Heatmiser neoStat-hw V2 Instruction Manual

1

Series

Model:

Available in: Sapphire Black and Glacier White

2

Table of Contents

1

2

3-4

5

5-6

6

7-8

9

9

10

11

12

13

14

15

Product Image

Table of Contents

Installation Procedure

Pairing the neoHub

Pairing the neoStat-hw

What is a Mesh Network?

Time Clock Mode

Hot Water Time Clock Display

Locking the neoStat-hw

Unlocking the neoStat-hw

Setting the Clock

Setting the Hot Water Times

Hot Water Boost

Standby

Holiday

Adjusting the Optional Settings

Optional Features Explained

Optional Settings Features Table

Factory Reset

Wiring Diagrams

Notes

16

16

17

18 - 19

20-22

3

Series

Installation Procedure

This neoStat-hw V2 is designed to be flush mounted and requires a back box of
35mm (minimum depth) to be sunk into the wall prior to installation.

Step 1

Remove the screw from the bottom face of the time clock then carefully separate
the front half from the back plate.

Step 2

Place the time clock front somewhere safe.
Terminate the time clock as shown in the diagrams on pages 18-19 of this booklet.

Step 3

Screw the time clock back plate securely into the back box.

Step 4

Clip the front of the time clcok onto the back plate, securing it in place with the
retaining screw.

Do

Mount the time clock at eye level.
Read the instructions fully so you get the best from our product.

Don’t

Do not install near to a direct heat source as this will affect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.

4

1 2

3 4

5

Series

Pairing the neoHub

To pair the neoHub with the neoApp, follow these steps.

• Connect the neoHub to your router with the Ethernet cable provided.

• Connect the power supply to the neoHub.

• The router will automatically assign an IP address to the neoHub, the Link LED
will light up RED once the neoHub has connected to your network.

• Once connected to the Heatmiser cloud server, the Link LED will turn GREEN.

• Connect your smartphone or tablet device to the same WiFi network as your router.

• Download the FREE Heatmiser neoApp from the Apple App Store, Google Play Store
or Windows Phone App Store and register an account.

• Once you have registered your account, press Sign In, then press Add Location.

• Press the connect button on the neoHub to add the location to your account.

• When successfully connected, enter a title for the location (e.g. Home).

The next step is to join the neoStat-hw V2 to the neoHub, we recommend joining the
neoStat located nearest to the neoHub first.
To add a neoStat-hw V2, follow these steps;

• In the app, select ADD NEOSTAT, enter a preset or custom title, then press NEXT.

• You now have two minutes to join the neoStat-hw V2 to the neoHub.

• On the neoStat-hw V2, use the Left / Right keys to select , press and hold Tick ...

• SETUP will be highlighted, now press the tick key once .....................................................

• Feature 01 is displayed on screen.

Pairing the neoStat-hw V2

6

What is a Mesh Network

Approach Sensor

NeoStats work using a mesh network, meaning neoStats have the ability to send &
receive signals via other thermostats on the network. This signal is relayed from one
thermostat to another until it reaches its destination. This communication method
extends the communication range whilst offering increased network stability when
compared with standard RF thermostats.
The Mesh symbol is shown when the device is communicating with the neoHub, if the
mesh symbol disappears this indicates connection to the neoHub has been lost.

The neoStat-hw V2 uses proximity to detect when you are about to use the touch
keys. As you approach the neoStat-hw V2, the touch keys and backlight will light up.
This can be useful if you need to adjust the timer in a dark room.

• Press the Tick key once again to pair the neoStat to the neoHub .................

• The MESH symbol appears flashing on the display.

• When the neoStat-hw V2 successfully connects to the neoHub the

MESH symbol will be permanently displayed.

• Press ADD ANOTHER for addtional zones or press FINISH to complete setup.

Please note, you only have to pair the hub to your account once.
To pair any additional neoStats, select ZONES, edit, then ADD ZONE.

7

Series

Mode 2 - Time Clock

7

8

9

10

5

1

2 3

4

6