Harbor Freight Tools Over the Wheel Tie Down Bonnet Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

ITEM 97230

REV 15b

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

IMPORTANT SAFETY INFORMATION

General Safety Warnings

1. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2. Keep children and bystanders away while securing the Tie Down.

Distractions can cause you to lose control.

3. Stay alert, watch what you are doing and use common sense when connecting the Tie Down. Do not use it to secure an object while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention

while attaching may result in serious personal injury.

4. Use safety equipment. Always wear eye protection. Safety equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

5. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the Tie Down in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

7. Lock Handle down before use.

8. Do not exceed the working load of 3,333 pounds.

9. Obey all D.O.T. regulations regarding use.

10. This strap is intended for use in a looped connection to secure wheels during transit. It is not to be used for lifting operations.

11. Do not force the Tie Down. Use the correct product for your application.

12. Maintain Tie Downs. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect its operation. If damaged, have the Tie Down repaired before use. Many accidents are caused

by poorly maintained products.

13. Use the Tie Down in accordance with these instructions and in the manner intended for the particular type of product, taking into account the working conditions and the work to be performed. Use of the product for

operations different from those intended could result in a hazardous situation.

14. Maintain labels and nameplates on the Tie Down. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

15. This product is not a toy. Keep it out of reach of children.

16. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be

supplied by the operator.

Page 2Item 97230 For technical questions, please call 1-888-866-5797.

+ 2 hidden pages