Harbor Freight Tools Multi Position Magnetic Base Product manual
MAGNETIC BASE
WITH FINE ADJUSTMENT
5645
ASSEMBLY & OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 05h, 09i
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model___________ Serial No._____________ Purchase Date_____________
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front cover. Keep the manual and invoice in a
safe and dry place for future reference.
Technical Specications
Product Name: Magnetic Base
Item Number: 5645
Magnetic Pull: 45 Lbs.
IMPORTANT SAFETY INSTRUCTIONS!
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
3. Store idle equipment. When not in use, products must be stored in a dry location. Always lock up the
Airplane and keep out of reach of children.
4. Do not force product. It will do the job better and more safely at the rate for which it was intended. Do
not use inappropriate attachments in an attempt to exceed the tool capacity.
5. Use the right product for the job. Do not attempt to force a small product or attachment to do the work
of a larger industrial product. There are certain applications for which this product was designed. Do not
modify this product and do not use this product for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Wear
restrictive hair covering to contain long hair.
7. Check for damaged parts. Before using, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment
and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified
technician.
8. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of
any other parts will void the warranty. Approved accessories are available from Harbor Freight Tools.
#5645 Page 2
Loading...