Harbor Freight Tools Hand Riveter Set Product manual

HAND RIVETER

Model

INSTRUCTION MANUAL

Safety Warnings and Precautions:

KE E P C H IL DR E N AWAY F RO M 1.
PRODUCT USAGE AREA. Do not

allow children to handle this product.
Always wear ANSI approved safety 2.

goggles when working with hand tools.

USE THE RIGHT PRODUCT FOR 3.
THE RIGHT JOB. There are certain

applications for which this product was
designed. Do not use this product for a
purpose for which it was not intended.

N E V E R P O I N T T H E L O A D E D 4.
HAND RIVETER AT A PERSON OR
ANIMAL.

UNPACKING

When unpacking, check to make sure all
parts are included (see below). If any parts
are missing, please call Harbor Freight
Tools at the number shown on the bottom
of this manual as soon as possible.
Kit includes: One Hand Riveter. Four
sizes of rivet holders. One bag of each of
four sizes of rivets: 2.4 mm 3/32”, 3.2 mm
1/8”, 4.0 mm 5/32”, 4.8 mm 3/16”. One
Wrench.

Visit our website at: http://www.harborfreight.com

38353

INSTRUCTIONS:

To change the Rivet Holder size use
the Wrench located in the lower handle.
Unscrew the Rivet Hold er usin g the
Wrench and insert the desired Rivet Holder
that is located on the handle and tighten
with wrench.

See page 2 for diagrams.
Diagram (A): Drill hole the size of the rivet

to be used.
Diagram (B): Place rivet head side down
in hole that is same size.
Diagram (C): Open the Riveter handles
as wide as possible. Slide the shaft of the
rivet into the Rivet Holder.
Diagram (D): Squeeze the Riveter handles
together; this will break the rivet shaft.
Diagram (E): Open the Riveter handles as
wide as possible; this will enable the rivet
shaft to disengage. When not in use, lock
the Riveter handles in place with the wire
lock, and store in a safe, dry place away
from children.

Read this material before using this product.

Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Copyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within this
manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 10c

Diagram A

Diagram B

Diagram C

Diagram D

Diagram E

INVOICE NO.___________________ PURCHASE DATE:____________________

SKU 38353 Page 2