Harbor Freight Tools Knotted Wire Wheel Product manual

Knotted Wire Wheel

®

Safety Warnings and Instructions

3491 Mission Oaks Blvd., Camarillo, CA 93011

Copyright© 2004 by Harbor F reight Tools®. All rights reserved. No
portion of this sheet may be reproduced in any shape or form without
the express written consent of Harbor F reight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product.

Save the receipt and these instructions. It is important that you read this

entire instruction sheet to become familiar with these products before you begin
using them.

Appropriate Usage

These wheels are to be

used with an appropriate angle
grinder. They can be used for
roughening, deburring, cleaning
prior to welding, rust and paint
removal, and weld spatter and
corrosion removal.

:SLEEHWLLA

MPR.xaM 005,21

htgneLmirT

metI noitpircseD stonK htdiWecaF

87219

-41/

97219

18219

-41/

28219

”8/7

leetSnobraCdettonK"4

leehWeriW

2

2

leetSnobraCdettonK"

leehWeriW

leetSsselniatSdettonK"4
leehWeriWdaeBregnirtS

leetSsselniatSdettonK"

leehWeriWdaeBregnirtS

snoitacificepSlacinhceT

robrA

mm5.

retemaiDeriW

81

02

03

03

1

/2"

1

/2"

1

/4"

1

/4"

IPT11x”8/5

1. Always wear ANSI approved safety goggles, full face shield and respirator
when working with these tools.

2. BEFORE use, read and adhere to all warnings, safety precautions, and
operating instructions in the owner’s manual f or the appropriate angle grinder
these accessories are to be used with.

3.

The wheel bristles are very sharp and can easily cause skin cuts
and puncture wounds; be extemely careful when unpacking these

products and when handling and using the wheels and brushes.
Always wear gloves when handling and using these wire brushes.

4. Exposure to aluminum oxide (a dust generated from material removing
processes) can result in eye, skin and breathing irritation. Always use a
NIOSH (National Institute for Occupational Safety and Health) approved
respirator and safety goggles. A v oid skin e xposure. Proper v entilation in the
work area is required.

5. Never exceed the 12,500 RPM maximum.

6. Only use these wheels on a tool that they are intended for and that also

has appropriate safety guards in place.

03/04 Made in China.

SA VE THESE WARNINGS.