Henny Penny HB-11 Operator’s Manual

Henny Penny

Hand Breader/Sifter

Model HB-11

Operator MANUAL

TABLE OF CONTENTS

Section Page

Section 1. MAINTENANCE ..................................................................................................... 1-1

1-1. Introduction...................................................................................................... .1-1

1-2. Safety ............................................................................................................... 1-1

1-3. Replacement of Belt ..........................................................................................1-2

1-4. Replacement of Mandrel.................................................................................... 1-2

1-5. Replacement of Motor....................................................................................... 1-3

1-6. Replacement of Switch ..................................................................................... 1-4

1-7. Replacement of Rod End Bearing .................................................................... 1-5

1-8. Replacement of Push Rod Bearing ................................................................... 1-6

1-9. Replacement of Sifter Bearing ......................................................................... 1-6

1-10. Wiring Diagrams............................................................................................. 1-7

FM05-077-B

7/10/15

1-1. INTRODUCTION Electrical and mechanical components which may require servicing

are contained beneath the cover plate assembly. Outlined below are
step by step procedures when replacing parts becomes necessary.
Refer to exploded drawing in this manual.

1-2. SAFETY The only way to ensure safe operation of the Henny Penny Hand

Breader/Sifter is to fully understand the proper installation, operation,
and maintenance procedures. The instructions in this manual have
been prepared to aid you in learning the proper procedures. Where
information is of particular importance or is safety related, the words

NOTICE, CAUTION or WARNING are used. Their usage is
described below:

SAFETYALERT SYMBOL is used with DANGER, WARNING,
or CAUTION which indicates a personal injury type hazard.

NOTICE is used to highlight especially important information.

CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.

CAUTION used with the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.

203

1-1