Harman kardon BDT20 Owner’s Manual

BDT 2/BDT 20

Blu-ray Disc™ player

Owner’s Manual

BDT 2/BDT 20

IMPORTANT SAFETY INSTRUCTIONS 3

UNPACKING 5

INSTALLATION LOCATION 5

CLEANING 5

THANK YOU FOR CHOOSING HARMAN KARDON® PRODUCTS! 5

BDT 2/BDT 20 FEATURES 6

SUPPLIED ACCESSORIES 6

FRONTPANEL CONTROLS 7

REARPANEL CONNECTIONS 8

Table of Contents

REMOTE CONTROL FUNCTIONS 8

CONNECTING THE PLAYER 10

PREPARING THE REMOTE CONTROL 10

SETTING UP THE PLAYER 11

PLAYING DISCS 14

PLAYING FILES FROM USB DEVICES AND CD DATA DISCS 16

USING PLAYLISTS 18

TROUBLESHOOTING 19

SPECIFICATIONS 20

2

BDT 2/BDT 20

Important Safety Instructions

Important Safety Instructions

Read these instructions.1.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions.4.
Do not use this apparatus near water.5.
Clean only with a dry cloth.6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.7.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.8.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. 9.

The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.10.
Only use attachments/accessories specified by the manufacturer.11.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus 12.

combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.13.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have 14.

fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.15.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.16.
The mains plug of the power supply cord shall remain readily operable.17.
Do not expose batteries to excessive heat such as sunshine, fire or the like.18.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO CONSTITUTEA
RISK OF ELECTRIC SHOCK TO PERSONS.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.

ENGLISH

SEE MARKING ON BACK OF PRODUCT.

FCC Regulations

FCC Information For Users

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference; and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and then on, the user
is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver.

•

Connect the equipment to a different outlet so that the equipment and receiver are

•

on different branch circuits.

•

Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by Harman could void the user’s
authority to operate the equipment.

IC Statement and Warning

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme à la norme NMB-003 du Canada.

3

BDT 2/BDT 20

Important Safety Instructions

For Canadian Model

This Class B digital apparatus complies with
Canadian ICES-003. For models having a power
cord with a polarized plug:

CAUTION: To prevent electric shock, match wide
blade of plug to wide slot, fully insert.

Pour le modèle canadien :

Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada. Sur
les modèles dont la fiche est polarisee:

ATTENTION: Pour éviter les chocs électriques,
introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser
jusqu’au fond.

Instructions for Users on Removal and Disposal of Used Batteries.
Specifications of Included Battery Types.

These symbols shown on the product or the packaging or in the manual or separate
information sheet mean that the product itself, as well as the batteries included or built
into the product, should never be thrown away with general household waste. Take them
to applicable collection points, where proper treatment, recycling and recovery takes
place, in accordance with national or local legislation, or European Directives 2002/96/EC
and 2006/66/EC.

Correct handling of the product and batteries to be disposed saves resources and prevents
possible negative effects on the environment or human health.

The batteries included with your equipment may be alkaline, carbon zinc/manganese
or lithium (button cells) type. All types should be disposed of according to the above
instructions.

To remove the batteries from your equipment or remote control, reverse the procedure
described for inserting batteries in the owner’s manual.

For products with a built-in battery that lasts for the lifetime of the product, removal
may not be possible for the user. In this case, recycling or recovery centers handle the
dismantling of the product and the removal of the battery. If, for any reason, it becomes
necessary to replace such a battery, this procedure must be performed by authorized
service centers.

CAUTION: This product uses a laser system. To prevent direct exposure to the laser beam,
do not open the cabinet enclosure or defeat any of the safety mechanisms provided
for your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this
product, please read the owner’s manual carefully and retain it for future use. Should
the unit require maintenance or repair, please contact your local Harman Kardon service
center. Refer servicing to qualified personnel only.

4

BDT 2/BDT 20

Unpacking

Unpacking

The carton and shipping materials used to protect your new player during shipment were
specially designed to cushion it from shock and vibration. We suggest that you save the
carton and packing materials for use in shipping if you move or if the unit ever needs
repair.

To minimize the size of the carton in storage, you may wish to flatten it. You can do it by
carefully slitting the tape seams on the carton’s bottom and collapsing it. You can store
cardboard inserts in the same manner. Packing materials that cannot be collapsed should
be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and
other sections of the shipping-protection materials are recyclable. Please respect the
environment and discard those materials at a local recycling center.

