Henny Penny HHC-908 User Manual
Standard Features
Durable, high-quality stainless steel
construction, interior and exterior.
Precise thermostatic controls and
dial thermometer.
Easy to see ON/OFF and cycle
temperature lights.
New standard adjustable racking
system increases capacity and pan
variety.
Large stainless steel water pan.
Manual slide vent humidity control.
Dual heavy-duty blower motors.
Ventilated side racks.
Partial pan removal for convenient
loading and unloading.
Fully insulated doors, sidewalls and
control module.
Full perimeter door gasket.
Self-closing, lift-off doors stay open
past 90 degrees.
Magnetic door latch and heavy-duty
plated hinges.
Sturdy aluminum base and
permanent center braces for added
strength.
Built-in utility handle included on
solid back unit.
Standard 5 in. (127 mm) casters,
two locking.
MODEL HHC-908 half-size
Please specify desired configuration
Shelf runners (see back)
Standard
Original
Euro rack
Door hinge
Right OR Left
Style
Pass-through OR solid back
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 06/27/12
Heated holding cabinet
Institutional
PROJECT QUANTITY ITEM NO
General Information
Henny Penny heated holding
cabinets are designed to hold a wide
range of cooked foods at safe
temperatures for long periods of time
prior to serving.
The 900 series holding cabinets
were originally developed to hold
large quantities of pressure-fried
chicken for long periods of time
without sacrificing freshness or
presentation. Dual fans, ventilated
side racks allow hot, moist air to
circulated evenly throughout the
cabinet and keep practically any
menu item hot and tasty until
serving. And that translates into
higher food quality and less waste
throughout the day.
Henny Penny holding cabinets
also improve your equipment and
labor utilization. With longer holding
periods, operators can cook in
quantity before peak periods and
stock heated display cases directly
from the holding cabinet.
The HHC-908 is a half-size mobile
heated holding cabinet with extra
width and depth to handle different
pan orientations and sizes common in
institutional kitchens. The half-size
units provide excellent holding
capabilities for lower volume and cost.
Several racking configurations are
available.
Additional standard features such
as stainless steel construction, fully
insulated doors and cabinet walls,
and self-closing doors help protect
food quality, reduce waste and
provide for more efficient workflow.
Heated Holding Cabinet model HHC-908
with 5-inch (127 mm) casters and extra
width, depth and racking options for
institutional kitchens.
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
29 1/4 in. (743 mm)
Pan capacity
Adjustable racking for standard sheet pans
and full-size steam table pans. Please check
desired runner style.
Standard Henny Penny
5 pairs on 3 3/4 in. (86 mm)
centers
Original Henny Penny
4 pairs on 4 1/8 in. (105 mm)
centers
Euro Rack
3 pairs on 5 1/2 in. (140 mm)
centers
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 06/27/12
Laboratory certifications
Heated holding cabinet
Institutional
PROJECT ITEM NO
MODEL HHC-908 half-size
Dimensions
Height: 37 in. (940 mm)
Width: 29 1/4 in. (743 mm)
Depth: 35 3/4 in. (908 mm)
Required clearances: N/A
Crated dimensions
Length: 39 1/2 in. (1000 mm)
Depth: 39 1/2 in. (1000 mm)
Height: 34 3/4 in. (880 mm)
Volume: 31.4 cu. ft. (0.88 m³)
Crated weight: 249 lbs. (113 kg)
Water connections: N/A
Heating
Thermostat controlled, 160-210F (71-99C)
Humidity: 1 gallon (3.8 liter) water pan
FRONT
35 3/4 in. (908 mm)
37 in.
(940 mm)
Electrical
Bidding Specifications
Provide Henny Penny Model HHC-908
institutional half-size Heated Holding
Cabinet. Units are designed to hold hot
foods in quality condition at safe
temperatures for long periods of time.
Units are designed with extra width, depth
and racking options for varying pan
configurations in institutional kitchens.
Unit shall have electro-mechanical
thermostat and temperature controls.
Provide choice of right or left-hand door,
solid back or pass-through design.
Provide choice of racking configurations for
3, 4 or 5 pans.
Unit is 300 grade stainless steel
construction throughout.
Unit features full perimeter door gasket and
fully insulated sidewalls and control module.
Two heavy-duty blower motors and ventilated
side racks.
Unit includes built-in utility handle on solid
back models.
Unit comes with 4 casters 5 in. (127 mm), two
are locking.
PLAN
Power cord from back or top
Volts
Phase
Cycle/Hz
Watts
Amps
Wire
120 1 50-60
2086
17.0
2+G
230 1 50
1900
8.3
1NG
240 1 50-60
2086
8.7
2+G
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
24 Hour Technical Support:
Henny Penny Technical Service
800.417.8405
technicalservices@hennypenny.com
Continuing product improvement may subject specifications to change without notice.
Power cord supplied. Plug included for 120V USA
and Canada, only
Plug type: NEMA 5-20P (US)
G
W
Plug type: NEMA 5-30P (Canada)
Loading...