Harbor Freight Tools 96141 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

REV 14l

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

SPECIFICATIONS

Light Source 16, 12000 MCD LED’s

AC/DC Adapter Input 120 V~, 60 Hz, 7 W

AC/DC Adapter Output 9.5 VDC, 300 mA

Rechargeable Battery

LED Indicators

Charging Time 12 Hours

Approximate Run Time (fully charged)

Overall Dimensions 8-5/8” L x 3-5/16” W x 9” H

Wire Length 69”

Weight 2.5 lb.

Special Features

3FM 2.8, constant voltage charge, cycle use: 7.2-7.5V, standby use: 6.75-6.9V

Green (charged) Red (charging)

High Intensity Mode-12 hours; Low Intensity Mode-28 hours

Low voltage and overcharging protection, auto shut off when battery is fully charged Cigarette Plug Adapter

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

1. Keep your work area clean and well lit. Cluttered benches and

dark areas invite accidents.

2. Keep bystanders, children, and visitors away while using this product. Distractions can cause you to lose control.

3. Stay alert. Watch what you are doing, and use

common sense when operating the Spotlight. Do not use this product while tired or under the influence of drugs, alcohol, or medication.

A moment of inattention while operating this product may result in serious personal injury.

4. Do not force the product. Use the correct product for your application. The correct product will do the job better and safer at the rate for which it is designed. Do not force the product and do not use the product for a purpose for which it is not intended.

5. Store idle products out of reach of children and other untrained persons. This product is dangerous in the hands of untrained users. Never point the light beam directly at people or animals.

serious injury.

SAVE THESE INSTRUCTIONS

6. Maintain this product with care. Do not use a damaged product. Tag damaged products “Do not use” until repaired.

7. Check for misalignment or binding of

moving parts, breakage of parts, and any other condition that may affect the product’s operation. If damaged, have the product serviced before using. Many accidents are

caused by poorly maintained products.

8. Maintain labels and nameplates on the

product. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

9. Maintain a safe working environment. Make

sure there is adequate surrounding workspace. Do not use this product in a damp or wet location.

10. WARNING: The cord of this product contains lead and/or di (2-ethylhexyl) phthalate (DEHP), chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)

Page 2SKU 96141 For technical questions, please call 1-888-866-5797.

+ 2 hidden pages