Harman-Kardon Citation 200 Quick Start Guide
CITATION 200
APP
1
Google Assistant setup
Ok
Google
All product features will be set up.
Google Home
Download the Google Home app to set up Google Assistant
to use your voice to control your Citation 200.
AirPlay setup
Settings Wi-Fi
Wi-Fi
XXX
SET UP NEW AIRPLAY SPEAKER…
(iOS)
Citation 200
For AirPlay only users, skip the Google Home app; on your iOS device, go to Settings > Wi-Fi and select “Citation 200”
under SET UP NEW AIRPLAY SPEAKER ... Follow the onscreen instructions to complete setup.
Google Assistant and Chromecast built-in™ will require additional set up with the Google Home app.
PRODUCT TOUR
2
X1
Regional power cord
(varies depending on country)
Citation 200
X1
Charging cradle X1
Back
mute/unmute
FrontTop
Microphones
Power on/off
Play/Pause;
stop timers,
alarms and
responses
Push to talk
to Google
Assistant
<2s
>2s
Reset:
>10s
Bluetooth
Volume
Lights
when
active
Wi-Fi status
indicator
Microphone
CHARGING
3
Low battery
Charging in progress
Press to check battery level
GET STARTED
4
GoogleHome
Google Home
(Android/iOS)
Add Citation 200 to your home Wi-Fi network:
Download and run the Google Home app on a phone or tablet.
Follow the instructions on the touch screen and Google Home app to finish the setup.
* Enable Bluetooth (iPhone / iPad).
Wi-Fi status indicator
Excellent
Recommended
Weak or disconnected
Chromecast built-in™
5
Step 1: Open Chromecast-enabled app.
Step 2: Play Music.
Step 3: Tap the cast icon and select “Citation 200”.
e.g.
Spotify
Pandora
TuneIn
Deezer
Google Play Music
* Device can support multi-room control provided
by Chromecast built-in, more details you can refer
to Google Home app.
AirPlay
6
Step 1: On an iOS device, enter the Control Center.
Step 2: Tap
to select “Citation 200” as speaker.
Step 3: Start audio streaming from an app.
Music
iPhone
Citation 200
GOOGLE ASSISTANT
7
Microphone muted:
Mute the microphone to
stop Google Assistant
from listening.
Mute Unmute
Talk to Google for hands-free help.
Just start by saying
“Ok Google”
OWNER’S MANUAL
8
Download the full owner’s manual from harmankardon.com
DA: Hent den fulde brugervejledning på harmankardon.com
DE: Laden Sie die vollständige Bedienungsanleitung von harmankardon.com herunter
ES: Descárgate el Manual de usuario completo en: harmankardon.com
FR: Téléchargez le mode d’emploi complet sur harmankardon.com
IT: Scarica il manuale dell’utente integrale da harmankardon.com
NL: Download de complete gebruikershandleiding van harmankardon.com
NO: Last ned hele brukerhåndboken fra harmankardon.com
SV: Ladda ner hela bruksanvisningen från harmankardon.com
RU: Загрузите полное руководство пользователя с сайта harmankardon.com
ID: Unduh Buku Petunjuk Pemilik yang lengkap dari harmankardon.com/wireless
JP: 『Owner’s Manual』（取扱説明書）（全文）をharmankardon.com から ダウン ロ ードしてくだ さい
KO: harmankardon.com 에서 사용자 매뉴얼 전체를 다운로드하십시오
9
SPECIFICATIONS
• Model Name: CITATION 200
• Power supply: 100 - 240 V ~ 50 / 60Hz
• Output power: 50 W RMS
• Bluetooth version: 4.2
• Bluetooth transmitter frequency range: 2402 – 2480 MHz
• Bluetooth transmitter power: <10 dBm (EIRP)
• Bluetooth transmitter modulation: GFSK,π/4 DQPSK, 8DPSK
• Wireless network: 802.11a/b/g/n/ac (2.4GHz/5GHz)
• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4GHz ISM Band, USA and Canada 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi transmitter power: <20 dBm (EIRP)
• 2.4G Wi-Fi modulation: DBPSK, DQPSK, CCK, QPSK,BPSK,16QAM, 64QAM
• 5G Wi-Fi transmitter power: < 23 dBm (EIRP)
• 5G Wi-Fi modulation: QPSK, BPSK, 16QAM, 64QAM, 256QAM
• 5G Wi-Fi transmitter frequency range: 5.15 - 5.35 GHz, 5.470 - 5.725 GHz, 5.725 - 5.825 GHz
1. Information on power consumption. This equipment complies with
European Commission Regulation (EC) No 1275/2008 and (EU) No
801/2013.
O
(all wireless connections are deactivated)
Networked standby 2.0 Watt
2. The period of time after which the power management function
switches the equipment automatically into:
O Short press power key
Networked
standby
3. If this equipment has wireless network connections:
How to activate wireless network connections:
• Set up the product according to instructions;
• Switch into wireless mode (Bluetooth or Wi-Fi);
• Connect with energy using product(s).
How to deactivate wireless network connections;
If the device is connected
with Bluetooth or Wi-Fi
0.5 Watt
the device shall enter
2.0 Watt networked
Standby automatically
in 20 minutes.
• Short press power key to turn off the device.
This device complies with Part 15 of the FCC rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. CAN ICES-3 (B) /
NMB-3 (B).
IC Caution:
User should also be advised that:
(i) the device for operation in the band 5150 - 5250 MHz is only for
indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands
5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p.
limit: and
(iii) the maximum antenna gain permitted for devices in the band
5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for pointto-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated
as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and
5650 - 5850 MHz and that these radars could cause interference and/
or damage to LE-LAN devices.
Loading...