Heatmiser RC1-WTS User Manual

1

Model: RC1-WTS

Model: RC1-WTS

2

Wireless Receivers

2Model: RC1-WTS

Table of Contents

1

2

3-4

5

6-8

9-10

Product Image

Table of Contents

Installation Procedure

LED’s Explained

Wiring Diagrams

Notes

Model: RC1-WTS

Wireless Receivers1

43

Wireless Receivers Model: RC1-WTS

1

Installation Procedure

This receiver is designed to be ush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.

Step 1

Carefully separate the front half of the receiver from the back plate by placing a
small at head terminal driver into the slots on the bottom face of the receiver.

Step 2

Place the receiver front somewhere safe.

Terminate the receiver as shown in the diagrams on pages 6-9 of this booklet.

Step 3

Screw the receiver back plate securely into the back box.

Step 4

Clip the front of the receiver back onto the receiver back plate.

3 4

Please read the instructions fully so you get the best from our product.

2