Healthrider HRTL34306.1 User Manual
Model No. HRTL34306.1
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-922-4222
Mon.–Fri., 6 a.m.–6 p.m. MST
USER'S MANUAL
ON THE WEB:
www.healthriderservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CONDITIONING GUIDELINES
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
HealthRider is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
ollowing important precautions and information before operating the treadmill.
f
1. It is the responsibility of the owner to ensure
hat all users of this treadmill are adequately
t
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
of this manual and order part number 146148,
r see your local electronics store.
o
12. Failure to use a properly functioning surge
suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.
13. Keep the power cord and the surge suppressor away from heated surfaces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See MAINTENANCE AND TROUBLESHOOTING on page
18 if the treadmill is not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 12).
7. The treadmill should not be used by persons
weighing more than 250 pounds.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
Always wear athletic
shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.
When connecting the power cord (see page 11),
10.
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
11. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 11. To purchase a surge suppressor, see
your local HEALTHRIDER dealer or call the
toll-free telephone number on the front cover
16. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
17. The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The pulse sensor is intended only as an exercise aid in determining heart rate trends in
general.
18. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
19. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in use.
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW TO FOLD
AND MOVE THE TREADMILL on page 16.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.
3
1. When folding or moving the treadmill, make
2
sure that the storage latch is fully closed.
22. Do not change the incline of the treadmill by
lacing objects under the treadmill.
p
23. Inspect and properly tighten all parts of the
treadmill regularly.
he treadmill, and before performing the main-
t
tenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
epresentative only.
r
24. Never drop or insert any object into any
opening on the treadmill.
25. DANGER: Always unplug the power
cord immediately after use, before cleaning
26. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown here has been placed on the treadmill.
If a decal is missing, or if it is not legible, call the toll-free
telephone number on the front cover of this manual and
order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown at actual
size.
4
BEFORE YOU BEGIN
Thank you for selecting the HEALTHRIDER®H110i
treadmill. The H110i treadmill combines advanced
technology with innovative design to let you enjoy an
excellent form of cardiovascular exercise in the conve-
ience and privacy of your home. And when you’re not
n
exercising, the unique H110i treadmill can be folded
up, requiring less than half the floor space of other
treadmills.
For your benefit, read this manual carefully before
you use the treadmill. If you have questions after
Accessory Tray
Handrail
Storage Latch
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number is found on the front cover of this man-
al. The serial number is found on a decal attached to
u
the treadmill (see the front cover of this manual for the
location of the decal).
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Console
Key/Clip
Walking Belt
Foot Rail
Rear Roller
Adjustment Bolts
Hood
Reset/Off
Circuit Breaker
Power Cord
Wheel
5
ASSEMBLY
Crossbar Screw
(85)–2
Upright Washer
(14)–2
Upright Bolt (2)–4
Silver Ground
Screw (84)–1
Upright Nut(75)–4
Handrail Bolt (8)–4
Upright Star
Washer (9)–6
Handrail Star
Washer (5)–4
Colored Patch Frame Bolt (1)–2
Console Screw/
Latch Screw (10)–6
Crossbar Star
Washer (7)–2
Base Pad
Screw (26)–6
Wheel Housing
Washer (32)–4
Wheel Housing
Nut (43)–4
Wheel Housing Bolt (13)–4
ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials; do not
A
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys , assembly requires a phillips screwdriver , an
adjustable wrench , and needlenose pliers .
Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag,
check to see if it has been preattached to one of the parts to be assembled.
cluded. To avoid damaging plastic parts, do not use power tools for assembly.
Extra hardware may be in-
1. Make sure that the power cord is unplugged.
Have a second person hold the Base (52) in the
position shown.
Attach six Base Pads (63) to the Base (52) with
six Base Pad Screws (26).
1
26
63
52
63
6
26
63
26
26
63
26
63
2. Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright [54]
as a large hole near the lower end).
h
Hold the Left Upright (53) so the two small
holes are on top as shown. Insert two Upright
Bolts (2) into the bracket on the Left Upright.
Attach the Left Upright to the Base (52) with the
Upright Bolts, two Upright Star Washers (9) and
two Upright Nuts (75).
