© 2007 Henny Penny Corporation, Eaton, OH 45320 USA Revised 05/06/13
ODS 300 fryer oil disposal system
Fryer Oil Disposal System
The unappealing job of draining,
Continuing product improvement may subject specifications to change without notice.
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
Drain pan width
12.13 in (327 mm)
43.50 in (1105 mm) to discharge
Standard Features
transporting and disposing of spent
frying oil becomes much easier with
the Henny Penny ODS 300.
Simply roll out the fryer filter pan,
roll in the ODS 300 and dra in. No
tilting, stoopi ng or lifti ng in vol ved. A
hinged lid latches shut to form a tight
seal around the dra in pan, preve nti ng
spills during transport.The load is
easily transported on two large 7 in
(178 mm) rear wheels.
A one-piece discharge pipe swings
out to either side for convenient
disposal. The powerful manual pump
is located at the ideal height, making
pump out fast and easy.
• Powerful manual pump empties 50 lb
(23 kg) of oil in less than a minute
• Low profile, 8 in (203 mm) pan height
allows unit to roll under nearly any
fryer for direct draining
• Check valve insures consistent pump
priming
• One-piece discharge pipe swings at
height to clear most containers
• Easy-grip retainer screw locks swing
pipe into any convenient position
• Hinged drain pan lid latches closed
over perimeter seal to prevent spills
• Swivel casters in front, large 7 in
(178 mm) rear wheels for smooth,
stable transport
• 2-year parts and labor warranty
Options
• 60 in (1524 mm) drain hose with
connection
Crated
8.00 in (203 mm) drain pan height
PO Box 60 Eaton OH 45320 USA
+1 937.456.8400 800.417.8417
+1 937.456.8434 Fax 800.417.8434 Fax
+1.800.417.8405 Technical Support
www.hennypenny.com
Oil capacity 50 lb (23 kg)