
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties
to any products.
Heraeus Sensor Technology GmbH, Reinhard- Heraeus- Ring 23, 63801 Kleinostheim, Germany
Phone: +49 (0) 6181/35-8098, Fax: +49 (0)6181/35-8101, E-Mail: info.HSND@Heraeus.com Web: www.heraeus-sensor-technology.com
Name of document: 30910072 Index 00
Status: 02/2014
Platinum Resistance Temperature Detector PCB 1325.4 (0805)
This platinum temperature sensor on a printed circuit board has been specially designed for use in calorimetry. When
designing these sensors, the stringent requirements of this sector with regard to precision, long-term stability, cost
minimisation as well as the option for fully automatic further processing were of prime concern.
The temperature sensor in an SMD model forms the measurement active element on a PCB. The chip is connected with
terminal faces with a thin conductive path in order to reduce heat dissipation and to prevent corruption of the measuring
results. As a cable set sensor, it is suitable for a wide range of applications within a temperature range of 0°C to 150°C.
Tolerance
DIN EN 60751
1996-07
Tolerance
DIN EN 60751
2009-05
Dimensions in mm
L1 L2 B
+1 -2 -0,2
0.1 K after 1000 h at 150°C energized with:
Pt 1000: 0.3 mA
Pt 500: 0.7 mA
1000: 0.1 to 0.3mA
500: 0.1 to 0.7mA
Self-heating
Track Resistance
0.15 K/mW in ice water
Meander: 0,07
Temperature change resistance
0.1 K after 1000 change 0°C/150°C in air
Cu connection pad with chem. Sn surface
1) Chip is soldered lead free
2) Connection pads are ready for lead free
soldering
Use unprotected only in dry environments
water (v= 0.4m/s): t
0,5
= 0.05s t
0,9
= 0.10s
air (v=2m/s): t
0,5
= 1.5s t
0,9
= 5.0s
Supplied in plastic container
Other tolerances and values of resistance are
available on request.