12V EMERGENCY VEHICLE
REVOLVING LIGHT
ASSEMBLY AND OPERATION INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Power Source 12V DC
Material Polycarbonate lens, magnetic base
Magnetic Base Diameter 2.76”
Bulb Type 12V10 Krypton
Rubber Base 1/2” tear drop shape
Flashes Per Minute 90-120
Power Cord Stretchable to 29-1/2” Long
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Do not use this product in rain or wet conditions. 2. Water entering this product
will increase the risk of electric shock.
Stay alert. Watch what you are doing, and use common sense when using this 3.
product. Do not use this product while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating this product may
result in serious personal injury.
Keep out of the reach of any children. A responsible adult should be present if 4.
children are in the area while the Revolving Emergency Light is being used.
Do not use the Revolving Emergency Light if the On/Off Switch does not turn 5.
it on or off. Any product that cannot be controlled with the On/Off Switch is dan-
gerous and must be replaced.
For technical questions, please call 1-800-444-3353.
REV 07K
Page 2SKU 96279
Disconnect the Power Cord Plug from the power source before making any 6.
adjustments, changing accessories, or storing the Revolving Emergency Light.
Always unplug the Revolving Emergency Light from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
Store idle equipment. 7. When not in use, make sure Revolving Emergency Light
is cool to the touch and then store in a dry location to inhibit rust. Store an idle
Revolving Emergency Light out of reach of children and other untrained persons.
This product is dangerous in the hands of untrained users.
Check for breakage of parts, and any other condition that may affect the Re-8.
volving Emergency Light operation. If damaged, have it serviced before using.
Many accidents are caused by poorly maintained products.
Tool service must be performed only by qualified repair personnel. 9. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instruc-10.
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury. The fuse in this unit must only be replaced with
another Fuse of the same type.
Maintain labels and nameplates on the tool.11. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Never leave the Revolving Emergency Light unattended when it is plugged 12.
in. Turn off the Revolving Emergency Light, and unplug it from its electrical outlet
before leaving.
Do not allow the Revolving Emergency Light to be exposed to fire or high heat 13.
as this may result in an explosion.
Only plug into a 12 V DC Cigarette Lighter Adapter receptacle.14.
Do not deplete the vehicle battery. 15. If possible, only use this product when the
vehicle’s engine is running. If the engine is not running, do not use the Light for
and extended period of time.
Make sure the vehicle lighter socket has a minimum capacity of 12 amps. 16. Do
not use a socket extension or pigtail to operate this Light.
Follow all local and state laws regarding vehicles and lighting systems for 17.
vehicles, check with your local Department of Motor Vehicles or police station
for guidelines.
The Revolving Emergency Light is not waterproof. 18. Do not submerge the Light,
or use it in extremely wet conditions.
For technical questions, please call 1-800-444-3353.
Page 3SKU 96279