Henny Penny HHC-136 Service Manual

Henny Penny

Heated Holding Cabinet

Model HHC-136

TECHNICAL MANUAL

LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT

Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original

purchaser only for Henny Penny appliances and replacement parts:

NEW EQUIPMENT: Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective in
material or workmanship within two (2) years from date of original installation, will be repaired or replaced without
charge F .O.B. factory , Eaton, Ohio, or F .O.B. authorized distributor . Baskets will be repaired or replaced for ninety (90)
days from date of original installation. Lamps and fuses are not covered under this Limited W arranty. To validate this
warranty, the registration card for the appliance must be mailed to Henny Penny within ten (10) days after installation.

FILTER SYSTEM: Failure of any parts within a fryer filter system caused by the use of the non-OEM filters or
other unapproved filters is not covered under this Limited Warranty.

REPLACEMENT PARTS: Any appliance replacement part, except lamps and fuses, which proves to be defective in
material or workmanship within ninety (90) days from date of original installation will be repaired or replaced without
charge F .O.B. factory , Eaton, Ohio, or F .O.B. authorized distributor .

The warranty for new equipment covers the repair or replacement of the defective part and includes labor charges and

maximum mileage charges of 200 miles round trip for a period of one (1) year from the date of original installation.

The warranty for replacement parts covers only the repair or replacement of the defective part and does not include any
labor charges for the removal and installation of any parts, travel, or other expenses incidental to the repair or replacement of
a part.

EXTENDED FRYPOT WARRANTY: Henny Penny will replace any frypot that fails due to manufacturing or workmanship
issues for a period of up to seven (7) years from date of manufacture. This warranty shall not cover any frypot that fails due to
any misuse or abuse, such as heating of the frypot without shortening.

0 TO 3 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will
be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no cost or
provide a new or reconditioned replacement fryer at no cost.

3 TO 7 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will
be replaced at no charge for the frypot only . Any freight charges and labor costs to install the new frypot as
well as the cost of any other parts replaced, such as insulation, thermal sensors, high limits, fittings, and
hardware, will be the responsibility of the owner.

Any claim must be presented to either Henny Penny or the distributor from whom the appliance was purchased. No
allowance will be granted for repairs made by anyone else without Henny Penny’s written consent. If damage occurs during
shipping, notify the sender at once so that a claim may be filed.

THE ABOVE LIMITED WARRANTY SETS FOR TH THE SOLE REMEDY AGAINST HENNY PENNY FOR ANY BREACH
OF W ARRANTY OR OTHER TERM. BUYER AGREES THA T NO OTHER REMEDY (INCLUDING CLAIMS FOR ANY INCI­DENT AL OR CONSEQUENTIAL DAMAGES) SHALL BE AV AILABLE.

The above limited warranty does not apply (a) to damage resulting from accident, alteration, misuse, or abuse; (b) if the
equipment’s serial number is removed or defaced; or (c) for lamps and fuses. THE ABOVE LIMITED WARRANTY IS EX­PRESSL Y IN LIEU OF ALL OTHER W ARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANT ABILITY AND FIT­NESS, AND ALL OTHER W ARRANTIES ARE EXCLUDED. HENNY PENNY NEITHER ASSUMES NOR AUTHORIZES ANY
PERSON TO ASSUME FOR IT ANY OTHER OBLIGA TION OR LIABILITY.

Revised 01/01/07

FM06-037

Revised 02-15-07

Model HHC-136

SECTION 1. PARTS INFORMATION

1-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model

HHC-136.

1-2. GENUINE P AR TS Use only genuine Henny Penny parts in your fryer . Using a part of

lesser quality or substitute design may result in damage to the unit or
personal injury .

1-3. WHEN ORDERING P ARTS Once the parts that you want to order have been found in the parts

list, write down the following information:

Item Number 2
Part Number
Description

71072 Example:

Panel - Upper Flip Door - 1/3 Size

From the data plate, list the following information:

Product Number HHC136.0
Serial Number 0001 Example:
Voltage 240

1-4. PRICES Y our distributor has a price parts list and will be glad to inform you

of the cost of your parts order.

1-5. DELIVERY Commonly replaced items are stocked by your distributor and will

be sent out when your order is received. Other parts will be
ordered, by your distributor, from Henny Penny Corporation.
Normally , these will be sent to your distributor within three working
days.

1-6. WARRANTY All replacement parts (except lamps and fuses) are warranted for

90 days against manufacturing defects and workmanship. If dam­age occurs during shipping, notify the carrier at once so that a claim
may be properly filed. Refer to warranty in the front of this manual
for other rights and limitations.

1-7. RECOMMENDED

SPARE P ARTS FOR
DISTRIBUTORS

Recommended replacement parts, stocked by your distributor, are
indicated with

√√

√ in the parts lists. Please use care when ordering

√√

recommended parts, because all voltages and variations are
marked. Distributors should order parts based upon common
voltages and equipment sold in their territory .

3-1 806

Model HHC-136

Item No. Part No. Description Quantity per Door

Flip-Up Door Assemblies
1 71466 Assy - Door - Flip - RH - 1/3 Size 1
1 71467 Assy - Door - Flip - LH - 1/3 Size 1
2 71072 Panel - Upper Flip Door - 1/3 Size 1
3 71073 Panel - Lower Flip Door - 1/3 Size 1
4 71308 Assy - Hinge - Panel - Door - Flip 2
5 71067 Rod - Flip Door 2
6 71316 Spring - Flip Door 2
7 70768 Cam - Flip Door - RH 2
7 70769 Cam - Flip Door - LH 2
8 73320 Extrusion - Flip Door 2
9 SC01-254 Screw - #8-32 x 5/8 PH FHD SS 4

10 L W02-006 Lockwasher - Internal - #8 S 4

11 NS03-024 Nut - #8-32 Low Crown Acorn - B P 4
12 SC01-186 Screw - #10-32 x 1-3/4 PH FHD SS 4
13 14272 Kit - HC-900 Door Handle 1
14 14271 Kit - HC-900 Door Hinge 2
15 SC01-088 Screw - #8-32 x 1 PH FHD S 4
16 71056 W eld Assy - Flip Door Frame - RH - 1/3 Size 1
16 71057 W eld Assy - Flip Door Frame - LH - 1/3 Size 1

806 3-2

Model HHC-136

Item No. Part No. Description Quantity

Electrical Components
1 14209 Kit - Thermostat 1
2 16624 Light - Indicator 2
3 14250 Kit - Thermometer 1
4 22198 Switch - Power DPST 1
5 63361 Motor - Blower - 240V 1
6 72149 Heater - 120V-600W 2

o

7 18201 Sensor - High Limit - 335

F2

8* 63360 Blade - Fan - 5-3/8” 1

*not shown

3-3 806

Model HHC-136

Item No. Part No. Description Quantity

Front V iew
1 72228 Decal - HHC136 1
2 25863 Knob - Thermostat 1
3 73597 Assy - W ater Pan 1
4 73093 Assy - Air Duct 2
5 25793 Gasket - Door 2

806 3-4

Model HHC-136

3-5 806