Harbor Freight Tools HYDROSTAR Quick Start Guide

TIPS

When the
cable hits a
blockage,
retract the
cable back
and forth to
clear the
blockage.

ACCESSORIES

Boring Bulb Cutter

Starting tool for removing
loose objects

Arrow Cutter

Starting tool for cutting
and scraping

If the cable stops
and tension builds,
release foot switch,
wait for tension to
release, then pull
cable back

manually before

proceeding.

Spade Cutter

Finishing tool for scraping
the inside of pipes

OFF

F

C - Cutter

Finishing tool for grease
stoppages and cleaning
pipe walls

QUICK START GUIDE

50 FT. MANUAL FEED DRAIN CLEANER

A. Rotation Switch

OFF

F R

B. Belt Guard

C. Cable Outlet

D. Built-in GFCI

E. Foot Switch

ITEM 68285

NOTICE

20%

RESTOCKING

FEE

ON ALL DRAIN CLEANER

RETURNS

For technical questions, please call 1-800-444-3353

3491 Mission Oaks Blvd. | PO Box 6009 | Camarillo, CA 93011 | [phone]

www.harborfreight.com

12b

WARNING

To prevent serious injury:

Read and understand user manual

before set up and/or use.

OPERATION

OFF

2'

F

1. Wear water and
chemical resistant
gloves inside heavy
duty work gloves

CAUTION

DO NOT PUT ROTATION SWITCH INTO
REVERSE FOR MORE THAN A FEW
SECONDS AT A TIME
Reverse position is only to momentarily
change direction to free jammed cable

2. Install head 3. Position within 2 ft of
drain opening

R

4. Plug in and press
reset button on GFCI

7. Hold cable

5. Insert 1 ft into drain

8. Press foot switch

SEE TIPS ON BACK

6.

Set to forward

9. Feed cable into drain