Harbor Freight Tools 96136 Product manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SPECIFICATIONS
Display/Electronic Circuit Board Housing 1″ X 1-7/8″ (Digital)
On/Off Type Push Button
Unit Of Measure And Increments
Power Source 2 - AAA, 1.5V Batteries (not included)
Measurement Clear Device Clear/Hold Button
Number Of Storing Values 2 with Push Button Selector
Handle Length
Wheel Size 5-5/8″ Diameter
Feet, 1″ to 9999 Feet 11 Inch (6 digits)
Meters, 1 CM to 9999.99 Meters
14-1/4″ to 34″ (Telescopic Adjustment)
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Write the product’s serial number in the back of the manual near the
assembly diagram, or write month and year of purchase if product has no number. Keep
this manual and invoice in a safe and dry place for future reference.
GENERAL AND SPECIFIC SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in serious
injury.
SAVE THESE INSTRUCTIONS
1. WARNING: To prevent leakage and/or explosion, position batteries in proper
polarity and do not install batteries of different types, charge levels or capacities
together.
2. Wear ANSI-approved safety goggles during use of this Digital Measure Wheel.
3. Keep this Measure Wheel out of the reach of children.
4. This Measure Wheel is for estimates only.
5. Do not mix old with new batteries.
6. Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
For technical questions, please call 1-888-866-5797.
Page 2Item 96136
Loading...