1
2
3
4
5
6
7
8
ON/OFF
Play/Pause
Next
Previous
FM
12
9
10
11
USB Out
USB In
Line In
1. Charge completely before rst use
Completely charge your WAE Outdoor Rush
speaker before using it for the rst time.
Connect the Micro-USB connector on the
Micro-USB to USB cable (12) to the Micro-USB
port (11) on the WAE Outdoor Rush speaker,
and the other end of the cable to the USB port
on a computer or on a smartphone/tablet USB
power adapter (5V/1A)*.
The standard charging time is 3.5 hours.
While charging, the charge indicator (1) ashes
green. When the battery is fully charged, the
charge indicator (1) stops ashing.
When the battery level is low, the charge
indicator (1) ashes.
2. Getting started with your speaker
To power on your WAE Outdoor Rush speaker,
press the on/o button (1). To power o the
speaker, press the on/o button (1) for 2
seconds.
When used for the rst time, your WAE Outdoor
Rush speaker is ready for pairing: the Bluetooth®
indicator (7) ashes blue.
- On your smartphone/tablet, MP3 player or
computer, enable the Bluetooth® wireless
technology function, and search for available
Bluetooth® devices.
- Select WAE Outdoor Rush in the list of available
Bluetooth® devices and carry out the pairing (if
an access code is required, enter 0000).
Once the devices are paired and connected, the
Bluetooth® indicator (7) stays lit up in blue. You
are now ready to play your music.
3. Volume and music controls
The volume + and volume – buttons (2 and 3)
let you control the volume of your WAE Outdoor
Rush speaker, independently of the controls on
your Bluetooth® device (smartphone, tablet,
MP3 player, computer…).
For devices supporting Absolute Volume
(AVRCP 1.4) mode, their volume level is directly
controlled by the WAE Outdoor Rush speaker.
4. Playing music on the WAE
Outdoor Rush from another music
source
If you want to play music from a dierent
Bluetooth® music source (smartphone, tablet,
lecteur MP3, PC...) than that currently used,
press and hold the Bluetooth® button (7) for 3
seconds until it beeps to disconnect the
connected device. The Bluetooth® indicator (7)
ashes blue to indicate that you can now pair
and connect a new Bluetooth® device.
5. Clearing the saved list of paired
devices
Your WAE Outdoor Rush speaker can save
pairing information for up to 8 devices. A long
press (8 seconds) on the Bluetooth® button (7)
lets you clear the saved list of paired devices.
6. FM radio
Press the FM Radio button (8) to enable the FM
radio function: the FM Radio indicator (8) lights
up in white.
When used for the rst time, an automatic scan
is carried out: the automatic scan will save all
detected stations, and will start playing the rst
station when the scan is complete. You can then
switch between the dierent stations using the
Next (5) and Previous (6) buttons.
Pressing the Play/Pause button (4) enables or
disables the mute mode.
To launch a new scan for stations, press and
hold the FM Radio button (8) for 3 seconds.
During a scan, the indicator (8) ashes white.
You can save up to 40 stations.
Download and check out all the FM
functionalities thanks to the WAE Music app:
display frequencies, stations list…
In the US only: in order to improve the quality of
the FM reception, you need to download and
1. On/o button and charge indicator
2. Volume + button
3. Volume – button
4. Play/Pause/Mute button
5. Next button
6. Previous button
7. Bluetooth® button and indicator
8. FM Radio button and indicator
9. Line input connector
10. USB port
11. Micro-USB port
12. Micro-USB to USB cable
install the WAE Music app. Once connected to
the WAE Outdoor Rush, from the FM panel, go
to the advanced settings and change the
EU/US setting to US.
7. Line input
You can connect your MP3 player directly to
the speaker’s line input connector (9).
8. Standby mode
When the WAE Outdoor Rush speaker plays
no music (via the Bluetooth® function or the
FM radio) for 10 minutes or more, it switches
to standby mode in order to save battery
power. You can “wake it up” from standby
mode by pressing the on/o button (1) or
using the
WAE Music app
.
9. Charging function**
When the Bluetooth® mode is enabled (only in
this mode), you can charge your smartphone
by connecting it to the USB port (10).
You can reduce the charging time by turning
o the Bluetooth® function: to do so, press the
Bluetooth® button (7) twice. When your device
is fully charged, press the Bluetooth® button (7)
twice again to enable the function.
Your WAE Outdoor Rush speaker features a
USB port (10), allowing you to charge an
external device (smartphone, MP3 player).
The charging power level provided by the
speaker is 500 mA, allowing you to charge
most smartphones. You cannot use the
speaker to charge a tablet.
10. IP67 protection
Make sure that the protective cap is fully
screwed on, in order to ensure that the
product is water- and dust-tight.
Use the tool attached to the wrist strap to
lock/unlock the protective cap.
* Not included.
** A specic cable (not included) may be
required.
ENGLISH
Download the
WAE Music app
www.hercules.com
MAIN PANEL WITH WAE OUTDOOR RUSH SPEAKER CONNECTED
Main panel
Main panel in standby mode
OPTIONS
AUDIO
FM
MUSIC PLAYER
SOUND
SETTINGS
USER MANUAL
SPEAKER
OPTIONS
AUTO SCAN
FMSTANDBY
Access information
regarding the app
version, rmware
version, standby
mode, etc.
Information
regarding the WAE
Outdoor Rush
speaker's battery
level.
Open the music
player.
Scan for the WAE Outdoor
Rush speaker when the
connection has been
lost.
This button is only available when
the connection has been lost.
Open the FM
control panel.
Remotely turn on
the WAE Outdoor
Rush speaker/put it
in standby mode.
Standby mode aects the
speaker's battery life.
Open the equalization
panel
(in Bluetooth® mode only).
Access the online
manual.
Loading...