Remove the protective plastic film from the front-panel lens. Leaving the film in place
will affect the performance of your remote control.

Installation Location

To ensure proper operation and to avoid the potential for safety hazards, place the unit
on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and
any mounting hardware can support the weight of the product.

Provide proper space both above and below the unit for ventilation. If this product will
be installed in a cabinet or other enclosed area, make certain that there is sufficient air
movement within the area. Under some circumstances, a fan may be required.

Do not place the unit directly on a carpeted surface.

Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct
sunlight or heating equipment.

Avoid moist or humid locations.

Do not obstruct the ventilation slots on the top and sides of the unit or place objects
directly over or next to them.

Do not place the BDT 2/BDT 20 directly on top of a product that generates excessive heat.

Due to the heat generated by the player and other components in your system, there is
the remote possibility that the rubber padding on the bottom of the unit’s feet may leave
marks on certain wood or wood-veneer materials. Use caution when placing the unit
on soft woods or other materials that heat or heavy objects may damage. Some surface
finishes may be particularly sensitive to absorbing such marks, due to a variety of factors
beyond Harman Kardon control, including the nature of the finish, cleaning materials
used, normal heat and vibration caused by the use of the product, or other factors. Your
warranty will not cover this type of damage to furniture, so exercise caution in choosing
an installation location for the component and in performing normal maintenance
practices.

Your new Harman Kardon Blu-ray Disc™ player requires a broadband Internet connection
for BD-Live™ interactivity.

Thank You for Choosing Harman Kardon® Products!

For more than fifty years, Harman Kardon products have been at the cutting edge of
audio and home theater technology. The first audio receiver wore a Harman Kardon
badge, and the company has been producing innovative entertainment products ever
since. The BDT 2/BDT 20 Blu-ray Disc™ player is the latest component offered in that
proud tradition.

Incorporating the latest high-definition audio and video processing technologies, the
BDT 2/BDT 20 is an essential part of a modern home theater system. It plays your favorite
Blu-ray Disc movies with up to 1080/24p video resolution when available on the disc,
thanks to HDMI™ (High-Definition Multimedia Interface) v.1.3a with 30/36-bit Deep
Color connectivity.

Connect the BDT 2/BDT 20 to the Internet, and BD-Live™ interactivity (available with
compatible discs) delivers additional features, updates and news of live events. Even
older DVD-Video discs will deliver outstanding picture quality when they are upscaled to
1080p video resolution.

Yet with all of its sophistication, the BDT 2/BDT 20 is simple to operate. Its controls
are similar to those for DVD players, and its enhanced on-screen menu system guides
you every step of the way. Easy to use and delivering outstanding performance, the
BDT 2/BDT 20 is sure to provide enjoyment for many years to come.

If you have any questions about this product, its installation or its operation, please
contact your retailer or custom installer, or visit the Harman Kardon Web site at
www.harmankardon.com.

ENGLISH

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after
unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy
water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth.
NEVER use benzene, aerosol cleaners, paint thinner, alcohol or any other volatile cleaning
agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.

Please register your product on our Web site at www.harmankardon.com.

Note: You’ll need the product’s serial number. At the same time, you can choose to
be notified about our new products and/or special promotions.

NOTE: Your Blu-ray Disc player is designed and manufactured for compatibility
with Region Management Information that is encoded on most Blu-ray Disc
recordings and DVD recordings:

BDT 2

•

units are designed only for playback of discs with Blu-Ray Disc Region
Code A and DVD Region Code 1 information, or for discs that do not contain any
Region Code information.

BDT 20 • units are designed only for playback of discs with Blu-ray Disc Region
Code B and DVD Region Code 2 information, or for discs that do not contain
Region Code information.

If there is a Region Code on a disc other than the one your BDT player is designed
for, it will not play in your BDT player.

