Hatco CWB-2, CWB-3, CWB-4, CWB-5, CWB-6 General Manual

COMPONENT

REFRIGERATED DROP-IN WELL

Models CWB-1, -2, -3, -4, -5, -6

Hatco Refrigerated Drop-In Well keeps
prechilled food products at safe serving
temperatures. Unique top angled inside wall
design allows cold air to effectively blanket
your food product to keep the food optimally
cold and fresh.

FLEXIBILITY

Hatco Refrigerated Drop-In Well

This
mount unit that holds full-size pans, available
in one through six pan configurations.
electronic

control assembly can be
conveniently mounted to either side of the
condensing unit or remotely mounted up to
four feet (1219 mm) from the unit (cannot be
mounted over condensing coil).

For easy and flexible installation, the condenser
unit for this

drop-in cold food pan
rotated 90˚ or 180˚ on all models. In addition ,
the condenser unit is movable in the four-, five-,
and six-pan models.

QUALITY

The following features assure the finest
performance for years to come:

• NSF 7 approved cold wall construction

utilizes R404A refrigerant keeping food
product cold without drying it out!

• Adjustable condenser unit can rotate 90˚

or 180˚ on all models for easy venting
adjustments and flexibility at installation.

• Mobile condenser unit can be moved in

"

(165 mm) increments from end to

6.5
center on the four-, five- and six-pan units
(see drawing on back).

• Auto-defrost is activated through an

advanced electronic controller programmed
at customer location.

• Optimal insulation on sides and bottom to

ensure better cold retention. Environmentally­friendly insulation used throughout.

• Easy serviceability with a sight glass, service

valves, dryer/filter, and a receiver. Long,
flexible refrigerant line (ability to pullout
condensing unit) for service.

• Built with one of the most efficient

condensing units on the market today.

• Matches the Hatco line of Heated Wells for

a fully integrated look.

• 1.25

" (32 mm)

drain simplifies cleaning.

is a top

The

maybe be

ITEM#

Model CWB-6 with accessory food pans
and additional support bars

Unique angled inside
wall design provides
easy access and clear
views, while allowing
cold air to effectively
blanket your food
product

Allows for an easy, elegant, and
customizable food product presentation
for your buffets, salad bars, cold food
displays or anywhere else a refrigerated
well is required

Drop-in Refrigerated Well Countertop Cutout Dimensions

Model Minimum Width Maximum Width Minimum Depth Maximum Depth Below Counter

CWB-1 17.13" (435 mm) 18.5" (470 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)
CWB-2 30.13" (765 mm) 31.5" (800 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)
CWB-3 43.13" (1095 mm) 44.5" (1130 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)
CWB-4 56.13" (1426 mm) 57.5" (1461 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)
CWB-5 69.13" (1756 mm) 70.5" (1791 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)
CWB-6 82.13" (2086 mm) 83.5" (2121 mm) 25.19" (640 mm) 26.5" (673 mm) 25.5" (648 mm)

PARTS AND ON-SITE LABOR GUARANTEED FOR
ONE YEAR. AN OPTIONAL FIVE-YEAR EXTENDED
WARRANTY ON THE COMPRESSOR IS AVAILABLE
UPON REQUEST.

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. CWB Spec Sheet

Printed in U.S.A.

November 2009

REFRIGERATED DROP-IN WELL

32" (813 mm)

FRONT VIEW

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

Condenser
can be
rotated
90º or 180º

1¼" diameter
drain directly
plumbed (trap
recommended).

45" (1143 mm)

FRONT VIEW

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

Condenser
can be
rotated
90º or 180º

1¼"

diameter
drain directly
plumbed (trap
recommended).

58" (1473 mm)

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

FRONT VIEW

Condenser can be rotated 90º or
180º and mounted as shown or
moved every 6.5"(165 mm) until it is
centered under the refrigerated well.

1¼" diameter drain directly
plumbed (trap recommended).

71" (1803 mm)

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

FRONT VIEW

Condenser can be rotated 90º
or 180º and mounted as shown
or moved every 6.5"(165 mm) until
it is centered under the refrigerated well.

