Page 1
6” OFF ROAD LIGHT BAR
Model
95953
LOUD SPEAKER
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
WARNING! Read all instructions
Failure to follow all instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
1.
2.
1.
2.
3.
1.
2.
Keep children and bystanders away while installing. Distractions can
cause you to lose control.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
PERSONAL SAFETY
Wear ANSI-approved safety goggles.
Stay alert and use common sense when operating. Do not use when tired or
under the inuence of drugs, alcohol or medication.
Dress properly. Do not wear loose clothing or jewelry when installing. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
PRODUCT USE AND CARE
This product is not a toy. Keep it out of reach of children.
Use the correct product for your application. The correct product will do the job
better and safer at the rate for which it was designed. Do not modify this product
or use it for a purpose for which it is not intended.
3.
Check for broken parts and any other condition that may affect the product’s
operation.
Page 2SKU 95953 For technical questions, please call 1-800-444-3353.
Page 3
SERVICE
1.
1.
2.
Maintain labels and nameplates on the product. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
MISCELLANEOUS
Exposure to noise levels above 85 dB is hazardous to hearing.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS
Rated Power 15RMS (Watts)
Maximum Input Power 30 Watts
Frequency Response 80 - 20,000 Hz
Impedance 4 ohms
Decibel Sensitivity 86 dB
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
Page 3SKU 95953 For technical questions, please call 1-800-444-3353.
Page 4
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
Mounting
1.
2.
3.
4.
5.
6.
7.
8.
If you are not completely comfortable doing this type of mounting and wiring
project, seek help from a qualied service technician.
Consult the vehicle owner’s manual and the manual for the stereo system prior to
installing this device.
Turn the vehicle off and disconnect the negative battery terminal.
Select a proper location to mount the Speaker and mark it. Keep in mind that the
Wires from the Speaker must be able to reach a pre-existing speaker terminal.
The Speaker can be top or bottom mounted. If there is no hole for mounting the
Speaker, then a hole must be drilled at the point selected.
The speaker and power lines must be protected at contact points with the
vehicle’s body to prevent possible shorting.
Installation may require that a hole be drilled through which to insert the wiring.
The black wire with the white stripe is the positive connection and must be
connected to the positive terminal on the pre-existing speaker. The solid black
wire connects to the ground or negative terminal.
Properly insulate and cap off all wires.
9.
The unit will now broadcast whenever the pre-existing speaker does.
Page 4SKU 95953 For technical questions, please call 1-800-444-3353.
Page 5
MAINTENANCE AND SERVICING
CAUTIONCAUTION
not use a damaged product. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
Damaged products can fail, causing personal injury. Do
1.
2.
BEFORE EACH USE, inspect the general condition of the product. Check
for loose screws, misalignment or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other condition that may affect its safe
operation.
AFTER USE, clean external surfaces of the product with clean, moist cloth.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and
durability standards, and warrants to the original purchaser that this product is free from defects in
materials and workmanship for the period of 90 days from the date of purchase. This warranty does
not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs
or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or
to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or
for incidental, contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint must
accompany the merchandise. If our inspection veries the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if we
determine there is no defect, or that the defect resulted from causes not within the scope of our
warranty, then you must bear the cost of returning the product.
This warranty gives you specic legal rights and you may also have other rights which vary
from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
Page 5SKU 95953 For technical questions, please call 1-800-444-3353.
Page 6
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
PARTS LIST
Part Description Qty
1 Cover 1
2 Speaker Cover 1
3 Speaker 1
4 Wiring Kit 1
5 Housing 1
6 Ring 2
7 Gasket 1
4
1
5
2 3
6
7
Page 6SKU 95953 For technical questions, please call 1-800-444-3353.
Loading...