Henny Penny HC-900 Installation Manual

5. Peel off any protective covering from the exterior
of the cabinet.

eated Holding Cabinet is now ready for

location and set up.

e certain to save any literature that is packed inside the

cabinet.
The HC-900 should be placed in an area where the doors

can be opened without interruption and loading and
unloading of product is easy.
cabinet must be level.

Do not set anything on top of the cabinet that might close
off the vent holes.

or proper operation, the

eated Holding Cabinet is available from the factory
20 VAC unit. The data plate, located on the side

of the module, will specify the correct electrical supply.

e unit requires a grounded receptacle with a separate

ctrical line protected by a fuse or circuit breaker of

the proper rating.

The cabinet must be adequately and safely grounded
according to local

possibility of electrical

for electrical ratings for t

er

05148

el

120 1940

to prevent the

o the table below

16.2