Harbor Freight Tools 95923 Owner's Manual
6 - COLOR AIR BRUSH KIT
WITH HOLDER
Model
95923
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10h
SPECIFICATIONS
Air Brush: (Quantity - 6)
Overall dimensions: 5-11/16” L X 3/8” W X 1-1/2” H
Aluminum Cap colors: Black, Green, Purple, Gold yellow, Red, Dark blue.
Air Inlet size: 1/8” X 28 NPS Thread
Nozzle: .35mm = .01377949”
Working Air Pressure: 15 to 50 PSI
Hose Maximum Air Pressure: 85 PSI
Air flow adjustable control: Manometer finger lever pressure regulator
Air Hose dimensions: 6’- 2-1/2” L X .275” O.D. (Quantity - 6)
Air Hose thread fitting: 1/8”-28 NPS
Wrenches: 7mm (Quantity - 3)
Glass Jar capacity: 22cc (Quantity - 6)
Glass Jar dimensions: 2-5/8” H X 1-3/8 Diameter
Air Brush Holder:
Stand dimensions: 8-1/4” H X 5-1/8 Diameter
Stand capacity: 8 Air Brushes
Air Fittings: 7, one Air inlet and six outlets
Pressure Gauge markings: 0-140 PSI (20 increments), 0-10 bar (2 increments)
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Write the product’s serial number in the back of the manual
near the assembly diagram, or write month and year of purchase if product has
no serial number. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
For technical questions, please call 1-800-444-3353.
REV 07d
Page 2SKU 95923
WORK AREA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas
invite accidents.
Keep bystanders, children, and visitors away while operating. 2. Provide barriers
or shields as needed.
Wear protection: 3. Always wear ANSI-approved safety goggles when using, or servic-
ing this Air Brush Kit. If you are working in enclosed spaces, it is recommended that
you wear an approved breathing air respirator. A dust mask will not filter fumes.
Do not exceed maximum working air pressure of 50 PSI.4.
Do not operate in explosive atmospheres, such as in presence of flamma-5.
ble liquids, gases, or dust. Doing so may create sparks which may ignite dust
or fumes.
Do not operate near appliances that may have open flame pilot lights. 6. These
may ignite fumes from the Air Brushes, especially if you are using paint products
that are thinned or cleaned with flammable solvents.
Store idle tools out of the reach of children and untrained users. 7. These Air
Brushes are not toys and may be damaged if not used properly. Never allow Children to play with this product.
Check these Air Brushes for any condition that may affect the tool’s operation. 8.
If damaged, have the tool serviced before using.
SERVICE
This Air Brush Kit should be serviced only by qualified repair personnel. 1.
Service or maintenance performed by unqualified personnel could result in a risk
of damage to the tool.
When servicing these Air Brushes or Air Brush Holder, use only identical 2.
replacement parts. Follow instructions in the “Inspection, Maintenance, And
Cleaning” section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of damage to the tool.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the tool. 1. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
These Air Brushes are for spraying paint only. 2. Never use them for spraying
gasoline, kerosene or any other flammable solvent.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95923
Loading...