Upright Nuts yet.
Attach the Right Upright (54) to the Base (52) in
the same way.
Do not tighten the
2
54
Large
Hole
Small Holes
9
2
75
9
52
53
2
9
75
9
3. Slide the two Wheel Housings (45) onto the Base
(52). Attach each Wheel Housing with two Wheel
Housing Bolts (13), two Wheel Housing Washers
(32), and two Wheel Housing Nuts (43).
4. Position the Base (52) as close to the front of the
treadmill as possible, as shown.
See drawing 4a. Insert the wire tie and the connector on the end of the Wire Harness (39) into
the square hole in the Right Upright (54). Then,
insert the Wire Harness until the wire tie is extending from the upper end of the Right Upright.
Secure the Wire Harness to the top of the Right
Upright so that it will not fall inside.
3
45
13
4
52
39
54
32
32
43
52
13
4a
45
39
32
43
32
54
Wire Tie
See drawing 4b. Attach the ground wire on the
Wire Harness (39) to the indicated hole in the
Base (52) with a Silver Ground Screw (84).
Then, press the indicated Grommet (49) into the
Right Upright (54).
4b
54
49
39
Ground
Wire
84
52
7
5. See the left inset drawing. Identify the two Frame
Spacers (11). Open the included packet of
rease, and apply grease to both sides of both
g
Frame Spacers. Then, identify the outer side of
ach Frame Spacer.
e
Hold a Frame Spacer (11) between the Right
Upright (54) and the Lift Frame (104), with the
outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the
Lift Frame with a Colored Patch Frame Bolt (1),
an Upright Washer (14), and an Upright Star
Washer (9);
Frame Bolt yet.
do not tighten the Colored Patch
5
54
9
11
14
104
11
1
6. See the left inset drawing. Identify the outer side
of the remaining Frame Spacer (11).
Hold the Frame Spacer (11) between the Left
Upright (53) and the Lift Frame (104), with the
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the Lift
Frame with a Colored Patch Frame Bolt (1), an
Upright Washer (14), and an Upright Star
Washer (9);
Frame Bolt yet.
do not tighten the Colored Patch
Inner
Side
11
Outer
Side
6
53
9
14
1
104
11
54
9
14
1
104
11
Inner
Side
1
Outer
Side
14
53
11
9
104
8
. Set the Console Assembly (91) face-down on a
7
soft surface to avoid scratching the Console
Assembly. Hold the Right Handrail (33), which
has a large hole in the location shown, near the
onsole.
C
Next, insert the console wire into the hole in the
side of the Right Handrail (33). Using
needlenose pliers, pull the console wire out of
the hole near the bracket on the Right Handrail.
7
33
racket
B
Console
ire
W
Large
Hole
85
7
10
Then, set the Right Handrail (33) on the Console
Assembly (91).
pinched. Finger tighten a Crossbar Screw (85)
with a Crossbar Star Washer (7) into the Right
Handrail, and then start two Console Screws
(10) into the Right Handrail.
Crossbar Screw and then the two Console
Screws; do not overtighten the Screws.
Attach the Left Handrail (not shown) to the
Console Assembly (91) in the same way. Note:
There are no wires on the left side.
8. See drawing 8a. Press the indicated tab and re-
move the guard from the console wire with
needlenose pliers. Discard the guard.
With the help of a second person, hold the Console
Assembly (91) near the Right Upright (54).
Remove the colored tie from the Wire Harness
(39). Connect the Wire Harness to the console
wire. Make sure to connect the connectors
properly (see drawing 8b). The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON. Insert the connectors and excess
wire into the Right Upright (54).
Make sure that no wires are
Tighten the
91
8
91
Console
Wire
39
54
8a
Console
Wire
Tab
Guard
8b
39
9. Attach the Console Assembly (91) to the Right
Upright (54) and the Left Upright (53) with four
four Handrail Bolts (8) and four Handrail Star
Washers (5).
pinched. Start all four Handrail Bolts before
tightening them.
With the help of a second person, carefully lower
the Uprights (53, 54) to the floor.
Make sure that no wires are
9
54
91
8
5
8
5
53
9
Loading...