Harbor Freight Tools Imitation Dome Security Camera with LED Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Imitation

Dome Security Camera

with LED

Visit our website at: http://www.harborfreight.com

REV 14c

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Email our technical support at: productsupport@harborfreight.com

ITEM 95154

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Batteries Required 2 x AA Batteries (not included) Overall Dimensions 4-5/8″ D X 3″ H Mounting Hole Spacing 2.659″ (67.59 mm) center to center

SAFETY WARNINGS AND PRECAUTIONS

WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean and well lit. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use the Imitation Dome Camera in damp or wet locations. Don’t expose to rain. Do not use electrically powered products in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let them handle the Imitation Dome Camera. This product is not a toy.

4. Use the right product for the job. Do not modify this product and do not use this product for a purpose for which it was not intended.

5. Dress properly. Protective, electrically non conductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

6. Use eye protection. Always wear ANSI-approved impact safety goggles during installation.

7. Maintain with care. Keep the Imitation Dome Camera clean for better and safer performance.

8. Stay alert. Watch what you are doing, use common sense. Do not install the Imitation Dome Camera when you are tired.

9. Check for damaged parts. Before using the Imitation Dome Camera, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician.

10. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.

11. Do not install the Imitation Dome Camera if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not install the unit.

12. Only use AA-Batteries. Always properly dispose of used batteries in accordance to the guidelines for waste disposal in your community.

13. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Page 2 For technical questions, please call 1-888-866-5797. Item 95154

+ 2 hidden pages