Page 1
APPLE PEELER
Model
96153
ASSEMBLY AND OPERATION INSTRUCTIONS
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within
this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein. Tools
required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09k
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2
SPECIFICATIONS
Construction
Dimensions 8” x 7” x 5”
Weight 0.8 lb.
Case is polystyrene plastic
Blades (extra blade included) and Spikes are
stainless steel.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. 1. Cluttered counters and dark areas invite
accidents.
Keep children and visitors away while using this product. 2. Distractions can cause
accidents. Caution: Sharp spikes and blade can lead to injury. Children must be
kept away from this product.
Stay alert. 3. Watch what you are doing and use common sense when operating. Do
not use while tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating could result in personal injury.
Dress properly. 4. Do not wear loose clothing or jewelry. Contain long hair. Loose
clothes, jewelry, or long hair can be caught in moving parts.
Do not force the appliance. 5. The correct appliance will do the job better and safer
at the rate for which it is designed. Do not force or use the appliance for a purpose
for which it is not intended.
Store idle appliances out of reach of children and other untrained persons. 6.
Appliances are dangerous in the hands of untrained users.
For technical questions, please call 1-800-444-3353.
Page 2SKU 96153
Page 3
Maintain appliances with care. 7. Keep blade sharp and clean. Properly maintained
appliances with a sharp cutting edge are less likely to bind and are easier to control.
Do not use a damaged appliance.
Check for misalignment or binding of moving parts, breakage of parts, and any 8.
other condition that may affect the appliance’s operation. Many accidents are
caused by poorly maintained appliances.
Maintain labels and nameplates on the appliance. 9. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Appliances for a replace-
ment.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Appliances at the number shown
on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
Press Handle (1) onto Crankshaft (8). Apple Peeler is ready for use.1.
OPERATION INSTRUCTIONS
Clean each part with soap and water before using. Dry thoroughly.
Caution: Blade and Spikes are extremely sharp. Be careful when working near them.
Place Apple Peeler on a clean and level surface and rotate Handle until the Blade is 1.
at the bottom position of it’s arc.
Push apple down on Spikes (7) and remove Blade Cover (5).2.
Turn handle (1) clockwise. Blade will cut peel away from apple, from bottom to top, 3.
without further adjustment.
When apple is peeled, carefully remove from spikes.4.
Clean Blade and carefully replace Blade Cover.5.
Changing Blades
Put Blade Cover on Blade. Hook finger through loop at top of Blade and pull until 1.
the Blade and Blade Cover release. Be wary of the Spikes.
Remove Blade Cover and safely dispose of old Blade. Put Cover on new Blade.2.
Slide Blade and Cover back onto peeler arm with Blade pointed downwards.3.
Cleaning
Apple Peeler is 1. NOT dishwasher safe. Clean only by hand with a soft cloth and mild
detergent.
REV 07i
For technical questions, please call 1-800-444-3353.
Page 3SKU 96153
Page 4
PARTS AND ASSEMBLY DIAGRAM
Part Description
1 Handle
2 Knob
3 Retainer ring
4 Blade
4
7
5
Part Description
5 Blade Cover
6 Main Unit
7 Spikes
8 Crankshaft
1
8
6
3
2
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE APPLIANCE ONLY. NEITHER
THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
For technical questions, please call 1-800-444-3353.
Page 4SKU 96153
Loading...