Hikvision DS-1661ZJ User Manual

DS-1661ZJ

Features:

 Aluminum alloy material with surface spray

treatment

 General design for indoor/outdoor  Design of cable entrance hole  Better water proof with rubber pad design

 With safety rope, the assembling is safer and more

convenient

Dimension:

Order model:

DS-1661ZJ

Parameters:

Model

Parameter

DS-1661ZJ

Pendent Mounting Bracket In/Outdoor

Color

Hik white

Feature

Suitable for speed dome pendent

mounting

(not suitable for DS-2AE-714）

Material

Aluminum alloy

Dimension

Φ116.5×200mm

Weight

600g

Notice:

 Pay attention to the color matching when select bracket  The bracket should be installed on the flat surface of a

wall

 The wall must be capable of supporting more than 3

times the total load of the camera and the mount.

 The maximum load capacity of the mount is 30KG

Indoor

Outdoor

1 2

Unit：mm

Pendent Mounting Bracket In/Outdoor

Installation steps:

① Choose the appropriate wall to mount the ceiling, ② Twist and fix the screwed pipe after threading

and rubber blanket should be added when assembling outdoors

③ Fasten the safety rope, thread the line and assemble the ④ Fasten the snap joint fixing screw

A: Waterproof rubber blanket B: Screw hole

speed dome

C: Safety rope hook D: Safety rope E :Snap joint fixing screw.

Note: The figure of Speed Dome in “Installation Step” is only for your reference; please adhere to our real products.