HIKVISION DS-2CE56D7T-VPIT User Manual

TURBO HD
D(F)7T Series Dome

Camera

User Manual

UD00416B

User Manual

Thank you for purchasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer.

This manual applies to model DS-2CE56D(F)7T-VPIT.

This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.

0100001060112

Privacy Notice

Surveillance laws vary by jurisdiction. Check all relevant
laws in your jurisdiction before using all this product for
surveillance purpose to ensure that your use of this
product conforms.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and

found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,
including interference that may cause undesired
operation

EU Conformity Statement

This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the

applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.

2006/66/EC (battery directive): This

product contains a battery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentation for specific battery

information. The battery is marked with
this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a
designated collection point. For more information see:
www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.

1 Introduction

1.1 Product Features

This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resolution, low distortion, and low noise,
etc. It is suitable for surveillance system and image
process system.

The main features are as follows:

 High performance CMOS sensor and high resolution

bring high-quality image;

 Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux

with IR;

 IR cut filter with auto switch;
 OSD menu, parameters are configurable;
 Auto white balance and internal synchronization;
 SMART IR mode;
 True WDR;
 Advanced 3-axis design meets different installation

requirements;

1.2 Overview

Mounting Base

Video Cable

DC 12V Power Cord

P Position
Bracket

IR LED

Lens

Black Liner

Safety Rope

Bubble

Figure 1-1 Overview of Dome Camera

2 Installation

Before you start:

 Please make sure that the device in the package is in

good condition and all the assembly parts are
included.

 Make sure that all the related equipment is power-off

during the installation.

 Check the specification of the products for the

installation environment.

 Check whether the power supply is matched with

your required output to avoid damage.

 Please make sure the wall is strong enough to

withstand three times the weight of the camera and
the mounting.

 If the wall is the cement wall, you need to insert

expansion screws before you install the camera. If the
wall is the wooden wall, you can use self-tapping
screw to secure the camera.

 If the product does not function properly, please

contact your dealer or the nearest service center. Do
not disassemble the camera for repair or
maintenance by yourself.