Page 1
Log Set Assembly: LOGS-2128
Figure 2. Factory Installed Logs
FFigure 1. Log Assembly Location
PILOT
Figure 4. Placement of Log #1
FFigure 3. Placement of Log #1
1
1
A
1
2
3
A
D
B
C
NOTCH
HUMP
C
Models: ST-36TRB-IPI, PIER-36TRB-IPI
ST-36TVB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI
ST-36TRB-IFT, PIER-36TRB-IFT
CAUTION: DO NOT reposition logs that have been
factory installed! Follow these instructions to position
the logs that were packaged separately.
3
LOG PLACEMENT
INSTRUCTIONS
2
1
PILOT
B
C
D
igure 1. Log Assembly Location
STEP 1. CAUTION! Logs are fragile! Carefully remove the logs and cardboard tray from the inside of the fi replace.
See Figure 1. Remove the microfoam and inspect the logs for damage. Inspect the four factory installed logs for damage.
Locate the pilot in order to verify your position in relation to the appliance. See Figure 2.
NOTCH
1
Figure 2. Factory Installed Logs
1
C
HUMP
A
A
igure 3. Placement of Log #1
STEP 2. Log #1 (SRV2128-704): Mate the notch on the end of log # 1 with the hump on top of log A. Set the other
end of Log #1 onto the smooth area on top of Log C.
Heat & Glo • Log Placement Instructions • 2128-935 Rev. B • 2/17 1
Figure 4. Placement of Log #1
Page 2
Figure 6. Placement of Log #2
FFigure 5. Placement of Log #2
2
1
A
2
B
Figure 8. Placement of Log #3
FFigure 7. Placement of Log #3
3
1
A
2
B
3
D
C
C
D
2
INDENTATIONS
GRATE TINES
GRATE TINES
GRATE TINES
PILOT
1
C
1
A
A
PILOT
2
igure 5. Placement of Log #2
STEP 3. Log #2 (SRV2128-705): The Y-shaped end of log #2 should rest on log B and log C. The other end should
come in contact with the second grate tine from the left. Mate the bottom of log # 2 with the notches on top of log B and the
smooth area on top of the end of log C.
3
INDENTATIONS
Figure 6. Placement of Log #2
GRATE TINES
B
D
3
D
B
2
2
C
2
igure 7. Placement of Log #3
STEP 4. Log #3 (SRV2128-707): The bottom end of log #3 should come in contact with the far left grate tine. Mate
the bottom of log # 3 with the indentations on Log D and the top of Log #2.
Figure 8. Placement of Log #3
Heat & Glo • Log Placement Instructions • 2128-935 Rev. B • 2/172
Loading...