Harbor Freight Tools 96144 User Manual
12V HEATER/FAN
Model
96144
ASSEMBLY AND OPERATION INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
REVISED 2008d
SPECIFICATIONS
Overall Dimensions 7-1/4” W x 5-1/2” Deep x 2-3/16” H
Handle Dimensions 3” L x 1” W
Fuse 15 Amp
Power Source 12VDC, 13 Amps
Mounting Holes (2) 5/32” Diameter
Includes
Power Cord
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
(1) Cigarette Lighter Plug Adapter
with green power LED indicator
87” L with 15 Amp in-line blade
fuse
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Do not use this product in rain or wet conditions. 2. Water entering this product
will increase the risk of electric shock.
Stay alert. Watch what you are doing, and use common sense when using this 3.
product. Do not use this product while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating this product may
result in serious personal injury.
Keep out of the reach of any children. 4. A responsible adult should be present if
children are in the area while the Heater/Fan is being used.
Do not force the Heater/Fan. Use the correct product for your application. 5.
The correct Heater/Fan will do the job better and safer at the rate for which it is
For technical questions, please call 1-800-444-3353.
Page 2SKU 96144
designed. Do not force the Heater/Fan and do not use it for a purpose for which it
is not intended.
Do not use the Heater/Fan if the On/Off Switch does not turn it on or off.6. Any
product that cannot be controlled with the On/Off Switch is dangerous and must be
replaced or repaired.
Disconnect the Power Cord Plug from the power source before making any 7.
adjustments, changing accessories, or storing the Heater/Fan. Always unplug
the Heater/Fan from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
Store idle equipment. 8. When not in use, make sure Heater/Fan is cool to the touch
and then store in a dry location to inhibit rust. Always lock up the Heater and keep
out of reach of children. Store an idle Heater/Fan out of reach of children and other
untrained persons. This product is dangerous in the hands of untrained users.
Check for breakage of parts, and any other condition that may affect the 9.
Heater/Fan operation. If damaged, have it serviced before using. Many ac-
cidents are caused by poorly maintained products.
Tool service must be performed only by qualified repair personnel. 10. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
Only a qualified service technician should repair this product. Follow instruc-11.
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury. The fuse in this unit must only be replaced with
another 15 Amp Fast Acting Fuse of the same type.
Maintain labels and nameplates on the tool.12. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Never leave the Heater/Fan unattended when it is plugged in. 13. Turn off the
Heater/Fan, and unplug it from its electrical outlet before leaving.
Do not allow the Heater/Fan to be exposed to fire or high heat as this may 14.
result in an explosion.
Only plug into a DC12V Cigarette Lighter Adapter receptacle.15.
Do not block air vents. The Heater/Fan gets hot when operating, and blocking 16.
the vents will cause overheating resulting in explosion or injury.
Risk of Burns! 17. Keep children and pets away from this unit while it is hot. Do
not place hands or feet near the vent.
Do not deplete the vehicle battery. 18. Only use this Heater when the vehicle’s en-
gine is running.
For technical questions, please call 1-800-444-3353.
Page 3SKU 96144
Loading...