Heat & Glo Mission Bay SERVICE PARTS and EXPLODED DRAWINGS
SERVICE PARTS and EXPLODED DRAWINGS
MISSION BAY GAS APPLIANCE
SPECS
MISSION BAY
Maximum
Input
BTU
Natural Gas 30,000 22,000 36 84 66.4
Propane 30,000 23,000 52 85 67.81
*Maximum Vent Blower On **Canada Only
Minimum
Input
BTU
Orifi ce
Size
(DMS)
Steady
State
Effi ciency*
%
P4**
%
TESTING STANDARDS
MODEL: Mission Bay
LABORATORY: OMNI Test Laboratories, Inc
STATE APPROVALS
STATE APPROVAL #
Massachusetts G3-1203-35
WARRANTY*
Unit Construction
Basic Warranty:
Items covered: Firebox, heat exchanger, log(s), and burner during period product is owned by original owner.
Conditions, Exclusions,
and Limitations:
Items NOT Covered: Components and parts made by other manufacturers, whether sold with the product or thereafter, unless authorized by Heat
Warranty VOID if: Product not installed, operated, and maintained in compliance with local building codes and as instructed by Installer’s Guide,
*The above is only an excerpt of the warranty policy and in no way represents nor intends to represent the entire warranty policy. Please refer
to the Heat & Glo Hearth & Home Technologies written warranty policy for a complete statement of the terms of the warranty.
1 year, labor 1 year
Warranty applies to original owner only, is nontransferable, and only to products installed in the U.S. or Canada. Limited to
replacement or repair of defective components or workmanship; maximum amount recoverable limited to purchase price of
appliance. If unable to repair or replace, full refund or purchase price instead.
& Glo in writing. Spillage caused by environmental conditions, inadequate venting, excessive offsets or negative air pressure
caused by mechanical systems.
Owner’s Manual, and Listing Agent identifi cation label furnished with product; any unauthorized service work; damage due to
shipping, improper handling, accident, abuse or misuse; fuels other than specifi ed in Installer’s Guide and Owner’s Manual;
unauthorized and unapproved modifi cations.
REPORT NO. 061-S-49-5
TYPE: Direct Vent Gas Heater
STANDARD: ANSI Z21.88b-2001ּ CSA 2.33b-M01ּ
UL307bּCAN/CBA 2.17-M91
20802 Kensington Blvd.
Lakeville, MN 55044
CONTENTS
Exploded View and Schematic ......................................................2-3
Service Parts List and Accessories ................................................4-6
Component Exploded Drawings and Schematic ............................7
Component Locations ....................................................................8
Installation Diagrams......................................................................9
Appliance SKU and Product History ............................................10
Part #7020-018D March 21, 2008
www.heatnglo.com
MISSION BAY FS
26
25
32
20
7
33
35
43
34
42
31
41
30
27
40
28
29
21
12
22
18
17
14
13
24
23
20
19
16
10
9
15
11
36
37
1
2
Figure 2.1 - Exploded View
39
38
4
3
5
6
8
7
Page 2
7020-018D
March 21, 2008
SCHEMATIC LIST
MISSION BAY FS
Item Description Mod? Item Description Mod?
1 Grille 23 Valve, Gas
2 Door Assembly Yes 24 Extension Knob S.I.T. ON/OFF
3 Glass Assembly (3 Piece) 25 Valve Cover
4 Pilot Assembly, NG 26 Dashboard Label
5 Log Set 27 Extension Knob S.I.T. HI/LO
6 Pedestal Door Yes 28 Switch, Rocker, ON/OFF
7 Top or Bottom Cast 29 Valve Bracket Yes
8 Pedestal Base 30 Igniter, Piezo
9 Pilot Bracket Yes 31 Adapter, DV (6-5/8 in.)
10 Hangar, Baffl e 32 Top Support
11 Bulkhead 33 Gasket, Elbow
12 Bulkhead Stop 34 Brick Assembly Yes
13 Blower Bracket 35 Burner Pan
14 Blower Housing Yes 36 Burner Support Kit (Left) Yes
15 Air Shutter Assembly Y es 37 Burner Assembly
16 Magnet Bracket 38 Burner Support Kit (Right) Yes
17 Curtain, Side (Left or Right) 39 Face Support
18 Curtain Mount (Left or Right) 40 Baffl e Assembly
19 Latch Assembly 41 Intake Tube
20 Damper Stop 42 Brick Shelf, Side (Left or Right) Yes
21 Adapter, DV (4 in.) 43 Brick Retainer
22 Flex Line, 3/8 Flare x 22L
*
*
If part has been modifi ed, please refer to the
*
Service Parts List for details.
March 21, 2008
7020-018D
Page 3
Loading...