Henny Penny HB-121 Operation Manual

HB-121

SECTION 1. INTRODUCTION

1-1. HAND The Henny Penny Hand Breader/Sifter is a compact breading table

BREADER/SIFTER with a high speed sifter which saves time, breading, and money by
HB-121 separating dough balls from the breading. The unit is available with

various optional equipment making it adaptable to each store’s
individual needs.

1-2. PROPER CARE As in any unit of food servicing equipment, the multipurpose holding

cabinet does require care and maintenance. Requirements for the
maintenance and cleaning are contained in this manual and must
become a regular part of the operation of the unit at all times.

Before using the HB-121, it should be thoroughly cleaned in
accordance with the instructions contained in this manual.

1-3. FEATURES • Powerful 1/4 hp totally enclosed motor gives fast, thorough sifting

• Stainless steel sifting basket under breading lug gently separates
dough balls from flour as it sifts uniformly and automatically into
the bottom lug

• Stainless steel unit is rugged and can be quickly disassembled for
easy cleaning

• Compact design requires little floor space, yet the work flow pattern
contributes to high production capability

• All moving parts are enclosed for greater safety

• U.L., C.S.A. approved

• Left to right flow of operation available

203 1-1

HB-121

1-4. DESCRIPTION The HB-121 is a stainless steel table and cabinet containing a

stainless steel sifting basket. The unit comes with two breading lugs
that holds the breading, tray rack, pan support, dip pot for dipping
product before breading, holder for dip container, plastic dip
tray to help prevent dripping onto floor, and a back splash to help
keep area behind breader clean. It is equipped with dependable
drive mechanism, adjustable casters, and an ON/OFF switch for
customer convenience. Dimensions are 36-3/4” (93.35 cm) wide
(top), 67-12” (171.45 cm) overall width from dip pot to fully
extended tray rack, 16-3/4” (42.55 cm) deep (top), 26” (66.00
cm) overall depth from face of top to back of back splash, 35-1/2”
(90.17 cm) high to top, and 46-1/2” (118.11 cm) to top of back
splash. Shipping weight is 140 lbs. (63.5 kg.).

1-5. ASSISTANCE Should you require outside assistance, just call your local indepen-

dent distributor in your area, call Henny Penny Corp. at
1-800-417-8405 toll free or 1-937-456-8405, or go to Henny
Penny online at www.hennypenny.com.

1-6. SAFETY The only way to ensure safe operation of the Henny Penny Hand

Breader/Sifter is to fully understand the proper installation,
operation, and maintenance procedures. The instructions in this
manual have been prepared to aid you in learning the proper
procedures. Where information is of particular importance or is
safety related, the words NOTICE, CAUTION or WARNING are
used. Their usage is described below:

SAFETY ALERT SYMBOL is used with DANGER,
WARNING, or CAUTION which indicates a personal injury
type hazard.

NOTICE is used to highlight especially important information.

CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in property damage.

CAUTION used with the safety alert symbol indicates a
potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.

1-2 203