Harbor Freight Tools Heavy Duty Bench Grinder Pedestal Product manual
Bench Grinder
Pedestal
Specications
Table Height 33″
Table Size 11″ x 10-1/4″
Important Safety Information
68321 Grinder Pedestal
INSTRUCTIONS AND
PRECAUTIONS
Visit our website at:
http://www.harborfreight.com
Read this material before
using this product.
Failure to do so can result
in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure
that the product is intact and
undamaged.
If any parts are missing or broken,
please call 1‑800‑444‑3353
as soon as possible.
Copyright© 2011 by Harbor Freight Tools®.
All rights reserved. No portion of this document
or any artwork contained herein may be
reproduced in any shape or form without the
express written consent of Harbor Freight
Tools. Diagrams within this document may
not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly
from the product described herein. Tools required
for assembly and service may not be included.
For technical questions or replacement
parts, please call 1‑800‑444‑3353.
Assembly Precautions
1. Assemble only according to
these instructions. Improper
assembly can create hazards.
2. Wear ANSI‑approved safety
goggles and heavy‑duty work
gloves during assembly.
3. Keep assembly area
clean and well lit.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired
or when under the inuence
of drugs or medication.
Use Precautions
1. This product is not a toy.
Do not allow children to play
with or near this item.
2. Use as intended only.
3. Inspect before every use; do not
use if parts are loose or damaged.
4. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing,
contact Harbor Freight Tools
for a replacement.
Assembly Instructions
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
1. Insert Column (2) into Base (1).
Secure in place with three Bolts (6).
Turn the Column so that the
warning label is oriented properly.
2. Slide the Basin Holder (3)
onto the Column from the top.
Adjust to desired position and
secure in place with Bolt.
3. Place Top (5) onto the top
of the Column and secure
it in place with a Bolt.
Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 68321
Loading...