Thank you for your purchase of this Health o meter® Professional product. Please read this
manual carefully, and keep it for easy reference or training.
TABLE OF CONTENTS
Caution and Warning................................................................................................. 3
Specifications for This Scale ..................................................................................... 4
Note: This scale has been factory calibrated, and does not
require calibration prior to use.
Please register your scale for warranty coverage at:
www.homscales.com
For User Instructions updates and revisions please go to:
www.homscales.com
2
CAUTION AND WARNING
• To prevent injury and damage to your scale, please follow these instructions very
carefully.
• Assemble and operate the scale per the enclosed user instructions.
• For accurate weighing, this scale must be placed on a flat, stable surface.
• For accurate weighing, verify before each use the proper operation
according to the procedure described in this manual.
• Operating this scale at voltages and frequencies other than specified can
damage the equipment and will void the warranty.
• Do not transport the scale with any weight on the platform.
• Do not exceed recommended weight limit of 400 lb / 180 kg for this scale.
• Do not use in the presence of flammable or explosive materials.
• For accurate weighing, if the “Lo” indicator activates, replace the batteries
or switch to the AC adapter as soon as possible.
• If the scale becomes damaged, it should not be operated until properly serviced. All
repairs should be performed by authorized service personnel.
• When replacing / inserting the batteries, be sure to use new AA batteries.
• To prevent patient injury, the patient must be attended to throughout the
entire weighing event.
When operating this scale with the optional AC adapter:
• Operate this scale exclusively with the AC adapter provided by Health o
meter® Professional. Use of an unspecified adapter will void the warranty,
and can pose a serious safety hazard.
• For use with AC adapter model ADPT40.
• Prior to using this scale, inspect the AC adapter cord for cracking or
fraying, or for broken / bent plug prongs.
• Prior to using this scale, ensure that the AC adapter is plugged into an
outlet with the rated voltage appropriate for operation.
• Ensure that the AC adapter outlet is wired to a circuit breaker or other
protected power source.
• Ensure that the AC adapter and scale do not come in contact with liquids,
excessive temperature, or excessive humidity.
• Unplug the AC adapter, and carefully store both the AC adapter and
adapter cord before moving the scale.
• If the scale is being connected to another medical device, the power
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power. This ensures proper electrical isolation.
3
SPECIFICATIONS FOR THIS SCALE
General
The Model 349KLX remote display digital scale uses highly sophisticated microprocessor
technology. Each scale is designed to provide accurate, reliable and repeatable weight
measurements. In addition, each scale is designed to provide the user with features that make
the weighing process simple, fast, and convenient.
This scale is set up to use weighing technology that is able to determine the actual weight of a
moving patient.
Weight can be displayed in pounds (lb) or in kilograms (kg). For privacy and convenience, the
scale features a remote display head which may be held by the operator, placed on a table or
other flat surface, or mounted on a wall. This scale can be powered using an AC adapter,
model ADPT40 (not included), or by 6 AA batteries (included).
349KLX Scale Specifications
Capacity and Resolution
Power Requirements
Environmental
Physical Dimensions
400 lb x 0.2 lb (180 kg x 0.1 kg)
120 VAC, 60Hz - DC adapter (model ADPT40) or 6 AA batteries.
Operating temperatures: 50°F to 95°F (10°C to 35°C)
Storage temperatures: 32°F to 125°F (0°C to 50°C)
Maximum Humidity: 95% RH
Platform
Length: 12” (30.5 cm)
Width: 12.5” (30.5 cm)
Height: 1.875” (4.8 cm)
Weight: 8.8 lb (4.0 kg)
Display assembly
Length: 7.75” (19.7 cm)
Width: 1.5” (3.8 cm)
Height: 4.25” (10.8 cm)
Weight: 12.8 oz (0.36 kg)
4
CERTIFICATIONS / DISPOSAL
Certification Descriptions
Pelstar, LLC has been officially certified as the manufacturer
of Health o meter® Professional medical devices. The Pelstar,
LLC quality assurance system covers the development,
production, sales and service of medical scales and
measuring systems.
349KLX Scale Disposal
This Health o meter® Professional scale must be disposed of properly as electronic waste.
Follow the national, regional or local regulations which apply to you for disposal of electronic
waste or battery. Do not dispose of this device in the domestic waste stream.
5
ASSEMBLY INSTRUCTIONS
Before Assembly
Each 349KLX remote display digital scale is shipped disassembled in one carton. Carefully
inspect the carton for shipping damage before unpacking. If damage is found, contact your
shipper or a Health o meter® Professional representative immediately at 1-800-815-6615.
Claims must be filed with the shipper as soon as possible after receipt of the package. The
following information details what you will find inside the main carton as you unpack the parts for
assembly.
To prevent scratching any components, carefully remove each assembly from the carton and
unwrap the packing materials. Set the carton aside for storage. To avoid damaging the scale
parts when unpacking, do not use a box cutter, knife, scissors, or any sharp object to open the
protective inner packaging.
Parts List
Carton
(1) Scale platform
(1) Display assembly
(6) AA batteries
(1) User instructions
(1) Metal Stand
(2) #8 Anchoring screws (4.2 mm nominal OD)
(2) Drywall mounting anchors
Tools Required
Phillips head screwdriver (not included)
6
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.