Page 1
USER MANUAL
Item nos. 3053310, 3053312, 3053314, 3053316
Battery Adapter & Battery Adapter Plates
The infor mation in thi s document i s furnishe d for infor mational us e only, is subjec t to change wi thout noti ce, and should n ot be constr ued as a commi tment by Vic tor Hasselb lad AB. The tex t and images i n this docume nt cannot be re printed or re used witho ut the expre ss permiss ion of Victor H asselblad AB . Victor Hass elblad AB assu mes no
respons ibility or l iability f or any error s or inaccura cies that may a ppear in this d ocument. V ictor Has selblad AB as sumes no res ponsibili ty or liabili ty for los s or damage inc urred duri ng or as a resul t of using Hass elblad prod ucts. Cop yright © 2013 - Vic tor Hassel blad AB. All rig hts reser ved.
1/3 Document ID: Battery Adapter and Plates _3053310_12_14_16_User Manual D_V1_2013
www.hasselblad.com
Battery Adapter
The Battery Adapter (3053310) allows a standard 7.2
V “Sony™ NP-F / L-type” battery (not supplied) to be
directly mounted onto an H5D, H5D-MS or H4D-60
sensor unit to provide stand-alone operation when
FireWire operation is not possible. This is especially
useful when using the H5D sensor unit attached to a
technical camera on l ocation, for example.
There are three different Battery adapter plates
(supplied as separate items) that support the
mounting of the adapter to the three sensor units
respectively; 3053312 for H5D, 3053314 for H5D-50
MS and 3053316 for H4D-60. Please ensure you
have the correct version.
In each case, the Battery adapter plate is attached
to the sensor unit first followed by the Battery
Adapter. A small cross-headed screwdriver (size:
PH1) is needed for both operations.
The Battery adapter plate can remain attached
to the sensor unit when the Battery Adapter is not
required. It o nly takes a few moments to remove or
attach the Battery Adapter to the Battery adapter
plate when required.
Fitting
1. Invert the sensor unit as in the illustration.
Remove the protective rubber cover that
shields the connector port. Keep it safe
for later use.
2. Remove the two screws (H5D) / four
screws (H4D) from the lower plate on the
sensor unit.
Choose the correct FixPlate that suits the
sensor unit model:
30 53312 for H5D
3053314 for H5D-50 MS
3053316 for H4D-60
H4D has
four screws
H5D has
two screws
Page 2
USER MANUAL
(Item nos. 3053310, 3053312, 3053314, 3053316)
Battery Adapter & Battery Adapter Plates
The infor mation in th is documen t is furnis hed for inf ormation al use only, is su bject to ch ange with out notice, a nd should not b e constr ued as a commi tment by Vic tor Hasse lblad AB & Hass elblad A/S . The tex t and i mages in this docum ent can not be reprin ted or reuse d with out th e expr ess pe rmiss ion of V ictor Hasse lblad A B & Hass elblad A/S. V ictor Hasse lblad AB & Hass elblad
A/S assume n o responsi bility or li ability fo r any errors o r inaccurac ies that may ap pear in this d ocument. Vi ctor Hass elblad AB & Has selblad A/S a ssume no res ponsibili ty or liabili ty for loss o r damage incu rred duri ng or as a result o f using Hass elblad produ cts. Cop yright © 2013 - Vic tor Hassel blad AB & Hasse lblad A/S. All r ights res erved.
2/3 Document ID: Battery Adapter and Plates _3053310_12_14_16_User Manual D_V1_2013
www.hasselblad.com
3. Ensure the correct orientation of the
Battery adapter plate (the item number
should be facing up as in the illustration)
when placing into position.
4. H5D versions (3053312, 3053314) require
two screws and H4D versions (3053316)
require four screws for attachment to
the sensor unit.
5. The Battery Adapter includes three captive screws. Check for the correct orientation of the Battery Adapter (as in the
illustration) and lower it down onto the
Battery adapter plate, ensuring the plug
A fits firmly into the connector port B.
Screw the Battery Adapter onto the Battery adapter plate using the three captive screws. To avoid damage to the components, do not overtighten the screws.
If you intend to use flash / strobe light-
ing, camera and flash sync leads can be
connected now also.
OUT
IN
A
B
Page 3
USER MANUAL
(Item nos. 3053310, 3053312, 3053314, 3053316)
Battery Adapter & Battery Adapter Plates
The infor mation in th is documen t is furnis hed for inf ormation al use only, is su bject to ch ange with out notice, a nd should not b e constr ued as a commi tment by Vic tor Hasse lblad AB & Hass elblad A/S . The tex t and i mages in this docum ent can not be reprin ted or reuse d with out th e expr ess pe rmiss ion of V ictor Hasse lblad A B & Hass elblad A/S. V ictor Hasse lblad AB & Hass elblad
A/S assume n o responsi bility or li ability fo r any errors o r inaccurac ies that may ap pear in this d ocument. Vi ctor Hass elblad AB & Has selblad A/S a ssume no res ponsibili ty or liabili ty for loss o r damage incu rred duri ng or as a result o f using Hass elblad produ cts. Cop yright © 2013 - Vic tor Hassel blad AB & Hasse lblad A/S. All r ights res erved.
3/3 Document ID: Battery Adapter and Plates _3053310_12_14_16_User Manual D_V1_2013
www.hasselblad.com
6. Place a fully loaded battery (7.2 V “Sony™
NP-F / L-type”) down onto the Battery
Adapter, as in the illustration, and then
slide it along until it stops and the locking button clicks into place.
To remove the battery, hold the locking
button in while sliding the battery out.
7. The sensor unit can now be activated by
the On / Off switch on the adapter.
Battery Adapter Plates
Battery Adapter Plates (3053312, 3053314,
3053316) provide the necessary support for
the mounting of a Battery Adapter (3053310)
onto the sensor units of H5D, H5D-MS and
H4D-60 camera models. Mounting screws are
supplied. A small cross-headed screwdriver
(size: PH1) is needed (not supplied) to complete
the operation. Please ensure you select the
correct plate to suit your camera model.
Fitting
Please see the Battery Adapter (3053310)
user manual for detailed fitting instructions.
Ce texte dans votre langue?
Utilisez “Google Translate” sur Internet.
Diesen Text in Ihrer Sprache?
Verwenden Sie “Google Translate” im Internet.
Este texto en su idioma?
El uso de “Google Translate” en Internet.
Questo testo nella tua lingua?
Utilizzare ‘Google Translate’ su Internet.
Este texto na sua língua?
Usar “Google Translate” na Internet.
Denna text på ditt språk?
Använd “Google Translate”på Internet.
FRA
DEU
ESP
ITA
PRT
SWE
Ce texte dans votre langue?
Utilisez “Google Translate” sur Internet.
Diesen Text in Ihrer Sprache?
Verwenden Sie “Google Translate” im Internet.
Este texto en su idioma?
El uso de “Google Translate” en Internet.
Questo testo nella tua lingua?
Utilizzare ‘Google Translate’ su Internet.
Este texto na sua língua?
Usar “Google Translate” na Internet.
Denna text på ditt språk?
Använd “Google Translate”på Internet.
Deze tekst in uw taal?
Gebruik ‘Google Translate’ op het internet.
FRA
DEU
ESP
ITA
PRT
SWE
NLD
JPN
CHN
IND
RUS
SAU
Plate no. H5D H5D-MS H4D-60
3053312 X
3053314 X
3053316 X
Loading...