Harbor Freight Tools Pencil Torch Product manual
BUTANE
PENCIL
SPECIFICATIONS
Flame Temperature 2000° F
Fuel Type Butane
Burn Time up to 15 minutes
TORCH
Model
INSTRUCTIONS
PRECAUTIONS
Visit our website at:
http://www.harborfreight.com
SAVE THESE
INSTRUCTIONS.
READ ALL
PRECAUTIONS
AND
INSTRUCTIONS.
Copyright© 2006 by Harbor Freight
Tools®. All rights reserved. No portion
of this document or any artwork
contained herein may be reproduced in
any shape or form without the express
written consent of Harbor Freight Tools.
Diagrams within this document may not be
drawn proportionally. Due to continuing
improvements, actual product may differ
slightly from the product described herein.
Tools required for assembly and service
may not be included.
For technical questions or replacement
parts, please call 1-800-444-3353.
Manual Revised 10a
94185
AND
UNPACKING
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at 1-800-444-3353 as
soon as possible.
IMPORTANT SAFETY
INFORMATION
Wear ANSI-approved safety goggles 1.
and heavy-duty work gloves during
assembly.
Use only with butane fuel.2.
Do not aim Pencil Torch at yourself, 3.
others or animals.
Do not aim at ammable materials.4.
Keep hands and ngers away from 5.
path of ame and from hot tip.
The brass components of this product 6.
contain lead, a chemical known to
the State of California to cause birth
defects (or other reproductive harm).
(California Health & Safety code §
25249.5, et seq.)
Use as intended only. Do not modify 7.
or use for purpose for which is was
not intended.
Keep away from children. This 8.
product is not a toy. Do not allow
children to play with or near this item.
Inspect before every use; do not 9.
use if parts are loose or damaged.
If gas odor is detected during use,
immediately shut off Pencil Torch.
Extinguish all open ames and, once
cooled, check all connections for
gas leaks.
Turn off after every use. Allow 10.
Pencil Torch to cool completely
before storing.
Do not store any ammable 11.
liquids or materials in area
surrounding Pencil Torch or work
area.
Store Pencil Torch in a dry, safe 12.
location out of reach of children.
Maintain product labels and 13.
nameplates. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a
replacement.
OPERATION
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section
at the beginning of this
document including all
text under subheadings
therein before set up or
use of this product.
the torch to stabilize for about 5
minutes before operating.
To light Pencil Torch, tilt the tip 4.
upward slightly, but away from
your face and any ammable
objects, and turn the Brass Valve
clockwise to “ON”. Listen for the
sound of owing gas.
Be careful to keep ngers
away from the path of the
ame. Move a lit match ame to
the tip to ignite the Torch. Once
lit, the size of the ame can be
adjusted by rotating the Brass
Valve.
To turn off, rotate the Brass 5.
Valve counterclockwise fully to
the OFF position.
When done using this product, 6.
allow it to completely cool down,
and store it in a safe location that
is out of reach of children.
Note: Replacement parts are not
available for this item. Discard
and do not use if leaking,
damaged, parts are missing.
TipCylinder
Brass
Valve
Note: Torch is supplied empty for
safety reasons.
Rotate the Brass Valve 1.
counterclockwise fully to the
OFF position.
Turn the torch so that the ll port 2.
is on top. Add butane fuel to the
ll port. Only use butane fuel
with this product! The Torch
will ll with fuel in about ve
seconds.
Wipe off any spilled fuel with a 3.
cloth, put away the butane fuel,
and allow the butane fuel inside
Fill Port
(in bottom)
Page 2 For technical questions, please call 1-800-444-3353. SKU 94185
Loading...