content Analysis)
4 VCA rule types (line crossing, intrusion, region entrance, and region exiting), up to 8 VCA rules.
3 temperature measurement rule types, 21 rules (10 points, 10 regions, and 1 line).
-4° to +302° F (-20° to +150° C)
Dynamic fire point detection, up to 10 fire points detectable.
Visible Light: 60 Hz: 30 fps (1920 × 1080), 30 fps (1280 × 960), 30 fps (1280 × 720)
Thermal: 50 fps (384 × 288)
Visible Light: 60 Hz: 30 fps (704 × 480), 30 fps (352 × 240), 30 fps (176 × 120)
Thermal: 50 fps (384 × 288)
H.265/H.264/MJPEG, H.265+/H.264+ encoding with Baseline/Main/High Profile
G .711u/G.711a/G.722.1/MP2L2/G.726/PCM
IPv4/IPv6, HTTP, HTTPS, 802.1x, QoS, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP,
IGMP, ICMP, DHCP, PPPoE
Up to 32 users, 3 levels: administrator, operator, user
User authentication (ID and PW), MAC address binding, HTTPS encryption, IEEE 802.1x access control,
IP address filtering
2-ch relay outputs, alarm response actions configurable
SD recording/relay output/smart capture/FTP upload/e-mail linkage
1 3.5 mm mic in/line in interface. line input: 2−2.4 V [p-p], output impedance:1K Ω ±10%
Linear level; Impedance: 600 Ω
1 RJ-45 10M/100M Self-adaptive Ethernet interface
Built-in microSD card slot, supports microSD/SDHC/SDXC card (up to 128 GB), supports manual/alarm
recording
1.0 V [p-p]/75 Ω, PAL/NTSC/BNC
Open-ended API, supports ISAPI, HIKVISION SDK, and third-party management platform
IE 9+, Chrome 31−Chrome 44, Firefox 30−Firefox 51, Safari 5.02+ (Mac)
24 VAC ±25%, 12 VDC ±20%, two-core terminal block
PoE (802.3at, class 4)
24 VAC ±25%: 0.92 A, 12 VDC ±20%: 1.9 A, maximum 15 W (22 W with de-icing heater on), PoE (802.3at,
class 4): 42.5 V to 57 V, 0.4 A to 0.5 A
Working Temperature/Humidity
-40° to 140° F (-40° to 60° C), 90% or less (non-condensing)
IP66 standard
TVS 6000V lightning protection, surge protection, voltage transient protection
21.06" × 6.73" × 15.75" (535 mm × 171 mm × 400 mm)
Main Stream
Sub Stream
Protocols
Security Measures
SD Memory Card
Power
Power Consumption
Protection Level
© 2019 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com • www.hikvision.com Rev. 091919NA