Hikvision DS-2CD2125G0-IMS-2-8mm, DS-2CD2143G0-IB-4mm, DS-2CD2185G0-IMS-6MM Quick Start Guide

0

Network Dome Camera

Quick Start Guide

Network Dome Camera·Quick Start Guide

1

Quick Start Guide

COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd.

ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.
Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the
Manual.

About this Manual

This Manual is applicable to Network Dome Camera.
The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in
the company website

(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks and
logos mentioned below are the properties of their respective owners.

Network Dome Camera·Quick Start Guide

2

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION,
ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO
YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Dome Camera·Quick Start Guide

3

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

For products that support Wi-Fi or cellular data:

(Marked with a “W”, “GLT”, “GLE”, “GLF”, “GE”, “GT” or “GW” in the

Part C of a product model.

Product Model Example: Part A-Part B-Part C. Part C is optional.)

FCC Information

Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.

Network Dome Camera·Quick Start Guide

4

—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied
accessories too are marked with "CE" and comply

therefore with the applicable harmonized European
standards listed under the Radio Equipment Directive 2014/53/EU,
the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info

Network Dome Camera·Quick Start Guide

5

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier
or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.

This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference

that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential

Network Dome Camera·Quick Start Guide

6

radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful
communication.

Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d'un type et d'un
gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.

This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale
de 20 cm entre le radiateur et votre corps.

For products that do not support Wi-Fi or cellular data:

FCC Information

Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency

Network Dome Camera·Quick Start Guide

7

energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.

Network Dome Camera·Quick Start Guide

8

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier
or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.

Safety Instruction

These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Network Dome Camera·Quick Start Guide

9

Warnings

● For device with this sticker, this device is intended for installation

in a restricted access location, access can only be
gained by service persons or by users who have

been instructed about the reasons for the
restrictions applied to the location and about any precautions
that shall be taken.

● In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please
refer to technical specifications for detailed information.

● Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 12 VDC according to
the IEC60950-1 standard. Please refer to technical specifications
for detailed information.

● Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

Warnings Follow these
safeguards to prevent
serious injury or death.

Cautions Follow these
precautions to prevent
potential injury or material
damage.

Network Dome Camera·Quick Start Guide

10

● Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.

● If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact
the service center.

● Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

Cautions

● If the camera fails to synchronize the local time with that of the

network, you need to set the camera time manually. Visit the
camera (via web browser or client software) and enter the
system settings interface for the time settings.

● Make sure the power supply voltage is correct before using the

camera.

● Do not drop the camera or subject it to physical shock.

● Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.

● Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.

Network Dome Camera·Quick Start Guide

11

● The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of sensor
will not be exposed to the laser beam.

● Do not place the camera in extremely hot, cold (the operating

temperature shall be -30°C to +60°C, dusty or damp locations,
and do not expose it to high electromagnetic radiation.

● To avoid heat accumulation, good ventilation is required for

operating environment.

● Keep the camera away from liquid while in use.

● While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

● Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly
according to their average enduring time. The average time
varies because of differences between operating environment
and using history, so regular checking is recommended for all the
users. Please contact with your dealer for more details.

● Improper use or replacement of the battery may result in hazard

of explosion. Replace with the same or equivalent type only.
Dispose of used batteries according to the instructions provided
by the battery manufacturer.

L’utilisation ou le remplacement inadéquats de la pile peuvent
entraîner un risque d’explosion. Remplacez-la par le même type
ou l’équivalent du même type seulement. Jetez les piles
usagées conformément aux directives fournies par le fabricant
de la pile.

Network Dome Camera·Quick Start Guide

12

● If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)

Network Dome Camera·Quick Start Guide

13

Table of Contents

1 Appearance Description ............................................................... 14

Type I ............................................................................ 14

Type II ........................................................................... 15

Type III .......................................................................... 17

Type IV .......................................................................... 19

Type V ........................................................................... 20

2 Installation .................................................................................... 22

Memory Card Installation .............................................. 23

Ceiling Mounting ........................................................... 24

Mounting with Brackets ................................................ 29

Waterproof Measures ................................................... 39

3 Set the Network Camera over the LAN ......................................... 42

Wiring ........................................................................... 42

Activate the Camera ...................................................... 43

Modify the IP Address ................................................... 46

4 Access via Web Browser ............................................................... 48

5 Operate via Hik-Connect App ....................................................... 50

5.1 Enable Hik-Connect Service on Camera ......................... 50

5.2 Hik-Connect Setup......................................................... 53

5.3 Add Camera to Hik-Connect .......................................... 53

5.4 Initialize the Memory Card ............................................ 55

Network Dome Camera·Quick Start Guide

14

1 Appearance Description

Type I

1
2

3

4

7
8
9

10

5

6

Overview of Type I Camera

Description of Type I Camera

No.

Description

No.

Description

1

Mounting Base

2

Horizontal Stand

3

Vertical Stand

4

Bubble

5

Network Interface

6

Power Interface

7

IR LED 8 Lens

9

Black Liner

10

Safety Rope

Network Dome Camera·Quick Start Guide

15

Note:

Press RESET about 10s when the camera is powering on or rebooting
to restore the default settings, including the user name, password, IP
address, port No., etc.

Type II

5

1

2

3

4

9

6

7
8

10

11*
12*

Overview Of Type II Camera

Network Dome Camera·Quick Start Guide

16

Description of Type II Camera

No.

Description

No.

Description

1

Mounting Base

2

Horizontal Stand

3

Vertical Stand

4

Bubble

5

Network Interface

6

Power Interface

7

IR LED 8 Lens

9

Black Liner

10

Safety Rope

11*

Audio Interface (Only

supported by the

camera with “-S” in its

model)

12*

Alarm Interface (Only

supported by the

camera with “-S” in its

model)

Notes:

● The items marked with the "*" are only supported by certain

camera models.

● Press RESET about 10s when the camera is powering on or

rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.

Network Dome Camera·Quick Start Guide

17

Type III

5

7

6

8

1

4

3*

DC12VIN

2*

9

10

Overview Of Type III Camera