Heatmiser RC2-WTS1 User Manual

1

Model: RC2-WTS

Model: RC2-WTS

2

Wireless Receivers

Model: RC2-WTS

Wireless Receivers1

2Model: RC2-WTS

Table of Contents

1

2

3-4

5-6

7

8

9-10

Product Image

Table of Contents

Installation Procedure

Pairing Instructions

LED’s Explained

Wiring Diagram

Notes

3

Wireless Receivers

Installation Procedure

This receiver is designed to be ush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.

Step 1

Carefully separate the front half of the receiver from the back plate by placing a
small at head terminal driver into the slots on the bottom face of the receiver.

Step 2

Place the receiver front somewhere safe.

Terminate the receiver as shown in the diagrams on page 8 of this booklet.

Step 3

Screw the receiver back plate securely into the back box.

Step 4

Clip the front of the receiver back onto the receiver back plate.

Please read the instructions fully so you get the best from our product.