1¼" diameter drain
directly plumbed (trap
recommended).

84" (2134 mm)

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

FRONT VIEW

Condenser can be rotated 90º or
180º and mounted as shown or moved
every 6.5"(165 mm) until it is centered
under the refrigerated well.

1¼" diameter drain directly
plumbed (trap recommended).

FRONT VIEW

SIDE VIEW

11.71"

(297 mm)

27" (686 mm)

25.5"

(648 mm)

19"

(483 mm)

Condenser
can be
rotated
90º or 180º

1¼" diameter
drain directly
plumbed (trap
recommended).

Models CWB-1, -2, -3, -4, -5, -6

ITEM#

Model CWB-1

Model CWB-2

Model CWB-3

SPECIFICATIONS

Full-Size Insulated Rectangular Model – StandardWatt

Model* HP Volts Watts Amps Shipping Weight

CWB-1 1/4 120 804 6.7 165 lbs. (75 kg)
CWB-2 1/4 120 804 6.7 175 lbs. (79 kg)

CWB-3 1/4 120 804 6.7 185 lbs. (84 kg)
CWB-4 1/3 120 1044 8.7 225 lbs. (102 kg)

CWB-5 1/2 120 1380 11.5 275 lbs. (125 kg)
CWB-6 1/2 120 1380 11.5 285 lbs. (129 kg)

* Model number indicates number of full-size food pans unit will accommodate.

All units: R404A Refrigerant.

Model CWB-4

Model CWB-5

Model CWB-6

DIMENSIONS

CWB-1: 19"W x 27"D x 25.5"H (483 x 686 x 648 mm).
CWB-2: 32"W x 27"D x 25.5"H (813 x 686 x 648 mm).
CWB-3: 45"W x 27"D x 25.5"H (1143 x 686 x 648 mm).
CWB-4: 58"W x 27"D x 25.5"H (1473 x 686 x 648 mm).
CWB-5: 71"W x 27"D x 25.5"H (1803 x 686 x 648 mm).
CWB-6: 84"W x 27"D x 25.5"H (2134 x 686 x 648 mm).

Condenser Unit:
CWB-1, -2, -3, -4, -5, -6:
CWB-4, -5, -6:

May be mounted at the center line or in increments of 6.5

(165 mm) between the center line and shown location above.

Electronic Control

May be field mounted to either side of the condensing unit or remote
mounted up to 4’ (1219 mm) from unit. May not be mounted over the
condensing coil.

The condenser unit maybe rotated 90˚ or 180˚ .

:

"

VOLTAGE

120, single phase (uses NEMA 5-15P).

OPTIONS (NOT FOR RETROFIT)

❑ Extended 5-Year Warranty on the Compressor

ACCESSORIES

❑ 12" (305 mm) and 20" (508 mm) Pan Support Bars
❑ Full-Size Stainless Steel Food Pans, 2 .5" (64 mm) deep

❑ Full-Size Stainless Steel Food Pans, 4" (102 mm) deep
❑ Full-Size Stainless Steel Food Pans, 6" (152 mm) deep
❑ Half-Size Stainless Steel Food Pans, 2.5" (64 mm) deep
❑ Third-Size Stainless Steel Food Pans, 2 .5"" (64 mm) deep

PRODUCT SPECS

Cold Well

The NSF 7 approved Refrigerated Drop-in Well shall be a Model….as
manufactured by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.

With 24/7 parts and service assistance (U.S. and Canada only), the
Refrigerated Drop-in Well shall be rated at ….watts, ….volts, ….hp, and
be ….inches (millimeters) in overall width and be ….inches (millimeters)
in overall depth. It shall utilize R-404A refrigerant and consist of

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. CWB Spec Sheet November 2009

aluminized steel housing with a stainless bezel, an electronic
temperature control, pan support bars for full-size pans, condenser unit
(can be rotated), compressor, flexible refrigerant lines, sight glass, service
valves, receiver, and dryer/filter.

Accessories may include pan support bars and stainless steel food pans.

Printed in U.S.A.