5

BDT 2/BDT 20

BDT 2/BDT 20 Features

BDT 2/BDT 20 Features

Connectivity

One HDMI ver. 1.3a with 30/36-bit Deep Color connection

•

One coaxial digital-audio output

•

One USB 2.0 port that plays video, audio and photo content from USB devices

•

Connects to your LAN (local area network) for BD-Live interactivity via the Internet

•

Ease of Use

On-screen menu system

•

Dot-matrix front-panel information display

•

Full-function remote control

•

Disc Player Features

Region coding: Blu-ray Disc Region A/DVD Region 1 ( •BDT 2 models);

•

Blu-ray Disc Region B/DVD Region 2 (

•

Plays five-inch (12cm) and 3-inch (8cm) discs

Video formats supported: BD-Video (single-layer or double-layer), DVD-Video,

•

DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio), CD-R/RW

•

Audio formats supported: Dolby® Digital, Dolby Digital Plus, Dolby TrueHD, DTS®
Digital, DTS-HD™ High Resolution Audio, DTS-HD Master Audio,™ PCM, WMA (DRM­free version only): WMA9, CBR @192kbps, VBR @ 355kbps, MP3: 32kbps – 320kbps
bitrates, including variable bitrate encoding

•

Supports JPEG still-image format

Supports BD-Live interactivity

•

Video upscaling to 720p and 1080p

•

Progressive-scan video output

•

JPEG resolution supported: five megapixels, 5MB file size

•

JPEG still-image rotation in 90-degree increments

•

Thumbnail JPEG still-image menu

•

Fast play rates: 2x, 4x, 8x, 16x, 32x

•

Slow play rates: 1/2x, 1/4x, 1/8x, 1/16x

•

Random play (CDs only)

•

Repeat play

•

Parental-control system with user-programmable password

•

Disc recognition for up to 10 discs

•

Aspect-ratio adjustment

•

BDT 20 models)

Supplied Accessories

If any of these items are missing, please contact Harman Kardon Customer Service via
www.harmankardon.com.

Power cord

(Note: The power cord included will vary
depending on where the unit is sold.)

HDMI cable

Remote control

Two AA batteries

6

BDT 2/BDT 20

Front-Panel Controls

Front-Panel Controls

Power

Indicator

Power

Button

Power Indicator: When the BDT 2/BDT 20 is plugged into AC power and its Main Power
switch is set to “On,” the LED turns amber to indicate that the player is in Standby mode.
When you turn the BDT 2/BDT 20 on (by the Power button or the remote control), the LED
turns white.

Power Button: This button toggles the BDT 2/BDT 20 between the On and Standby
modes.

Disc Drawer: Insert a compatible disc into the drawer. The BDT 2/BDT 20 will accept
5-inch (12cm) and 3-inch (8cm) discs.

Open/Close Button: Press this button to open and close the disc drawer. Before
pressing this button, make sure that no objects are blocking the disc drawer.

Play Button: Press this button to play a disc that has been loaded into the player’s disc
drawer. Pressing this button when viewing photos begins a slide show with all photos in
the current folder.

Pause Button: Press this button to pause a disc that is playing. Pressing the button
while a Blu-ray Disc program or DVD program is playing will freeze-frame on the current
video frame. Pressing the button while the disc is paused will resume play. Pressing this
button while viewing photos freezes the current photo on the screen.

Stop Button: Press this button to stop playback. (With some discs, pressing the Play
button will resume playback from the point where it stopped.) Press the Stop button
twice to stop playback fully.

Disc

Drawer

Open/Close

Button

Play

Button

Information

Display

Pause

Button

Information Display: Various messages appear on th is display in response to
commands and to provide information about the BDT player’s status as described
throughout this manual.

Previous/Step Button: Press this button once to skip to the beginning of the track
or chapter being played – or, when viewing photos, to the previous photo. Press the
button twice to skip to the beginning of the previous chapter or track. Press the button
repeatedly to skip back through the previous chapters or tracks. When video content is
playing, press the Pause button, after which each press of the Previous/Step button will
step the video back by one frame.

Next/Step Button: Press this button once to skip to the beginning of the next track or
chapter – or, when viewing photos, to the next photo. Press the button repeatedly to skip
ahead through the subsequent chapters or tracks. When video content is playing, press
the Pause button, after which each press of the Next/Step bu tton will step the video
forward by one frame.

USB Port: Gently insert a USB flash drive or an HDD disk drive with a USB Standard-A
cable to this port.

IMPORTANT: Do not connect a PC or other USB host/controller to this port, or
you may damage both the BDT 2/BDT 20 and your device.

Orient the device’s plug so it fits all the way into the BDT 2/BDT 20’s USB connector.
You may insert or remove the device at any time – there is no installation or ejection
procedure.

Stop

Button

Previous/

Step

Button

Next/Step

Button

USB
Port

ENGLISH

7