Harbor Freight Tools Hitch Mount Vise Plate Product manual

SPECIFICATIONS

Square Steel Tube 22”L x 2”

Vise Mount Plate 7-7/8"L x 7-7/8W x 3/16"T

Vise Mounting Holes 1-7/8"L x 5/8"W (4)

IMPORTANT SAFETY

INFORMATION

Assembly Precautions

1. Assemble only according to
these instructions. Improper
assembly can create hazards.

2. Fits any standard 2" hitch receiver.

3. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly and set-up.

4. Keep assembly area clean and well lit.

5. Keep bystanders out of the
area during assembly.

6. Do not assemble when tired
or when under the influence
of drugs or medication.

ASSEMBLY

INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION
section at the beginning of
this document including
all text under subheadings
therein before set up or
use of this product.

1. Wear ANSI-approved safety
goggles and heavy-duty work
gloves during assembly and use.

Angled End of

Receiver Retaining Pin (5)

Receiver Retaining

Receiver Tube (1)

Fig. 1

Pull out the Hairpin Clip (2) and slide

2.
out the Receiver Retaining Pin (5).

Pin (5)

Hairpin
Clip (2)

Use Precautions

1. This product is NOT designed
to pull, tow or push.

2. This product is not a toy. Do not allow
children to play with or near this item.

3. Use as intended only.

4. Inspect before every use; do not use
if parts are loose or damaged.

Slide the Receiver Tube (1) into the

5. Maintain product labels and
nameplates. These carry important
safety information. If unreadable or

3.
vehicle’s receiver with the flat side of the
Vise Mount Plate facing up. (See Fig. 3.)

missing, contact Harbor Freight Tools
for a replacement.

Page 2 For technical questions, please call 1-888-866-5797. Item 66260

Receiver Retaining

Fig. 2

Pin Holes